Commit 20d32022 authored by Takashi Iwai's avatar Takashi Iwai
Browse files

ALSA: usb-audio: Deprecate async_unlink option



The async unlink behavior has been working over years.  The option was
provided only as a workaround for 2.4.x kernel.  Let's get rid of it.

Signed-off-by: default avatarTakashi Iwai <tiwai@suse.de>
parent 8ad10dc6
......@@ -1905,7 +1905,6 @@ Prior to version 0.9.0rc4 options had a 'snd_' prefix. This was removed.
vid - Vendor ID for the device (optional)
pid - Product ID for the device (optional)
nrpacks - Max. number of packets per URB (default: 8)
async_unlink - Use async unlink mode (default: yes)
device_setup - Device specific magic number (optional)
- Influence depends on the device
- Default: 0x0000
......@@ -1917,8 +1916,6 @@ Prior to version 0.9.0rc4 options had a 'snd_' prefix. This was removed.
NB: nrpacks parameter can be modified dynamically via sysfs.
Don't put the value over 20. Changing via sysfs has no sanity
check.
NB: async_unlink=0 would cause Oops. It remains just for
debugging purpose (if any).
NB: ignore_ctl_error=1 may help when you get an error at accessing
the mixer element such as URB error -22. This happens on some
buggy USB device or the controller.
......
......@@ -25,9 +25,6 @@
*
* NOTES:
*
* - async unlink should be used for avoiding the sleep inside lock.
* 2.4.22 usb-uhci seems buggy for async unlinking and results in
* oops. in such a cse, pass async_unlink=0 option.
* - the linked URBs would be preferred but not used so far because of
* the instability of unlinking.
* - type II is not supported properly. there is no device which supports
......@@ -83,7 +80,6 @@ static bool enable[SNDRV_CARDS] = SNDRV_DEFAULT_ENABLE_PNP;/* Enable this card *
static int vid[SNDRV_CARDS] = { [0 ... (SNDRV_CARDS-1)] = -1 };
static int pid[SNDRV_CARDS] = { [0 ... (SNDRV_CARDS-1)] = -1 };
static int nrpacks = 8; /* max. number of packets per urb */
static bool async_unlink = 1;
static int device_setup[SNDRV_CARDS]; /* device parameter for this card */
static bool ignore_ctl_error;
......@@ -99,8 +95,6 @@ module_param_array(pid, int, NULL, 0444);
MODULE_PARM_DESC(pid, "Product ID for the USB audio device.");
module_param(nrpacks, int, 0644);
MODULE_PARM_DESC(nrpacks, "Max. number of packets per URB.");
module_param(async_unlink, bool, 0444);
MODULE_PARM_DESC(async_unlink, "Use async unlink mode.");
module_param_array(device_setup, int, NULL, 0444);
MODULE_PARM_DESC(device_setup, "Specific device setup (if needed).");
module_param(ignore_ctl_error, bool, 0444);
......@@ -345,7 +339,6 @@ static int snd_usb_audio_create(struct usb_device *dev, int idx,
chip->card = card;
chip->setup = device_setup[idx];
chip->nrpacks = nrpacks;
chip->async_unlink = async_unlink;
chip->probing = 1;
chip->usb_id = USB_ID(le16_to_cpu(dev->descriptor.idVendor),
......
......@@ -523,7 +523,7 @@ static int deactivate_urbs(struct snd_usb_endpoint *ep, int force, int can_sleep
if (!force && ep->chip->shutdown) /* to be sure... */
return -EBADFD;
async = !can_sleep && ep->chip->async_unlink;
async = !can_sleep;
clear_bit(EP_FLAG_RUNNING, &ep->flags);
......
......@@ -56,7 +56,6 @@ struct snd_usb_audio {
int setup; /* from the 'device_setup' module param */
int nrpacks; /* from the 'nrpacks' module param */
int async_unlink; /* from the 'async_unlink' module param */
struct usb_host_interface *ctrl_intf; /* the audio control interface */
};
......
Supports Markdown
0% or .
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment