Commit 03010a33 authored by Theodore Ts'o's avatar Theodore Ts'o
Browse files

ext4: Rename ext4dev to ext4



The ext4 filesystem is getting stable enough that it's time to drop
the "dev" prefix.  Also remove the requirement for the TEST_FILESYS
flag.

Signed-off-by: default avatar"Theodore Ts'o" <tytso@mit.edu>
parent 39d80c33
......@@ -32,9 +32,9 @@ Mailing list: linux-ext4@vger.kernel.org
you will need to merge your changes with the version from e2fsprogs
1.41.x.
- Create a new filesystem using the ext4dev filesystem type:
- Create a new filesystem using the ext4 filesystem type:
# mke2fs -t ext4dev /dev/hda1
# mke2fs -t ext4 /dev/hda1
Or configure an existing ext3 filesystem to support extents and set
the test_fs flag to indicate that it's ok for an in-development
......@@ -47,13 +47,13 @@ Mailing list: linux-ext4@vger.kernel.org
# tune2fs -I 256 /dev/hda1
(Note: we currently do not have tools to convert an ext4dev
(Note: we currently do not have tools to convert an ext4
filesystem back to ext3; so please do not do try this on production
filesystems.)
- Mounting:
# mount -t ext4dev /dev/hda1 /wherever
# mount -t ext4 /dev/hda1 /wherever
- When comparing performance with other filesystems, remember that
ext3/4 by default offers higher data integrity guarantees than most.
......
......@@ -136,37 +136,51 @@ config EXT3_FS_SECURITY
If you are not using a security module that requires using
extended attributes for file security labels, say N.
config EXT4DEV_FS
tristate "Ext4dev/ext4 extended fs support development (EXPERIMENTAL)"
depends on EXPERIMENTAL
config EXT4_FS
tristate "The Extended 4 (ext4) filesystem"
select JBD2
select CRC16
help
Ext4dev is a predecessor filesystem of the next generation
extended fs ext4, based on ext3 filesystem code. It will be
renamed ext4 fs later, once ext4dev is mature and stabilized.
This is the next generation of the ext3 filesystem.
Unlike the change from ext2 filesystem to ext3 filesystem,
the on-disk format of ext4dev is not the same as ext3 any more:
it is based on extent maps and it supports 48-bit physical block
numbers. These combined on-disk format changes will allow
ext4dev/ext4 to handle more than 16 TB filesystem volumes --
a hard limit that ext3 cannot overcome without changing the
on-disk format.
Other than extent maps and 48-bit block numbers, ext4dev also is
likely to have other new features such as persistent preallocation,
high resolution time stamps, and larger file support etc. These
features will be added to ext4dev gradually.
the on-disk format of ext4 is not forwards compatible with
ext3; it is based on extent maps and it supports 48-bit
physical block numbers. The ext4 filesystem also supports delayed
allocation, persistent preallocation, high resolution time stamps,
and a number of other features to improve performance and speed
up fsck time. For more information, please see the web pages at
http://ext4.wiki.kernel.org.
The ext4 filesystem will support mounting an ext3
filesystem; while there will be some performance gains from
the delayed allocation and inode table readahead, the best
performance gains will require enabling ext4 features in the
filesystem, or formating a new filesystem as an ext4
filesystem initially.
To compile this file system support as a module, choose M here. The
module will be called ext4dev.
If unsure, say N.
config EXT4DEV_FS_XATTR
bool "Ext4dev extended attributes"
depends on EXT4DEV_FS
config EXT4DEV_COMPAT
bool "Enable ext4dev compatibility"
depends on EXT4_FS
help
Starting with 2.6.28, the name of the ext4 filesystem was
renamed from ext4dev to ext4. Unfortunately there are some
lagecy userspace programs (such as klibc's fstype) have
"ext4dev" hardcoded.
To enable backwards compatibility so that systems that are
still expecting to mount ext4 filesystems using ext4dev,
chose Y here. This feature will go away by 2.6.31, so
please arrange to get your userspace programs fixed!
config EXT4_FS_XATTR
bool "Ext4 extended attributes"
depends on EXT4_FS
default y
help
Extended attributes are name:value pairs associated with inodes by
......@@ -175,11 +189,11 @@ config EXT4DEV_FS_XATTR
If unsure, say N.
