This patch allow rc.d list started and rc.d list stopped which list respectively
only started and stopped daemons

Signed-off-by: Sebastien Luttringer <seblu@seblu.net>

Signed-off-by: Sebastien Luttringer <seblu@seblu.net>

This is some unfinished business from our removal of load-modules.sh.
We call modprobe with -ab for the contents of the MODULES array, which
should no longer contain ! prefixed module names. --quiet is explicitly
ommitted, as users should be aware of any errors that might occur here.

Signed-off-by: Dave Reisner <d@falconindy.com>
Signed-off-by: Tom Gundersen <teg@jklm.no>

Without this broadcast address is not set.

broadcast= parameter can be empty. In this case the broadcast address
is derived by setting all of the interface host bits to one (+).

Signed-off-by: Gerardo Exequiel Pozzi <vmlinuz386@yahoo.com.ar>

This allows us to ignore the hostname utility, whose home is currently in flux.

Suggested-by: Thomas Bächler <thomas@archlinux.org>
Signed-off-by: Tom Gundersen <teg@jklm.no>

Conflicts:
	rc.multi
	rc.single

Trivial conflict, and fixed a bug introduced when I imported the patches in the first place (oops).

Signed-off-by: Tom Gundersen <teg@jklm.no>

Signed-off-by: Eric Bélanger <snowmaniscool@gmail.com>
Signed-off-by: Tom Gundersen <teg@jklm.no>

Signed-off-by: Eric Bélanger <snowmaniscool@gmail.com>
Signed-off-by: Tom Gundersen <teg@jklm.no>

Signed-off-by: Eric Bélanger <snowmaniscool@gmail.com>
Signed-off-by: Tom Gundersen <teg@jklm.no>

Conflicts:
	rc.single
	rc.sysinit

Mostly trivial conflicts with Dave's path purging

Signed-off-by: Tom Gundersen <teg@jklm.no>

This has been removed from the udev package, so this code would never
be executed. Can finally be removed.

Signed-off-by: Tom Gundersen <teg@jklm.no>

Before: adjust and set time on boot, adjust rtc every hour, and on shutdown.
Now: do not set time on boot, adjust rtc on shutdown.

Rationale:

1) We can never ever set the systemtime after system is up and running, as this might
   make time go backwards (unless we are careful à la ntpd, but we don't want to get
   into that business).

2) We are under the assumption that exact time is not needed, we are just trying
   to avoid large, accumulating drifts over time. With the new (significantly simpler)
   implementation systemtime will be off by the drift since the last clean shutdown.
   With the old implementation systemtime would be off by the drift since last
   shutdown (even if it was unclean). Either way the drifts would not accumulate,
   and a clean reboot would get you a "perfect" time.

Signed-off-by: Tom Gundersen <teg@jklm.no>

This allows HARDWARECLOCK to be removed from rc.conf, if you want to
rely on /var/lib/hwclock/adjtime (or wherever the file ends up in the
future). It assumes the relevant path is on the rootfs.

Furthermore, we can assume (since kernel2.6.??) that the rtc modules
set the time from rtc themselves, so our job is just to adjust the tz.
(FWIW, this coincides with what systemd does).

To get the old behavior of not touching the rtc, set it to anything
anything else.

We should probably have chosen a syntax for this, like IGNORE. Maybe
another time...

Signed-off-by: Tom Gundersen <teg@jklm.no>

Signed-off-by: Gerardo Exequiel Pozzi <vmlinuz386@yahoo.com.ar>

Signed-off-by: Gerardo Exequiel Pozzi <vmlinuz386@yahoo.com.ar>

If settle finishes too early, we want to know as some needed devices might not
yet have been enumerated. Do not pass --quiet.

Do not check for running udev before doing trigger/settle. Worst case, if someone
does not have udev (which is not supported), they will see some extra status lines,
but boot will still continue.

Lastly, remove obvious comments (they were repeating the status message in the line
below).

