homeserver.yaml.j2 85.3 KB
Newer Older
1
# vim:ft=yaml sw=2 et:
2

3
4
5
6
7
8
9
10
11
12
13
# Configuration options that take a time period can be set using a number
# followed by a letter. Letters have the following meanings:
# s = second
# m = minute
# h = hour
# d = day
# w = week
# y = year
# For example, setting redaction_retention_period: 5m would remove redacted
# messages from the database after 5 minutes, rather than 5 months.

14
15
16
17
18
19
20
21
22
23
################################################################################

# Configuration file for Synapse.
#
# This is a YAML file: see [1] for a quick introduction. Note in particular
# that *indentation is important*: all the elements of a list or dictionary
# should have the same indentation.
#
# [1] https://docs.ansible.com/ansible/latest/reference_appendices/YAMLSyntax.html

24
25
26
27
28
29
## Server ##

# The domain name of the server, with optional explicit port.
# This is used by remote servers to connect to this server,
# e.g. matrix.org, localhost:8080, etc.
# This is also the last part of your UserID.
30
#
31
server_name: "{{ matrix_server_name }}"
32
33

# When running as a daemon, the file to store the pid in
34
#
35
#pid_file: DATADIR/homeserver.pid
36

37
38
# The absolute URL to the web client which /_matrix/client will redirect
# to if 'webclient' is configured under the 'listeners' configuration.
39
#
40
41
42
43
44
45
# This option can be also set to the filesystem path to the web client
# which will be served at /_matrix/client/ if 'webclient' is configured
# under the 'listeners' configuration, however this is a security risk:
# https://github.com/matrix-org/synapse#security-note
#
#web_client_location: https://riot.example.com/
46

47
48
49
50
51
# The public-facing base URL that clients use to access this HS
# (not including _matrix/...). This is the same URL a user would
# enter into the 'custom HS URL' field on their client. If you
# use synapse with a reverse proxy, this should be the URL to reach
# synapse via the proxy.
52
#
53
public_baseurl: https://{{ matrix_domain }}/
54
55
56
57

# Set the soft limit on the number of file descriptors synapse can use
# Zero is used to indicate synapse should set the soft limit to the
# hard limit.
58
59
#
#soft_file_limit: 0
60

61
# Set to false to disable presence tracking on this homeserver.
62
#
63
64
65
66
67
68
69
70
71
72
#use_presence: false

# Whether to require authentication to retrieve profile data (avatars,
# display names) of other users through the client API. Defaults to
# 'false'. Note that profile data is also available via the federation
# API, so this setting is of limited value if federation is enabled on
# the server.
#
#require_auth_for_profile_requests: true

73
74
75
76
77
78
79
# Uncomment to require a user to share a room with another user in order
# to retrieve their profile information. Only checked on Client-Server
# requests. Profile requests from other servers should be checked by the
# requesting server. Defaults to 'false'.
#
#limit_profile_requests_to_users_who_share_rooms: true

80
81
82
# If set to 'true', removes the need for authentication to access the server's
# public rooms directory through the client API, meaning that anyone can
# query the room directory. Defaults to 'false'.
83
#
84
allow_public_rooms_without_auth: true
85

86
87
# If set to 'true', allows any other homeserver to fetch the server's public
# rooms directory via federation. Defaults to 'false'.
88
#
89
allow_public_rooms_over_federation: true
90

91
92
93
94
95
96
97
98
# The default room version for newly created rooms.
#
# Known room versions are listed here:
# https://matrix.org/docs/spec/#complete-list-of-room-versions
#
# For example, for room version 1, default_room_version should be set
# to "1".
#
99
#default_room_version: "5"
100

101
# The GC threshold parameters to pass to `gc.set_threshold`, if defined
102
103
#
#gc_thresholds: [700, 10, 10]
104

105
# Set the limit on the returned events in the timeline in the get
106
107
108
# and sync operations. The default value is 100. -1 means no upper limit.
#
# Uncomment the following to increase the limit to 5000.
109
110
#
#filter_timeline_limit: 5000
111
112
113

# Whether room invites to users on this server should be blocked
# (except those sent by local server admins). The default is False.
114
#
115
#block_non_admin_invites: true
116
117
118
119
120
121
122

# Room searching
#
# If disabled, new messages will not be indexed for searching and users
# will receive errors when searching for messages. Defaults to enabled.
#
#enable_search: false
123

124
125
# List of ports that Synapse should listen on, their purpose and their
# configuration.
126
127
128
129
130
131
132
133
134
135
#
# Options for each listener include:
#
#   port: the TCP port to bind to
#
#   bind_addresses: a list of local addresses to listen on. The default is
#       'all local interfaces'.
#
#   type: the type of listener. Normally 'http', but other valid options are:
#       'manhole' (see docs/manhole.md),
136
137
#       'metrics' (see docs/metrics-howto.md),
#       'replication' (see docs/workers.md).
138
139
140
141
142
143
144
145
146
147
148
149
150
151
#
#   tls: set to true to enable TLS for this listener. Will use the TLS
#       key/cert specified in tls_private_key_path / tls_certificate_path.
#
#   x_forwarded: Only valid for an 'http' listener. Set to true to use the
#       X-Forwarded-For header as the client IP. Useful when Synapse is
#       behind a reverse-proxy.
#
#   resources: Only valid for an 'http' listener. A list of resources to host
#       on this port. Options for each resource are:
#
#       names: a list of names of HTTP resources. See below for a list of
#           valid resource names.
#
152
#       compress: set to true to enable HTTP compression for this resource.
153
154
155
156
157
158
#
#   additional_resources: Only valid for an 'http' listener. A map of
#        additional endpoints which should be loaded via dynamic modules.
#
# Valid resource names are:
#
159
160
#   client: the client-server API (/_matrix/client), and the synapse admin
#       API (/_synapse/admin). Also implies 'media' and 'static'.
161
162
163
164
165
166
167
168
169
170
171
#
#   consent: user consent forms (/_matrix/consent). See
#       docs/consent_tracking.md.
#
#   federation: the server-server API (/_matrix/federation). Also implies
#       'media', 'keys', 'openid'
#
#   keys: the key discovery API (/_matrix/keys).
#
#   media: the media API (/_matrix/media).
#
172
#   metrics: the metrics interface. See docs/metrics-howto.md.
173
174
175
176
#
#   openid: OpenID authentication.
#
#   replication: the HTTP replication API (/_synapse/replication). See
177
#       docs/workers.md.
178
179
180
181
182
183
#
#   static: static resources under synapse/static (/_matrix/static). (Mostly
#       useful for 'fallback authentication'.)
#
#   webclient: A web client. Requires web_client_location to be set.
#
184
listeners:
185
186
187
188
189
190
  # TLS-enabled listener: for when matrix traffic is sent directly to synapse.
  #
  # Disabled by default. To enable it, uncomment the following. (Note that you
  # will also need to give Synapse a TLS key and certificate: see the TLS section
  # below.)
  #
191
192
193
194
195
  #- port: 8448
  #  type: http
  #  tls: true
  #  resources:
  #    - names: [client, federation]
196
197
198
199
200

  # Unsecure HTTP listener: for when matrix traffic passes through a reverse proxy
  # that unwraps TLS.
  #
  # If you plan to use a reverse proxy, please see
201
  # https://github.com/matrix-org/synapse/blob/master/docs/reverse_proxy.md.
202
  #
203
204
205
206
  - port: 8008
    tls: false
    type: http
    x_forwarded: true
207
    bind_addresses: ['::1', '127.0.0.1']
208
209

    resources:
210
      - names: [client, federation]
211
212
        compress: false

213
    # example additional_resources:
214
    #
215
216
217
218
    #additional_resources:
    #  "/_matrix/my/custom/endpoint":
    #    module: my_module.CustomRequestHandler
    #    config: {}
219

220
221
222
223
224
225
226
  - port: 9093
    type: http
    bind_addresses: ['::1', '127.0.0.1']
    resources:
      - names: [replication]
        compress: false

227
228
  # Turn on the twisted ssh manhole service on localhost on the given
  # port.
229
230
231
232
233
  #
  #- port: 9000
  #  bind_addresses: ['::1', '127.0.0.1']
  #  type: manhole

234
235
236
237
238
239
240
241
242
243
244
245
# Forward extremities can build up in a room due to networking delays between
# homeservers. Once this happens in a large room, calculation of the state of
# that room can become quite expensive. To mitigate this, once the number of
# forward extremities reaches a given threshold, Synapse will send an
# org.matrix.dummy_event event, which will reduce the forward extremities
# in the room.
#
# This setting defines the threshold (i.e. number of forward extremities in the
# room) at which dummy events are sent. The default value is 10.
#
#dummy_events_threshold: 5

246
247

## Homeserver blocking ##
248

249
250
# How to reach the server admin, used in ResourceLimitError
#
251
252
253
#admin_contact: 'mailto:admin@server.com'

# Global blocking
254
#
255
#hs_disabled: false
256
257
#hs_disabled_message: 'Human readable reason for why the HS is blocked'