You need this for POSIX ACL support on ext4dev/ext4.
You need this for POSIX ACL support on ext4.
config EXT4DEV_FS_POSIX_ACL
bool "Ext4dev POSIX Access Control Lists"
depends on EXT4DEV_FS_XATTR
config EXT4_FS_POSIX_ACL
bool "Ext4 POSIX Access Control Lists"
depends on EXT4_FS_XATTR
select FS_POSIX_ACL
help
POSIX Access Control Lists (ACLs) support permissions for users and
......@@ -190,14 +204,14 @@ config EXT4DEV_FS_POSIX_ACL
If you don't know what Access Control Lists are, say N
config EXT4DEV_FS_SECURITY
bool "Ext4dev Security Labels"
depends on EXT4DEV_FS_XATTR
config EXT4_FS_SECURITY
bool "Ext4 Security Labels"
depends on EXT4_FS_XATTR
help
Security labels support alternative access control models
implemented by security modules like SELinux. This option
enables an extended attribute handler for file security
labels in the ext4dev/ext4 filesystem.
labels in the ext4 filesystem.
If you are not using a security module that requires using
extended attributes for file security labels, say N.
......@@ -240,22 +254,22 @@ config JBD2
help
This is a generic journaling layer for block devices that support
both 32-bit and 64-bit block numbers. It is currently used by
the ext4dev/ext4 filesystem, but it could also be used to add
the ext4 filesystem, but it could also be used to add
journal support to other file systems or block devices such
as RAID or LVM.
If you are using ext4dev/ext4, you need to say Y here. If you are not
using ext4dev/ext4 then you will probably want to say N.
If you are using ext4, you need to say Y here. If you are not
using ext4 then you will probably want to say N.
To compile this device as a module, choose M here. The module will be
called jbd2. If you are compiling ext4dev/ext4 into the kernel,
called jbd2. If you are compiling ext4 into the kernel,
you cannot compile this code as a module.
config JBD2_DEBUG
bool "JBD2 (ext4dev/ext4) debugging support"
bool "JBD2 (ext4) debugging support"
depends on JBD2 && DEBUG_FS
help
If you are using the ext4dev/ext4 journaled file system (or
If you are using the ext4 journaled file system (or
potentially any other filesystem/device using JBD2), this option
allows you to enable debugging output while the system is running,
in order to help track down any problems you are having.
......@@ -270,9 +284,9 @@ config JBD2_DEBUG
config FS_MBCACHE
# Meta block cache for Extended Attributes (ext2/ext3/ext4)
tristate
depends on EXT2_FS_XATTR || EXT3_FS_XATTR || EXT4DEV_FS_XATTR
default y if EXT2_FS=y || EXT3_FS=y || EXT4DEV_FS=y
default m if EXT2_FS=m || EXT3_FS=m || EXT4DEV_FS=m
depends on EXT2_FS_XATTR || EXT3_FS_XATTR || EXT4_FS_XATTR
default y if EXT2_FS=y || EXT3_FS=y || EXT4_FS=y
default m if EXT2_FS=m || EXT3_FS=m || EXT4_FS=m
config REISERFS_FS
tristate "Reiserfs support"
......
......@@ -69,7 +69,7 @@ obj-$(CONFIG_DLM) += dlm/
# Do not add any filesystems before this line
obj-$(CONFIG_REISERFS_FS) += reiserfs/
obj-$(CONFIG_EXT3_FS) += ext3/ # Before ext2 so root fs can be ext3
obj-$(CONFIG_EXT4DEV_FS) += ext4/ # Before ext2 so root fs can be ext4dev
obj-$(CONFIG_EXT4_FS) += ext4/ # Before ext2 so root fs can be ext4dev
obj-$(CONFIG_JBD) += jbd/
obj-$(CONFIG_JBD2) += jbd2/
obj-$(CONFIG_EXT2_FS) += ext2/
......
