Commit 41eb2d81 authored by Tony Lindgren's avatar Tony Lindgren
Browse files

ARM: OMAP2: Fix H4 matrix keyboard warning



Convert to use matrix keyboard to remove the warning
"Please update the board to use matrix-keypad driver".

Based on similar setup in palmtc.c. Note that this
patch is compile tested only because of lack of working
hardware.
Signed-off-by: default avatarTony Lindgren <tony@atomide.com>
parent 98e541ff
......@@ -25,6 +25,7 @@
#include <linux/err.h>
#include <linux/clk.h>
#include <linux/io.h>
#include <linux/input/matrix_keypad.h>
#include <mach/hardware.h>
#include <asm/mach-types.h>
......@@ -34,7 +35,6 @@
#include <plat/usb.h>
#include <plat/board.h>
#include <plat/common.h>
#include <plat/keypad.h>
#include <plat/menelaus.h>
#include <plat/dma.h>
#include <plat/gpmc.h>
......@@ -50,10 +50,8 @@
#define H4_ETHR_GPIO_IRQ 92
static unsigned int row_gpios[6] = { 88, 89, 124, 11, 6, 96 };
static unsigned int col_gpios[7] = { 90, 91, 100, 36, 12, 97, 98 };
static const unsigned int h4_keymap[] = {
#if defined(CONFIG_KEYBOARD_MATRIX) || defined(CONFIG_KEYBOARD_MATRIX_MODULE)
static const uint32_t board_matrix_keys[] = {
KEY(0, 0, KEY_LEFT),
KEY(1, 0, KEY_RIGHT),
KEY(2, 0, KEY_A),
......@@ -86,6 +84,71 @@ static const unsigned int h4_keymap[] = {
KEY(4, 5, KEY_ENTER),
};
static const struct matrix_keymap_data board_keymap_data = {
.keymap = board_matrix_keys,
.keymap_size = ARRAY_SIZE(board_matrix_keys),
};
static unsigned int board_keypad_row_gpios[] = {
88, 89, 124, 11, 6, 96
};
static unsigned int board_keypad_col_gpios[] = {
90, 91, 100, 36, 12, 97, 98
};
static struct matrix_keypad_platform_data board_keypad_platform_data = {
.keymap_data = &board_keymap_data,
.row_gpios = board_keypad_row_gpios,
.num_row_gpios = ARRAY_SIZE(board_keypad_row_gpios),
.col_gpios = board_keypad_col_gpios,
.num_col_gpios = ARRAY_SIZE(board_keypad_col_gpios),
.active_low = 1,
.debounce_ms = 20,
.col_scan_delay_us = 5,
};
static struct platform_device board_keyboard = {
.name = "matrix-keypad",
.id = -1,
.dev = {
.platform_data = &board_keypad_platform_data,
},
};
static void __init board_mkp_init(void)
{
omap_mux_init_gpio(88, OMAP_PULL_ENA | OMAP_PULL_UP);
omap_mux_init_gpio(89, OMAP_PULL_ENA | OMAP_PULL_UP);
omap_mux_init_gpio(124, OMAP_PULL_ENA | OMAP_PULL_UP);
omap_mux_init_signal("mcbsp2_dr.gpio_11", OMAP_PULL_ENA | OMAP_PULL_UP);
if (omap_has_menelaus()) {
omap_mux_init_signal("sdrc_a14.gpio0",
OMAP_PULL_ENA | OMAP_PULL_UP);
omap_mux_init_signal("vlynq_rx0.gpio_15", 0);
omap_mux_init_signal("gpio_98", 0);
board_keypad_row_gpios[5] = 0;
board_keypad_col_gpios[2] = 15;
board_keypad_col_gpios[6] = 18;
} else {
omap_mux_init_signal("gpio_96", OMAP_PULL_ENA | OMAP_PULL_UP);
omap_mux_init_signal("gpio_100", 0);
omap_mux_init_signal("gpio_98", 0);
}
omap_mux_init_signal("gpio_90", 0);
omap_mux_init_signal("gpio_91", 0);
omap_mux_init_signal("gpio_36", 0);
omap_mux_init_signal("mcbsp2_clkx.gpio_12", 0);
omap_mux_init_signal("gpio_97", 0);
platform_device_register(&board_keyboard);
}
#else
static inline void board_mkp_init(void)
{
}
#endif
static struct mtd_partition h4_partitions[] = {
/* bootloader (U-Boot, etc) in first sector */
{
......@@ -137,31 +200,8 @@ static struct platform_device h4_flash_device = {
.resource = &h4_flash_resource,
};
static const struct matrix_keymap_data h4_keymap_data = {
.keymap = h4_keymap,
.keymap_size = ARRAY_SIZE(h4_keymap),
};
static struct omap_kp_platform_data h4_kp_data = {
.rows = 6,
.cols = 7,
.keymap_data = &h4_keymap_data,
.rep = true,
.row_gpios = row_gpios,
.col_gpios = col_gpios,
};
static struct platform_device h4_kp_device = {
.name = "omap-keypad",
.id = -1,
.dev = {
.platform_data = &h4_kp_data,
},
};
static struct platform_device *h4_devices[] __initdata = {
&h4_flash_device,
&h4_kp_device,
};
static struct panel_generic_dpi_data h4_panel_data = {
......@@ -336,31 +376,7 @@ static void __init omap_h4_init(void)
* if not needed.
*/
#if defined(CONFIG_KEYBOARD_OMAP) || defined(CONFIG_KEYBOARD_OMAP_MODULE)
omap_mux_init_gpio(88, OMAP_PULL_ENA | OMAP_PULL_UP);
omap_mux_init_gpio(89, OMAP_PULL_ENA | OMAP_PULL_UP);
omap_mux_init_gpio(124, OMAP_PULL_ENA | OMAP_PULL_UP);
omap_mux_init_signal("mcbsp2_dr.gpio_11", OMAP_PULL_ENA | OMAP_PULL_UP);
if (omap_has_menelaus()) {
omap_mux_init_signal("sdrc_a14.gpio0",
OMAP_PULL_ENA | OMAP_PULL_UP);
omap_mux_init_signal("vlynq_rx0.gpio_15", 0);
omap_mux_init_signal("gpio_98", 0);
row_gpios[5] = 0;
col_gpios[2] = 15;
col_gpios[6] = 18;
} else {
omap_mux_init_signal("gpio_96", OMAP_PULL_ENA | OMAP_PULL_UP);
omap_mux_init_signal("gpio_100", 0);
omap_mux_init_signal("gpio_98", 0);
}
omap_mux_init_signal("gpio_90", 0);
omap_mux_init_signal("gpio_91", 0);
omap_mux_init_signal("gpio_36", 0);
omap_mux_init_signal("mcbsp2_clkx.gpio_12", 0);
omap_mux_init_signal("gpio_97", 0);
#endif
board_mkp_init();
i2c_register_board_info(1, h4_i2c_board_info,
ARRAY_SIZE(h4_i2c_board_info));
......
Supports Markdown
0% or .
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment