This project is mirrored from https://git.kernel.org/pub/scm/linux/kernel/git/rt/linux-rt-devel.git. Pull mirroring updated .
  1. 10 Aug, 2017 1 commit
  2. 31 Jan, 2017 1 commit
  3. 29 Apr, 2015 1 commit
  4. 18 Aug, 2014 1 commit
  5. 16 Apr, 2014 1 commit
  6. 15 Nov, 2011 1 commit
    • wangyanqing's avatar
      USB: serial: pl2303: rm duplicate id · 0c165955
      wangyanqing authored
      I get report from customer that his usb-serial
      converter doesn't work well,it sometimes work,
      but sometimes it doesn't.
      
      The usb-serial converter's id:
      vendor_id product_id
      0x4348    0x5523
      
      Then I search the usb-serial codes, and there are
      two drivers announce support this device, pl2303
      and ch341, commit 026dfaf1 cause it. Through many
      times to test, ch341 works well with this device,
      and pl2303 doesn't work quite often(it just work quite little).
      
      ch341 works well with this device, so we doesn't
      need pl2303 to support.I try to revert 026dfaf1
      
       first,
      but it failed. So I prepare this patch by hand to revert it.
      
      Signed-off-by: default avatarWang YanQing <Udknight@gmail.com>
      Cc: stable <stable@vger.kernel.org>
      Signed-off-by: default avatarGreg Kroah-Hartman <gregkh@suse.de>
      0c165955
  7. 26 Sep, 2011 1 commit
  8. 19 Jul, 2011 1 commit
  9. 23 Jan, 2011 1 commit
  10. 24 Aug, 2010 1 commit
  11. 20 May, 2010 1 commit
  12. 30 Apr, 2010 1 commit
  13. 22 Apr, 2010 1 commit
  14. 23 Sep, 2009 1 commit
  15. 07 Aug, 2009 1 commit
    • Khanh-Dang Nguyen Thu Lam's avatar
      USB: pl2303: New vendor and product id · 49276560
      Khanh-Dang Nguyen Thu Lam authored
      
      
      I am submitting a patch for the pl2303 driver.  This patch adds support
      for the "Sony QN-3USB" cable (vendor=0x054c, product=0x0437).  This USB
      cable is a so-called data cable used to connect a Sony mobile phone to a
      computer.  Supported models are Sony CMD-J5, J6, J7, J16, J26, J70 and
      Z7.
      
      I have used this patch with my Sony CMD-J70 for several days and I
      haven't encountered any kernel/hardware issue.
      
      
      From: Khanh-Dang Nguyen Thu Lam <kdntl@yahoo.fr>
      Signed-off-by: default avatarGreg Kroah-Hartman <gregkh@suse.de>
      49276560
  16. 12 Jul, 2009 1 commit
    • Gianpaolo Cugola's avatar
      USB: pl2303: New vendor and product id for the prolific driver · 8540d666
      Gianpaolo Cugola authored
      
      
      I recently bought a PC interface for the Cressi Edy dive computer
      (www.cressi.it) and discovered that it uses the pl2303 chip, albeit
      with ad-hoc vendor and product ids (04b8, 0521 respectively). Being in
      the process of writing a linux software for such device (cressi only
      provides a windows software), I patched the pl2303 linux driver to
      have the interface recognized. I am submitting you the patch (very
      basic) for inclusion in next kernel version.
      
      From: Gianpaolo Cugola <gianpaoloc@gmail.com>
      Signed-off-by: default avatarGreg Kroah-Hartman <gregkh@suse.de>
      8540d666
  17. 06 Apr, 2009 1 commit
  18. 17 Dec, 2008 2 commits
  19. 14 Aug, 2008 1 commit
  20. 04 Jul, 2008 1 commit
  21. 29 May, 2008 1 commit
  22. 20 May, 2008 1 commit
  23. 25 Mar, 2008 1 commit
    • Max Arnold's avatar
      USB: pl2303: another product ID · b483b6aa
      Max Arnold authored
      Device like this http://aldiga.com/english/A-100-USB-EDGE10.htm
      
      
      contains Prolific 2303 chip.
      Actually their site a bit outdated - I have AlDiga AL-11U
      GSM/GPRS/EDGE modem and it works with pl2303 module after adding
      corresponding product ID.
      
      By default modem uses baud rate 460800.  GSM chipset - SIMCom SIM600,
      quad band 850/900/1800/1900 MHz
      
      Device info:
      
      T:  Bus=04 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#=  5 Spd=12  MxCh= 0
      D:  Ver= 1.10 Cls=00(>ifc ) Sub=00 Prot=00 MxPS= 8 #Cfgs=  1
      P:  Vendor=067b ProdID=0611 Rev= 0.00
      C:* #Ifs= 1 Cfg#= 1 Atr=a0 MxPwr=500mA
      I:* If#= 0 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=pl2303
      E:  Ad=81(I) Atr=03(Int.) MxPS=  10 Ivl=1ms
      E:  Ad=02(O) Atr=02(Bulk) MxPS=  64 Ivl=0ms
      E:  Ad=83(I) Atr=02(Bulk) MxPS=  64 Ivl=0ms
      
      From: Max Arnold <lwarxx@gmail.com>
      Signed-off-by: default avatarGreg Kroah-Hartman <gregkh@suse.de>
      b483b6aa
  24. 01 Feb, 2008 4 commits
  25. 28 Nov, 2007 1 commit
  26. 25 Oct, 2007 1 commit
  27. 12 Oct, 2007 1 commit
  28. 16 Feb, 2007 1 commit
  29. 28 Sep, 2006 1 commit
  30. 27 Sep, 2006 1 commit
  31. 26 Aug, 2006 1 commit
  32. 02 Aug, 2006 1 commit
    • Kim Oldfield's avatar
      USB: New USB ID for Belkin Serial Adapter · b7aa94b6
      Kim Oldfield authored
      
      
      Can you add the USB IDs for the Belkin USB Serial adapter (P/N F5U257)
      to the pl2303 driver in the Linux Kernel? Are you the appropriate person
      to approach for this?
      
      I recently purchased a Belkin USB Serial adapter (P/N F5U257) and found
      that it didn't work. After a bit of experimentation I found that it
      works with the pl2303 driver once the ID has been added. See attached
      patch to fix this. Also attached is the output from lsusb -v just in
      case you require any information from there.
      
      
      From: Kim Oldfield <luv@oldfield.wattle.id.au>
      Signed-off-by: default avatarGreg Kroah-Hartman <gregkh@suse.de>
      b7aa94b6
  33. 12 Jul, 2006 2 commits
  34. 27 Apr, 2006 1 commit
  35. 14 Apr, 2006 1 commit