Signed-off-by: Tom Gundersen <teg@jklm.no>

These are run from a context where PATH will be set, so defining
absolute paths is unnecessary.

Since we're declaring a PATH anyways, we may as well use it. This gives
us immunity against binaries moving around, as in the recent case of
iproute2. A few other minor, associated, tweaks to go along with this:

* any -x tests are modified to use 'type -P' to resolve the path before
  checking for execute permission
* any pidof checks are stripped of paths as well.

Going from multi to single and going back to multi, bootlogd is not running.

Signed-off-by: Gerardo Exequiel Pozzi <vmlinuz386@yahoo.com.ar>

Conflicts:
	rc.sysinit

Conflict with ip move away from /usr

The move to iproute2 broke the setup of loopback for users having
a separate /usr, as it was not monuted before /usr/bin/ip was called.

Together with iprouet2-2.6.38-3, this fixes the problem by using
/sbin/ip instead.

Signed-off-by: Tom Gundersen <teg@jklm.no>

Signed-off-by: Dave Reisner <d@falconindy.com>

Signed-off-by: Dave Reisner <d@falconindy.com>

We already have /tmp and /dev/shm as world writeable directories with
exec permissions, so it doesn't necessarily make sense to inhibit exec
here. There also might be use cases where running one-off programs from
/run might make sense.

Signed-off-by: Dave Reisner <d@falconindy.com>

Upstream already supports this via the loglevel= parameter on the kernel
cmdline, so we should support using this instead of our own homegrown
solution.

Signed-off-by: Dave Reisner <d@falconindy.com>

This will no longer have any effect with the new udev package.

Signed-off-by: Tom Gundersen <teg@jklm.no>

This is as part of deprecating net-tools. nisdoaminname has been moved to
yp-tools, and the location of the config file has changed. When using ypbind
the doaminname is set as part of the rc script. If needed for other purposes
a new rc script should be added.

Signed-off-by: Tom Gundersen <teg@jklm.no>

Commit a3314c76

 deleted a bit too much of the comments from rc.conf.

This patch restores the comments/example used by netcfg, and clarifies
the comments a bit.

Signed-off-by: Tom Gundersen <teg@jklm.no>

Commit d8796827

 introduced a minor bug, this fixes it.

We alse add some indentation to avoid future confusion.

Signed-off-by: Tom Gundersen <teg@jklm.no>

To quote the commit to util-linux:

"Reuse the speed the kernel configured on the port. If the setting
 from kernel is useless (tty returns BREAK character) then the specified
 baud rate (38400) is used."

Signed-off-by: Tom Gundersen <teg@jklm.no>

Conflicts:
	rc.d

Trivial conflict with dave's eval purge.

Signed-off-by: Tom Gundersen <teg@jklm.no>

Signed-off-by: Eric Bélanger <snowmaniscool@gmail.com>
Signed-off-by: Tom Gundersen <teg@jklm.no>

Signed-off-by: Tom Gundersen <teg@jklm.no>

Add comment to note that MOD_AUTOLOAD should always be "yes" and
blacklisting is no longer supported in the MODULES array.

Signed-off-by: Tom Gundersen <teg@jklm.no>

This reverts commit 99d64f57

.

We decided not to provide a compatibility layer, but rather require
the user to create blacklist files in /etc/modprobe.d manually.
Hence, this is no longer needed.

The reason was that the compatibliy would not be 1-to-1, so it might
be missleading to pretend that it was. Also, most people should not
need the blacklisting in the first place.

Conflicts:

	Makefile

Signed-off-by: Tom Gundersen <teg@jklm.no>

Signed-off-by: Sebastien Luttringer <seblu@seblu.net>

Signed-off-by: Sebastien Luttringer <seblu@seblu.net>

Dave Reisner authored May 27, 2011 and Sébastien Luttringer committed May 31, 2011

Signed-off-by: Dave Reisner <d@falconindy.com>
Signed-off-by: Sebastien Luttringer <seblu@seblu.net>