258
259
# Monthly Active User Blocking
#
260
261
262
263
# Used in cases where the admin or server owner wants to limit to the
# number of monthly active users.
#
# 'limit_usage_by_mau' disables/enables monthly active user blocking. When
264
# enabled and a limit is reached the server returns a 'ResourceLimitError'
265
266
267
268
269
270
271
272
273
274
275
# with error type Codes.RESOURCE_LIMIT_EXCEEDED
#
# 'max_mau_value' is the hard limit of monthly active users above which
# the server will start blocking user actions.
#
# 'mau_trial_days' is a means to add a grace period for active users. It
# means that users must be active for this number of days before they
# can be considered active and guards against the case where lots of users
# sign up in a short space of time never to return after their initial
# session.
#
276
277
278
279
280
281
282
# 'mau_limit_alerting' is a means of limiting client side alerting
# should the mau limit be reached. This is useful for small instances
# where the admin has 5 mau seats (say) for 5 specific people and no
# interest increasing the mau limit further. Defaults to True, which
# means that alerting is enabled
#
#limit_usage_by_mau: false
283
284
#max_mau_value: 50
#mau_trial_days: 2
285
#mau_limit_alerting: false
286

287
288
289
290
# If enabled, the metrics for the number of monthly active users will
# be populated, however no one will be limited. If limit_usage_by_mau
# is true, this is implied to be true.
#
291
#mau_stats_only: false
292

293
294
295
# Sometimes the server admin will want to ensure certain accounts are
# never blocked by mau checking. These accounts are specified here.
#
296
297
298
#mau_limit_reserved_threepids:
#  - medium: 'email'
#    address: 'reserved_user@example.com'
299

300
301
302
# Used by phonehome stats to group together related servers.
#server_context: context

303
# Resource-constrained homeserver settings
304
#
305
306
307
# When this is enabled, the room "complexity" will be checked before a user
# joins a new remote room. If it is above the complexity limit, the server will
# disallow joining, or will instantly leave.
308
#
309
310
# Room complexity is an arbitrary measure based on factors such as the number of
# users in the room.
311
#
312
313
314
315
316
317
318
319
320
321
322
323
limit_remote_rooms:
  # Uncomment to enable room complexity checking.
  #
  #enabled: true

  # the limit above which rooms cannot be joined. The default is 1.0.
  #
  #complexity: 0.5

  # override the error which is returned when the room is too complex.
  #
  #complexity_error: "This room is too complex."
324

325
326
327
328
  # allow server admins to join complex rooms. Default is false.
  #
  #admins_can_join: true

329
330
331
332
333
# Whether to require a user to be in the room to add an alias to it.
# Defaults to 'true'.
#
#require_membership_for_aliases: false

334
335
336
337
338
339
# Whether to allow per-room membership profiles through the send of membership
# events with profile information that differ from the target's global profile.
# Defaults to 'true'.
#
#allow_per_room_profiles: false

340
341
342
343
344
345
346
347
348
349
350
351
352
# How long to keep redacted events in unredacted form in the database. After
# this period redacted events get replaced with their redacted form in the DB.
#
# Defaults to `7d`. Set to `null` to disable.
#
#redaction_retention_period: 28d

# How long to track users' last seen time and IPs in the database.
#
# Defaults to `28d`. Set to `null` to disable clearing out of old rows.
#
#user_ips_max_age: 14d

353
354
355
356
357
358
359
360
361
362
363
364
365
366
367
# Message retention policy at the server level.
#
# Room admins and mods can define a retention period for their rooms using the
# 'm.room.retention' state event, and server admins can cap this period by setting
# the 'allowed_lifetime_min' and 'allowed_lifetime_max' config options.
#
# If this feature is enabled, Synapse will regularly look for and purge events
# which are older than the room's maximum retention period. Synapse will also
# filter events received over federation so that events that should have been
# purged are ignored and not stored again.
#
retention:
  # The message retention policies feature is disabled by default. Uncomment the
  # following line to enable it.
  #
368
  enabled: true
369
370
371
372
373

  # Default retention policy. If set, Synapse will apply it to rooms that lack the
  # 'm.room.retention' state event. Currently, the value of 'min_lifetime' doesn't
  # matter much because Synapse doesn't take it into account yet.
  #
374
375
376
  default_policy:
    min_lifetime: 1d
    max_lifetime: 1y
377
378
379
380
381
382
383

  # Retention policy limits. If set, a user won't be able to send a
  # 'm.room.retention' event which features a 'min_lifetime' or a 'max_lifetime'
  # that's not within this range. This is especially useful in closed federations,
  # in which server admins can make sure every federating server applies the same
  # rules.
  #
384
385
  allowed_lifetime_min: 1d
  allowed_lifetime_max: 1y
386
387
388
389
390
391
392
393
394
395
396
397
398
399
400
401
402
403