......@@ -2,12 +2,12 @@
# Makefile for the linux ext4-filesystem routines.
#
obj-$(CONFIG_EXT4DEV_FS) += ext4dev.o
obj-$(CONFIG_EXT4_FS) += ext4.o
ext4dev-y := balloc.o bitmap.o dir.o file.o fsync.o ialloc.o inode.o \
ext4-y := balloc.o bitmap.o dir.o file.o fsync.o ialloc.o inode.o \
ioctl.o namei.o super.o symlink.o hash.o resize.o extents.o \
ext4_jbd2.o migrate.o mballoc.o
ext4dev-$(CONFIG_EXT4DEV_FS_XATTR) += xattr.o xattr_user.o xattr_trusted.o
ext4dev-$(CONFIG_EXT4DEV_FS_POSIX_ACL) += acl.o
ext4dev-$(CONFIG_EXT4DEV_FS_SECURITY) += xattr_security.o
ext4-$(CONFIG_EXT4_FS_XATTR) += xattr.o xattr_user.o xattr_trusted.o
ext4-$(CONFIG_EXT4_FS_POSIX_ACL) += acl.o
ext4-$(CONFIG_EXT4_FS_SECURITY) += xattr_security.o
......@@ -51,7 +51,7 @@ static inline int ext4_acl_count(size_t size)
}
}
#ifdef CONFIG_EXT4DEV_FS_POSIX_ACL
#ifdef CONFIG_EXT4_FS_POSIX_ACL
/* Value for inode->u.ext4_i.i_acl and inode->u.ext4_i.i_default_acl
if the ACL has not been cached */
......@@ -62,7 +62,7 @@ extern int ext4_permission(struct inode *, int);
extern int ext4_acl_chmod(struct inode *);
extern int ext4_init_acl(handle_t *, struct inode *, struct inode *);
#else /* CONFIG_EXT4DEV_FS_POSIX_ACL */
#else /* CONFIG_EXT4_FS_POSIX_ACL */
#include <linux/sched.h>
#define ext4_permission NULL
......@@ -77,5 +77,5 @@ ext4_init_acl(handle_t *handle, struct inode *inode, struct inode *dir)
{
return 0;
}
#endif /* CONFIG_EXT4DEV_FS_POSIX_ACL */
#endif /* CONFIG_EXT4_FS_POSIX_ACL */
......@@ -66,7 +66,7 @@ struct ext4_inode_info {
__u32 i_state; /* Dynamic state flags for ext4 */
ext4_lblk_t i_dir_start_lookup;
#ifdef CONFIG_EXT4DEV_FS_XATTR
#ifdef CONFIG_EXT4_FS_XATTR
/*
* Extended attributes can be read independently of the main file
* data. Taking i_mutex even when reading would cause contention
......@@ -76,7 +76,7 @@ struct ext4_inode_info {
*/
struct rw_semaphore xattr_sem;
#endif
#ifdef CONFIG_EXT4DEV_FS_POSIX_ACL
#ifdef CONFIG_EXT4_FS_POSIX_ACL
struct posix_acl *i_acl;
struct posix_acl *i_default_acl;
#endif
......
......@@ -165,7 +165,7 @@ const struct inode_operations ext4_file_inode_operations = {
.truncate = ext4_truncate,
.setattr = ext4_setattr,
.getattr = ext4_getattr,
#ifdef CONFIG_EXT4DEV_FS_XATTR
#ifdef CONFIG_EXT4_FS_XATTR
.setxattr = generic_setxattr,
.getxattr = generic_getxattr,
.listxattr = ext4_listxattr,
......
......@@ -4041,7 +4041,7 @@ struct inode *ext4_iget(struct super_block *sb, unsigned long ino)
return inode;
ei = EXT4_I(inode);
#ifdef CONFIG_EXT4DEV_FS_POSIX_ACL
#ifdef CONFIG_EXT4_FS_POSIX_ACL
ei->i_acl = EXT4_ACL_NOT_CACHED;
ei->i_default_acl = EXT4_ACL_NOT_CACHED;
#endif
......
......@@ -1773,7 +1773,7 @@ static int ext4_mknod(struct inode *dir, struct dentry *dentry,
err = PTR_ERR(inode);
if (!IS_ERR(inode)) {
init_special_inode(inode, inode->i_mode, rdev);
#ifdef CONFIG_EXT4DEV_FS_XATTR
#ifdef CONFIG_EXT4_FS_XATTR
inode->i_op = &ext4_special_inode_operations;
#endif
err = ext4_add_nondir(handle, dentry, inode);
......@@ -2456,7 +2456,7 @@ const struct inode_operations ext4_dir_inode_operations = {
.mknod = ext4_mknod,
.rename = ext4_rename,
.setattr = ext4_setattr,
#ifdef CONFIG_EXT4DEV_FS_XATTR
#ifdef CONFIG_EXT4_FS_XATTR
.setxattr = generic_setxattr,
.getxattr = generic_getxattr,
.listxattr = ext4_listxattr,
......@@ -2467,7 +2467,7 @@ const struct inode_operations ext4_dir_inode_operations = {
const struct inode_operations ext4_special_inode_operations = {
.setattr = ext4_setattr,
#ifdef CONFIG_EXT4DEV_FS_XATTR
#ifdef CONFIG_EXT4_FS_XATTR
.setxattr = generic_setxattr,
.getxattr = generic_getxattr,
.listxattr = ext4_listxattr,
......
......@@ -569,7 +569,7 @@ static struct inode *ext4_alloc_inode(struct super_block *sb)
ei = kmem_cache_alloc(ext4_inode_cachep, GFP_NOFS);
if (!ei)
return NULL;
#ifdef CONFIG_EXT4DEV_FS_POSIX_ACL
#ifdef CONFIG_EXT4_FS_POSIX_ACL
ei->i_acl = EXT4_ACL_NOT_CACHED;
ei->i_default_acl = EXT4_ACL_NOT_CACHED;
#endif
......@@ -605,7 +605,7 @@ static void init_once(void *foo)
struct ext4_inode_info *ei = (struct ext4_inode_info *) foo;
INIT_LIST_HEAD(&ei->i_orphan);
#ifdef CONFIG_EXT4DEV_FS_XATTR
#ifdef CONFIG_EXT4_FS_XATTR
init_rwsem(&ei->xattr_sem);
#endif
init_rwsem(&ei->i_data_sem);
......@@ -631,7 +631,7 @@ static void destroy_inodecache(void)
static void ext4_clear_inode(struct inode *inode)
{
#ifdef CONFIG_EXT4DEV_FS_POSIX_ACL
#ifdef CONFIG_EXT4_FS_POSIX_ACL
if (EXT4_I(inode)->i_acl &&
EXT4_I(inode)->i_acl != EXT4_ACL_NOT_CACHED) {
posix_acl_release(EXT4_I(inode)->i_acl);
......@@ -720,7 +720,7 @@ static int ext4_show_options(struct seq_file *seq, struct vfsmount *vfs)
seq_puts(seq, ",debug");
if (test_opt(sb, OLDALLOC))
seq_puts(seq, ",oldalloc");
#ifdef CONFIG_EXT4DEV_FS_XATTR
#ifdef CONFIG_EXT4_FS_XATTR
if (test_opt(sb, XATTR_USER) &&
!(def_mount_opts & EXT4_DEFM_XATTR_USER))
seq_puts(seq, ",user_xattr");
......@@ -729,7 +729,7 @@ static int ext4_show_options(struct seq_file *seq, struct vfsmount *vfs)
seq_puts(seq, ",nouser_xattr");
}
#endif
#ifdef CONFIG_EXT4DEV_FS_POSIX_ACL
#ifdef CONFIG_EXT4_FS_POSIX_ACL
if (test_opt(sb, POSIX_ACL) && !(def_mount_opts & EXT4_DEFM_ACL))
seq_puts(seq, ",acl");
if (!test_opt(sb, POSIX_ACL) && (def_mount_opts & EXT4_DEFM_ACL))
......@@ -1078,7 +1078,7 @@ static int parse_options(char *options, struct super_block *sb,
case Opt_orlov:
clear_opt(sbi->s_mount_opt, OLDALLOC);
break;
#ifdef CONFIG_EXT4DEV_FS_XATTR
#ifdef CONFIG_EXT4_FS_XATTR
case Opt_user_xattr:
set_opt(sbi->s_mount_opt, XATTR_USER);
break;
......@@ -1092,7 +1092,7 @@ static int parse_options(char *options, struct super_block *sb,