  # Server admins can define the settings of the background jobs purging the
  # events which lifetime has expired under the 'purge_jobs' section.
  #
  # If no configuration is provided, a single job will be set up to delete expired
  # events in every room daily.
  #
  # Each job's configuration defines which range of message lifetimes the job
  # takes care of. For example, if 'shortest_max_lifetime' is '2d' and
  # 'longest_max_lifetime' is '3d', the job will handle purging expired events in
  # rooms whose state defines a 'max_lifetime' that's both higher than 2 days, and
  # lower than or equal to 3 days. Both the minimum and the maximum value of a
  # range are optional, e.g. a job with no 'shortest_max_lifetime' and a
  # 'longest_max_lifetime' of '3d' will handle every room with a retention policy
  # which 'max_lifetime' is lower than or equal to three days.
  #
  # The rationale for this per-job configuration is that some rooms might have a
  # retention policy with a low 'max_lifetime', where history needs to be purged
404
405
406
  # of outdated messages on a more frequent basis than for the rest of the rooms
  # (e.g. every 12h), but not want that purge to be performed by a job that's
  # iterating over every room it knows, which could be heavy on the server.
407
  #
408
409
410
  purge_jobs:
    - shortest_max_lifetime: 1d
      longest_max_lifetime: 3d
411
      interval: 12h
412
413
    - shortest_max_lifetime: 3d
      longest_max_lifetime: 1y
414
      interval: 1d
415

416
417
418
419
420
421
422
423
424
425
# Inhibits the /requestToken endpoints from returning an error that might leak
# information about whether an e-mail address is in use or not on this
# homeserver.
# Note that for some endpoints the error situation is the e-mail already being
# used, and for others the error is entering the e-mail being unused.
# If this option is enabled, instead of returning an error, these endpoints will
# act as if no error happened and return a fake session ID ('sid') to clients.
#
#request_token_inhibit_3pid_errors: true

426

427
428
429
430
431
432
433
434
435
## TLS ##

# PEM-encoded X509 certificate for TLS.
# This certificate, as of Synapse 1.0, will need to be a valid and verifiable
# certificate, signed by a recognised Certificate Authority.
#
# See 'ACME support' below to enable auto-provisioning this certificate via
# Let's Encrypt.
#
436
437
438
439
440
# If supplying your own, be sure to use a `.pem` file that includes the
# full certificate chain including any intermediate certificates (for
# instance, if using certbot, use `fullchain.pem` as your certificate,
# not `cert.pem`).
#
441
#tls_certificate_path: "CONFDIR/SERVERNAME.tls.crt"
442
443

# PEM-encoded private key for TLS
444
#
445
#tls_private_key_path: "CONFDIR/SERVERNAME.tls.key"
446

447
# Whether to verify TLS server certificates for outbound federation requests.
448
#
449
450
# Defaults to `true`. To disable certificate verification, uncomment the
# following line.
451
#
452
#federation_verify_certificates: false
453

454
455
456
457
458
459
460
461
462
# The minimum TLS version that will be used for outbound federation requests.
#
# Defaults to `1`. Configurable to `1`, `1.1`, `1.2`, or `1.3`. Note
# that setting this value higher than `1.2` will prevent federation to most
# of the public Matrix network: only configure it to `1.3` if you have an
# entirely private federation setup and you can ensure TLS 1.3 support.
#
#federation_client_minimum_tls_version: 1.2

463
464
465
466
467
468
469
470
471
472
473
474
475
476
477
478
479
480
481
482
483
484
485
486
487
488
489
# Skip federation certificate verification on the following whitelist
# of domains.
#
# This setting should only be used in very specific cases, such as
# federation over Tor hidden services and similar. For private networks
# of homeservers, you likely want to use a private CA instead.
#
# Only effective if federation_verify_certicates is `true`.
#
#federation_certificate_verification_whitelist:
#  - lon.example.com
#  - *.domain.com
#  - *.onion

# List of custom certificate authorities for federation traffic.
#
# This setting should only normally be used within a private network of
# homeservers.
#
# Note that this list will replace those that are provided by your
# operating environment. Certificates must be in PEM format.
#
#federation_custom_ca_list:
#  - myCA1.pem
#  - myCA2.pem
#  - myCA3.pem

490
491
492
# ACME support: This will configure Synapse to request a valid TLS certificate
# for your configured `server_name` via Let's Encrypt.
#
493
494
495
496
497
# Note that ACME v1 is now deprecated, and Synapse currently doesn't support
# ACME v2. This means that this feature currently won't work with installs set
# up after November 2019. For more info, and alternative solutions, see
# https://github.com/matrix-org/synapse/blob/master/docs/ACME.md#deprecation-of-acme-v1
#
498
499
500
501
502
503
504
505
506
507
508
509
510
511
512
513
514
515
516
# Note that provisioning a certificate in this way requires port 80 to be
# routed to Synapse so that it can complete the http-01 ACME challenge.
# By default, if you enable ACME support, Synapse will attempt to listen on
# port 80 for incoming http-01 challenges - however, this will likely fail
# with 'Permission denied' or a similar error.
#
# There are a couple of potential solutions to this:
#
#  * If you already have an Apache, Nginx, or similar listening on port 80,
#    you can configure Synapse to use an alternate port, and have your web
#    server forward the requests. For example, assuming you set 'port: 8009'
#    below, on Apache, you would write:
#
#    ProxyPass /.well-known/acme-challenge http://localhost:8009/.well-known/acme-challenge
#
#  * Alternatively, you can use something like `authbind` to give Synapse
#    permission to listen on port 80.
#
acme:
517
518
    # ACME support is disabled by default. Set this to `true` and uncomment
    # tls_certificate_path and tls_private_key_path above to enable it.
519
    #
520
    enabled: false
521
522
523
524
525

    # Endpoint to use to request certificates. If you only want to test,
    # use Let's Encrypt's staging url:
    #     https://acme-staging.api.letsencrypt.org/directory
    #
526
    #url: https://acme-v01.api.letsencrypt.org/directory
527
528
529
530

    # Port number to listen on for the HTTP-01 challenge. Change this if
    # you are forwarding connections through Apache/Nginx/etc.
    #
531
    port: 80
532
533
534
535
536

    # Local addresses to listen on for incoming connections.
    # Again, you may want to change this if you are forwarding connections
    # through Apache/Nginx/etc.
    #
537
    bind_addresses: ['::', '0.0.0.0']
538
539
540

    # How many days remaining on a certificate before it is renewed.
    #
541
    reprovision_threshold: 30
542
543
544
545
546
547
548
549
550
551
552
553
554

    # The domain that the certificate should be for. Normally this
    # should be the same as your Matrix domain (i.e., 'server_name'), but,
    # by putting a file at 'https://<server_name>/.well-known/matrix/server',
    # you can delegate incoming traffic to another server. If you do that,
    # you should give the target of the delegation here.
    #
    # For example: if your 'server_name' is 'example.com', but
    # 'https://example.com/.well-known/matrix/server' delegates to
    # 'matrix.example.com', you should put 'matrix.example.com' here.
    #
    # If not set, defaults to your 'server_name'.
    #
555
    domain: {{ matrix_domain }}
556
557
558
559
560
561
562

    # file to use for the account key. This will be generated if it doesn't
    # exist.
    #
    # If unspecified, we will use CONFDIR/client.key.
    #
    account_key_file: DATADIR/acme_account.key
563
564
565
566
567
568
569
570
571
572
573
574
575
576
577
578
579
580
581
582
583
584
585
586
587
588

# List of allowed TLS fingerprints for this server to publish along
# with the signing keys for this server. Other matrix servers that
# make HTTPS requests to this server will check that the TLS
# certificates returned by this server match one of the fingerprints.
#
# Synapse automatically adds the fingerprint of its own certificate
# to the list. So if federation traffic is handled directly by synapse
# then no modification to the list is required.
#
# If synapse is run behind a load balancer that handles the TLS then it
# will be necessary to add the fingerprints of the certificates used by
# the loadbalancers to this list if they are different to the one
# synapse is using.
#
# Homeservers are permitted to cache the list of TLS fingerprints
# returned in the key responses up to the "valid_until_ts" returned in
# key. It may be necessary to publish the fingerprints of a new
# certificate and wait until the "valid_until_ts" of the previous key
# responses have passed before deploying it.
#
# You can calculate a fingerprint from a given TLS listener via:
# openssl s_client -connect $host:$port < /dev/null 2> /dev/null |
#   openssl x509 -outform DER | openssl sha256 -binary | base64 | tr -d '='
# or by checking matrix.org/federationtester/api/report?server_name=$host
#
589
#tls_fingerprints: [{"sha256": "<base64_encoded_sha256_fingerprint>"}]
590
591
592



593
594
595
596
597
598
599
600
601
602
603
604
605
606
607
608
609
610
611
612
613
614
615
616
617
618
619
620
621
622
623
624
625
# Restrict federation to the following whitelist of domains.
# N.B. we recommend also firewalling your federation listener to limit
# inbound federation traffic as early as possible, rather than relying
# purely on this application-layer restriction.  If not specified, the
# default is to whitelist everything.
#
#federation_domain_whitelist:
#  - lon.example.com
#  - nyc.example.com
#  - syd.example.com

# Prevent federation requests from being sent to the following
# blacklist IP address CIDR ranges. If this option is not specified, or
# specified with an empty list, no ip range blacklist will be enforced.
#
# As of Synapse v1.4.0 this option also affects any outbound requests to identity
# servers provided by user input.
#
# (0.0.0.0 and :: are always blacklisted, whether or not they are explicitly
# listed here, since they correspond to unroutable addresses.)
#
federation_ip_range_blacklist:
  - '127.0.0.0/8'
  - '10.0.0.0/8'
  - '172.16.0.0/12'
  - '192.168.0.0/16'
  - '100.64.0.0/10'
  - '169.254.0.0/16'
  - '::1/128'
  - 'fe80::/64'
  - 'fc00::/7'


626
627
628
629
630
631
632
633
634
635
636
637
638
639
640
641
642
643
644
645
646
647
648
649
650
651
652
653
654
655
656
657
658
659
660
661
662
663
664
665
666
667
668
669
670
## Caching ##

# Caching can be configured through the following options.
#
# A cache 'factor' is a multiplier that can be applied to each of
# Synapse's caches in order to increase or decrease the maximum
# number of entries that can be stored.

# The number of events to cache in memory. Not affected by
# caches.global_factor.
#
#event_cache_size: 10K

caches:
   # Controls the global cache factor, which is the default cache factor
   # for all caches if a specific factor for that cache is not otherwise
   # set.
   #
   # This can also be set by the "SYNAPSE_CACHE_FACTOR" environment
   # variable. Setting by environment variable takes priority over
   # setting through the config file.
   #
   # Defaults to 0.5, which will half the size of all caches.
   #
   global_factor: 1.0

   # A dictionary of cache name to cache factor for that individual
   # cache. Overrides the global cache factor for a given cache.
   #
   # These can also be set through environment variables comprised
   # of "SYNAPSE_CACHE_FACTOR_" + the name of the cache in capital
   # letters and underscores. Setting by environment variable
   # takes priority over setting through the config file.
   # Ex. SYNAPSE_CACHE_FACTOR_GET_USERS_WHO_SHARE_ROOM_WITH_USER=2.0
   #
   # Some caches have '*' and other characters that are not
   # alphanumeric or underscores. These caches can be named with or
   # without the special characters stripped. For example, to specify
   # the cache factor for `*stateGroupCache*` via an environment
   # variable would be `SYNAPSE_CACHE_FACTOR_STATEGROUPCACHE=2.0`.
   #
   per_cache_factors:
     #get_users_who_share_room_with_user: 2.0


671
672
## Database ##

673
674
675
676
677
678
679
680
681
682
683
684
685
686
687
688
689
690
691
692
693
694
695
696
697
698
699
# The 'database' setting defines the database that synapse uses to store all of
# its data.
#
# 'name' gives the database engine to use: either 'sqlite3' (for SQLite) or
# 'psycopg2' (for PostgreSQL).
#
# 'args' gives options which are passed through to the database engine,
# except for options starting 'cp_', which are used to configure the Twisted
# connection pool. For a reference to valid arguments, see:
#   * for sqlite: https://docs.python.org/3/library/sqlite3.html#sqlite3.connect
#   * for postgres: https://www.postgresql.org/docs/current/libpq-connect.html#LIBPQ-PARAMKEYWORDS
#   * for the connection pool: https://twistedmatrix.com/documents/current/api/twisted.enterprise.adbapi.ConnectionPool.html#__init__
#
#
# Example SQLite configuration:
#
#database:
#  name: sqlite3
#  args:
#    database: /path/to/homeserver.db
#
#
# Example Postgres configuration:
#
#database:
#  name: psycopg2
#  args:
700
#    user: synapse_user
701
702
703
704
705
706
707
708
#    password: secretpassword
#    database: synapse
#    host: localhost
#    cp_min: 5
#    cp_max: 10
#
# For more information on using Synapse with Postgres, see `docs/postgres.md`.
#
709
database:
710
  name: psycopg2
711
712
713
  args:
    dbname: synapse
    user: synapse
714
    password: {{ vault_postgres_users.synapse }}
715
716
717
718
    cp_min: 5
    cp_max: 10


719
## Logging ##
720

721
722
# A yaml python logging config file as described by
# https://docs.python.org/3.7/library/logging.config.html#configuration-dictionary-schema
723
#
724
log_config: "/etc/synapse/log_config.yaml"
725
worker_log_config: "/etc/synapse/log_config.yaml"
726
727
728
729