"not supported\n");
break;
#endif
#ifdef CONFIG_EXT4DEV_FS_POSIX_ACL
#ifdef CONFIG_EXT4_FS_POSIX_ACL
case Opt_acl:
set_opt(sbi->s_mount_opt, POSIX_ACL);
break;
......@@ -1987,11 +1987,11 @@ static int ext4_fill_super(struct super_block *sb, void *data, int silent)
set_opt(sbi->s_mount_opt, GRPID);
if (def_mount_opts & EXT4_DEFM_UID16)
set_opt(sbi->s_mount_opt, NO_UID32);
#ifdef CONFIG_EXT4DEV_FS_XATTR
#ifdef CONFIG_EXT4_FS_XATTR
if (def_mount_opts & EXT4_DEFM_XATTR_USER)
set_opt(sbi->s_mount_opt, XATTR_USER);
#endif
#ifdef CONFIG_EXT4DEV_FS_POSIX_ACL
#ifdef CONFIG_EXT4_FS_POSIX_ACL
if (def_mount_opts & EXT4_DEFM_ACL)
set_opt(sbi->s_mount_opt, POSIX_ACL);
#endif
......@@ -2049,16 +2049,6 @@ static int ext4_fill_super(struct super_block *sb, void *data, int silent)
"EXT4-fs warning: feature flags set on rev 0 fs, "
"running e2fsck is recommended\n");
/*
* Since ext4 is still considered development code, we require
* that the TEST_FILESYS flag in s->flags be set.
*/
if (!(le32_to_cpu(es->s_flags) & EXT2_FLAGS_TEST_FILESYS)) {
printk(KERN_WARNING "EXT4-fs: %s: not marked "
"OK to use with test code.\n", sb->s_id);
goto failed_mount;
}
/*
* Check feature flags regardless of the revision level, since we
* previously didn't change the revision level when setting the flags,
......@@ -3580,13 +3570,34 @@ const struct file_operations ext4_ui_proc_fops = {
};
#endif
static struct file_system_type ext4_fs_type = {
.owner = THIS_MODULE,
.name = "ext4",
.get_sb = ext4_get_sb,
.kill_sb = kill_block_super,
.fs_flags = FS_REQUIRES_DEV,
};
#ifdef CONFIG_EXT4DEV_COMPAT
static int ext4dev_get_sb(struct file_system_type *fs_type,
int flags, const char *dev_name, void *data, struct vfsmount *mnt)
{
printk(KERN_WARNING "EXT4-fs: Update your userspace programs "
"to mount using ext4\n");
printk(KERN_WARNING "EXT4-fs: ext4dev backwards compatibility "
"will go away by 2.6.31\n");
return get_sb_bdev(fs_type, flags, dev_name, data, ext4_fill_super, mnt);
}
static struct file_system_type ext4dev_fs_type = {
.owner = THIS_MODULE,
.name = "ext4dev",
.get_sb = ext4_get_sb,
.get_sb = ext4dev_get_sb,
.kill_sb = kill_block_super,
.fs_flags = FS_REQUIRES_DEV,
};
MODULE_ALIAS("ext4dev");
#endif
static int __init init_ext4_fs(void)
{
......@@ -3603,9 +3614,16 @@ static int __init init_ext4_fs(void)
err = init_inodecache();
if (err)
goto out1;
err = register_filesystem(&ext4dev_fs_type);
err = register_filesystem(&ext4_fs_type);
if (err)
goto out;
#ifdef CONFIG_EXT4DEV_COMPAT
err = register_filesystem(&ext4dev_fs_type);
if (err) {
unregister_filesystem(&ext4_fs_type);
goto out;
}
#endif
return 0;
out:
destroy_inodecache();
......@@ -3618,7 +3636,10 @@ static int __init init_ext4_fs(void)
static void __exit exit_ext4_fs(void)
{
unregister_filesystem(&ext4_fs_type);
#ifdef CONFIG_EXT4DEV_COMPAT
unregister_filesystem(&ext4dev_fs_type);
#endif
destroy_inodecache();
exit_ext4_xattr();
exit_ext4_mballoc();
......