## Ratelimiting ##

730
# Ratelimiting settings for client actions (registration, login, messaging).
731
732
733
734
735
736
#
# Each ratelimiting configuration is made of two parameters:
#   - per_second: number of requests a client can send per second.
#   - burst_count: number of requests a client can send before being throttled.
#
# Synapse currently uses the following configurations:
737
738
#   - one for messages that ratelimits sending based on the account the client
#     is using
739
740
741
742
743
744
745
746
747
#   - one for registration that ratelimits registration requests based on the
#     client's IP address.
#   - one for login that ratelimits login requests based on the client's IP
#     address.
#   - one for login that ratelimits login requests based on the account the
#     client is attempting to log into.
#   - one for login that ratelimits login requests based on the account the
#     client is attempting to log into, based on the amount of failed login
#     attempts for this account.
748
749
750
#   - one for ratelimiting redactions by room admins. If this is not explicitly
#     set then it uses the same ratelimiting as per rc_message. This is useful
#     to allow room admins to deal with abuse quickly.
751
752
753
754
#   - two for ratelimiting number of rooms a user can join, "local" for when
#     users are joining rooms the server is already in (this is cheap) vs
#     "remote" for when users are trying to join rooms not on the server (which
#     can be more expensive)
755
756
757
#
# The defaults are as shown below.
#
758
759
760
761
#rc_message:
#  per_second: 0.2
#  burst_count: 10
#
762
763
764
765
766
767
768
769
770
771
772
773
774
775
#rc_registration:
#  per_second: 0.17
#  burst_count: 3
#
#rc_login:
#  address:
#    per_second: 0.17
#    burst_count: 3
#  account:
#    per_second: 0.17
#    burst_count: 3
#  failed_attempts:
#    per_second: 0.17
#    burst_count: 3
776
777
778
779
#
#rc_admin_redaction:
#  per_second: 1
#  burst_count: 50
780
781
782
783
784
785
786
787
#
#rc_joins:
#  local:
#    per_second: 0.1
#    burst_count: 3
#  remote:
#    per_second: 0.01
#    burst_count: 3
788
789


790
# Ratelimiting settings for incoming federation
791
#
792
793
794
795
796
797
798
799
800
801
# The rc_federation configuration is made up of the following settings:
#   - window_size: window size in milliseconds
#   - sleep_limit: number of federation requests from a single server in
#     a window before the server will delay processing the request.
#   - sleep_delay: duration in milliseconds to delay processing events
#     from remote servers by if they go over the sleep limit.
#   - reject_limit: maximum number of concurrent federation requests
#     allowed from a single server
#   - concurrent: number of federation requests to concurrently process
#     from a single server
802
#
803
# The defaults are as shown below.
804
#
805
806
807
808
809
810
#rc_federation:
#  window_size: 1000
#  sleep_limit: 10
#  sleep_delay: 500
#  reject_limit: 50
#  concurrent: 3
811
812
813
814
815
816
817
818

# Target outgoing federation transaction frequency for sending read-receipts,
# per-room.
#
# If we end up trying to send out more read-receipts, they will get buffered up
# into fewer transactions.
#
#federation_rr_transactions_per_room_per_second: 50
819
820
821



822
823
824
825
826
## Media Store ##

# Enable the media store service in the Synapse master. Uncomment the
# following if you are using a separate media store worker.
#
827
enable_media_repo: false
828

829
# Directory where uploaded images and attachments are stored.
830
#
831
832
833
834
media_store_path: "/var/lib/synapse/media_store"

# Media storage providers allow media to be stored in different
# locations.
835
836
837
#
#media_storage_providers:
#  - module: file_system
838
#    # Whether to store newly uploaded local files
839
#    store_local: false
840
#    # Whether to store newly downloaded remote files
841
#    store_remote: false
842
#    # Whether to wait for successful storage for local uploads
843
844
845
#    store_synchronous: false
#    config:
#       directory: /mnt/some/other/directory
846
847

# The largest allowed upload size in bytes
848
#
849
max_upload_size: 30M
850
851

# Maximum number of pixels that will be thumbnailed
852
853
#
#max_image_pixels: 32M
854
855
856
857
858
859

# Whether to generate new thumbnails on the fly to precisely match
# the resolution requested by the client. If true then whenever
# a new resolution is requested by the client the server will
# generate a new thumbnail. If false the server will pick a thumbnail
# from a precalculated list.
860
861
862
863
864
865
866
867
868
869
870
871
872
873
874
875
876
877
878
879
880
881
882
883
884
885
886
887
#
#dynamic_thumbnails: false

# List of thumbnails to precalculate when an image is uploaded.
#
#thumbnail_sizes:
#  - width: 32
#    height: 32
#    method: crop
#  - width: 96
#    height: 96
#    method: crop
#  - width: 320
#    height: 240
#    method: scale
#  - width: 640
#    height: 480
#    method: scale
#  - width: 800
#    height: 600
#    method: scale

# Is the preview URL API enabled?
#
# 'false' by default: uncomment the following to enable it (and specify a
# url_preview_ip_range_blacklist blacklist).
#
url_preview_enabled: true
888
889
890
891
892
893
894
895
896

# List of IP address CIDR ranges that the URL preview spider is denied
# from accessing.  There are no defaults: you must explicitly
# specify a list for URL previewing to work.  You should specify any
# internal services in your network that you do not want synapse to try
# to connect to, otherwise anyone in any Matrix room could cause your
# synapse to issue arbitrary GET requests to your internal services,
# causing serious security issues.
#
897
898
899
# (0.0.0.0 and :: are always blacklisted, whether or not they are explicitly
# listed here, since they correspond to unroutable addresses.)
#
900
# This must be specified if url_preview_enabled is set. It is recommended that
901
# you uncomment the following list as a starting point.
902
#
903
904
905
906
907
908
909
910
911
912
913
url_preview_ip_range_blacklist:
  - '127.0.0.0/8'
  - '10.0.0.0/8'
  - '172.16.0.0/12'
  - '192.168.0.0/16'
  - '100.64.0.0/10'
  - '169.254.0.0/16'
  - '::1/128'
  - 'fe80::/64'
  - 'fc00::/7'

914
915
916
917
918
919
# List of IP address CIDR ranges that the URL preview spider is allowed
# to access even if they are specified in url_preview_ip_range_blacklist.
# This is useful for specifying exceptions to wide-ranging blacklisted
# target IP ranges - e.g. for enabling URL previews for a specific private
# website only visible in your network.
#
920
921
#url_preview_ip_range_whitelist:
#   - '192.168.1.1'
922
923
924
925
926
927
928
929
930
931
932
933
934
935
936
937
938

# Optional list of URL matches that the URL preview spider is
# denied from accessing.  You should use url_preview_ip_range_blacklist
# in preference to this, otherwise someone could define a public DNS
# entry that points to a private IP address and circumvent the blacklist.
# This is more useful if you know there is an entire shape of URL that
# you know that will never want synapse to try to spider.
#
# Each list entry is a dictionary of url component attributes as returned
# by urlparse.urlsplit as applied to the absolute form of the URL.  See
# https://docs.python.org/2/library/urlparse.html#urlparse.urlsplit
# The values of the dictionary are treated as an filename match pattern
# applied to that component of URLs, unless they start with a ^ in which
# case they are treated as a regular expression match.  If all the
# specified component matches for a given list item succeed, the URL is
# blacklisted.
#
939
940
941
#url_preview_url_blacklist:
#  # blacklist any URL with a username in its URI
#  - username: '*'
942
#
943
944
945
#  # blacklist all *.google.com URLs
#  - netloc: 'google.com'
#  - netloc: '*.google.com'
946
#
947
948
#  # blacklist all plain HTTP URLs
#  - scheme: 'http'
949
#
950
951
952
#  # blacklist http(s)://www.acme.com/foo
#  - netloc: 'www.acme.com'
#    path: '/foo'
953
#
954
955
#  # blacklist any URL with a literal IPv4 address
#  - netloc: '^[0-9]+\.[0-9]+\.[0-9]+\.[0-9]+$'
956
957

# The largest allowed URL preview spidering size in bytes
958
959
#
#max_spider_size: 10M
960

961
962
963
964
965
966
967
968
969
970
971
972
973
974
975
976
977
978
979
980
981
982
983
984
985
# A list of values for the Accept-Language HTTP header used when
# downloading webpages during URL preview generation. This allows
# Synapse to specify the preferred languages that URL previews should
# be in when communicating with remote servers.
#
# Each value is a IETF language tag; a 2-3 letter identifier for a
# language, optionally followed by subtags separated by '-', specifying
# a country or region variant.
#
# Multiple values can be provided, and a weight can be added to each by
# using quality value syntax (;q=). '*' translates to any language.
#
# Defaults to "en".
#
# Example:
#
# url_preview_accept_language:
#   - en-UK
#   - en-US;q=0.9
#   - fr;q=0.8
#   - *;q=0.7
#
url_preview_accept_language:
#   - en

986
987

## Captcha ##
988
# See docs/CAPTCHA_SETUP.md for full details of configuring this.
989

990
991
# This homeserver's ReCAPTCHA public key. Must be specified if
# enable_registration_captcha is enabled.
992
993
#
#recaptcha_public_key: "YOUR_PUBLIC_KEY"
994

995
996
# This homeserver's ReCAPTCHA private key. Must be specified if
# enable_registration_captcha is enabled.
997
998
#
#recaptcha_private_key: "YOUR_PRIVATE_KEY"
999

1000
# Uncomment to enable ReCaptcha checks when registering, preventing signup