......@@ -34,7 +34,7 @@ const struct inode_operations ext4_symlink_inode_operations = {
.readlink = generic_readlink,
.follow_link = page_follow_link_light,
.put_link = page_put_link,
#ifdef CONFIG_EXT4DEV_FS_XATTR
#ifdef CONFIG_EXT4_FS_XATTR
.setxattr = generic_setxattr,
.getxattr = generic_getxattr,
.listxattr = ext4_listxattr,
......@@ -45,7 +45,7 @@ const struct inode_operations ext4_symlink_inode_operations = {
const struct inode_operations ext4_fast_symlink_inode_operations = {
.readlink = generic_readlink,
.follow_link = ext4_follow_link,
#ifdef CONFIG_EXT4DEV_FS_XATTR
#ifdef CONFIG_EXT4_FS_XATTR
.setxattr = generic_setxattr,
.getxattr = generic_getxattr,
.listxattr = ext4_listxattr,
......
......@@ -99,12 +99,12 @@ static struct mb_cache *ext4_xattr_cache;
static struct xattr_handler *ext4_xattr_handler_map[] = {
[EXT4_XATTR_INDEX_USER] = &ext4_xattr_user_handler,
#ifdef CONFIG_EXT4DEV_FS_POSIX_ACL
#ifdef CONFIG_EXT4_FS_POSIX_ACL
[EXT4_XATTR_INDEX_POSIX_ACL_ACCESS] = &ext4_xattr_acl_access_handler,
[EXT4_XATTR_INDEX_POSIX_ACL_DEFAULT] = &ext4_xattr_acl_default_handler,
#endif
[EXT4_XATTR_INDEX_TRUSTED] = &ext4_xattr_trusted_handler,
#ifdef CONFIG_EXT4DEV_FS_SECURITY
#ifdef CONFIG_EXT4_FS_SECURITY
[EXT4_XATTR_INDEX_SECURITY] = &ext4_xattr_security_handler,
#endif
};
......@@ -112,11 +112,11 @@ static struct xattr_handler *ext4_xattr_handler_map[] = {
struct xattr_handler *ext4_xattr_handlers[] = {
&ext4_xattr_user_handler,
&ext4_xattr_trusted_handler,
#ifdef CONFIG_EXT4DEV_FS_POSIX_ACL
#ifdef CONFIG_EXT4_FS_POSIX_ACL
&ext4_xattr_acl_access_handler,
&ext4_xattr_acl_default_handler,
#endif
#ifdef CONFIG_EXT4DEV_FS_SECURITY
#ifdef CONFIG_EXT4_FS_SECURITY
&ext4_xattr_security_handler,
#endif
NULL
......
......@@ -63,7 +63,7 @@ struct ext4_xattr_entry {
EXT4_I(inode)->i_extra_isize))
#define IFIRST(hdr) ((struct ext4_xattr_entry *)((hdr)+1))
# ifdef CONFIG_EXT4DEV_FS_XATTR
# ifdef CONFIG_EXT4_FS_XATTR
extern struct xattr_handler ext4_xattr_user_handler;
extern struct xattr_handler ext4_xattr_trusted_handler;
......@@ -88,7 +88,7 @@ extern void exit_ext4_xattr(void);
extern struct xattr_handler *ext4_xattr_handlers[];
# else /* CONFIG_EXT4DEV_FS_XATTR */
# else /* CONFIG_EXT4_FS_XATTR */
static inline int
ext4_xattr_get(struct inode *inode, int name_index, const char *name,
......@@ -141,9 +141,9 @@ ext4_expand_extra_isize_ea(struct inode *inode, int new_extra_isize,
#define ext4_xattr_handlers NULL
# endif /* CONFIG_EXT4DEV_FS_XATTR */
# endif /* CONFIG_EXT4_FS_XATTR */
#ifdef CONFIG_EXT4DEV_FS_SECURITY
#ifdef CONFIG_EXT4_FS_SECURITY
extern int ext4_init_security(handle_t *handle, struct inode *inode,
struct inode *dir);
#else
......
Supports Markdown
0% or .
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment