Commit 2fa96277 authored by Geoffrey D. Bennett's avatar Geoffrey D. Bennett Committed by Takashi Iwai
Browse files

ALSA: usb-audio: scarlett2: Add support for Solo and 2i2 Gen 3



Add initial support for the Focusrite Scarlett Solo and 2i2 devices:
- They have no mixer
- They don't support reporting sync status or levels
- The configuration space is laid out differently to the other models
- There is no level (line/inst) switch on input 1 of the Solo

Co-developed-by: default avatarVladimir Sadovnikov <sadko4u@gmail.com>
Signed-off-by: default avatarVladimir Sadovnikov <sadko4u@gmail.com>
Signed-off-by: default avatarGeoffrey D. Bennett <g@b4.vu>
Link: https://lore.kernel.org/r/190b90f6f1f8f8d4dfb5f0a7761ff8ae5c40fdde.1624379707.git.g@b4.vu


Signed-off-by: default avatarTakashi Iwai <tiwai@suse.de>
parent 9e15fae6
......@@ -3060,6 +3060,8 @@ int snd_usb_mixer_apply_create_quirk(struct usb_mixer_interface *mixer)
case USB_ID(0x1235, 0x8203): /* Focusrite Scarlett 6i6 2nd Gen */
case USB_ID(0x1235, 0x8204): /* Focusrite Scarlett 18i8 2nd Gen */
case USB_ID(0x1235, 0x8201): /* Focusrite Scarlett 18i20 2nd Gen */
case USB_ID(0x1235, 0x8211): /* Focusrite Scarlett Solo 3rd Gen */
case USB_ID(0x1235, 0x8210): /* Focusrite Scarlett 2i2 3rd Gen */
case USB_ID(0x1235, 0x8212): /* Focusrite Scarlett 4i4 3rd Gen */
case USB_ID(0x1235, 0x8213): /* Focusrite Scarlett 8i6 3rd Gen */
case USB_ID(0x1235, 0x8214): /* Focusrite Scarlett 18i8 3rd Gen */
......
......@@ -4,9 +4,10 @@
*
* Supported models:
* - 6i6/18i8/18i20 Gen 2
* - 4i4/8i6/18i8/18i20 Gen 3
* - Solo/2i2/4i4/8i6/18i8/18i20 Gen 3
*
* Copyright (c) 2018-2021 by Geoffrey D. Bennett <g at b4.vu>
* Copyright (c) 2020-2021 by Vladimir Sadovnikov <sadko4u@gmail.com>
*
* Based on the Scarlett (Gen 1) Driver for ALSA:
*
......@@ -44,6 +45,9 @@
* interface during driver initialisation added in May 2021 (thanks to
* Vladimir Sadovnikov for figuring out how).
*
* Support for Solo/2i2 Gen 3 added in May 2021 (thanks to Alexander
* Vorona for 2i2 protocol traces).
*
* This ALSA mixer gives access to (model-dependent):
* - input, output, mixer-matrix muxes
* - mixer-matrix gain stages
......@@ -297,6 +301,11 @@ struct scarlett2_device_info {
*/
u8 has_msd_mode;
/* Gen 3 devices without a mixer have a different
* configuration set
*/
u8 has_mixer;
/* line out hw volume is sw controlled */
u8 line_out_hw_vol;
......@@ -305,6 +314,9 @@ struct scarlett2_device_info {
*/
u8 level_input_count;
/* the first input with a level control (0-based) */
u8 level_input_first;
/* the number of analogue inputs with a software switchable
* 10dB pad control
*/
......@@ -362,6 +374,7 @@ struct scarlett2_data {
static const struct scarlett2_device_info s6i6_gen2_info = {
.usb_id = USB_ID(0x1235, 0x8203),
.has_mixer = 1,
.level_input_count = 2,
.pad_input_count = 2,
......@@ -407,6 +420,7 @@ static const struct scarlett2_device_info s6i6_gen2_info = {
static const struct scarlett2_device_info s18i8_gen2_info = {
.usb_id = USB_ID(0x1235, 0x8204),
.has_mixer = 1,
.level_input_count = 2,
.pad_input_count = 4,
......@@ -455,6 +469,7 @@ static const struct scarlett2_device_info s18i8_gen2_info = {
static const struct scarlett2_device_info s18i20_gen2_info = {
.usb_id = USB_ID(0x1235, 0x8201),
.has_mixer = 1,
.line_out_hw_vol = 1,
.line_out_descrs = {
......@@ -505,10 +520,26 @@ static const struct scarlett2_device_info s18i20_gen2_info = {
} },
};
static const struct scarlett2_device_info solo_gen3_info = {
.usb_id = USB_ID(0x1235, 0x8211),
.has_msd_mode = 1,
.level_input_count = 1,
.level_input_first = 1,
};
static const struct scarlett2_device_info s2i2_gen3_info = {
.usb_id = USB_ID(0x1235, 0x8210),
.has_msd_mode = 1,
.level_input_count = 2,
};
static const struct scarlett2_device_info s4i4_gen3_info = {
.usb_id = USB_ID(0x1235, 0x8212),
.has_msd_mode = 1,
.has_mixer = 1,
.level_input_count = 2,
.pad_input_count = 2,
......@@ -551,6 +582,7 @@ static const struct scarlett2_device_info s8i6_gen3_info = {
.usb_id = USB_ID(0x1235, 0x8213),
.has_msd_mode = 1,
.has_mixer = 1,
.level_input_count = 2,
.pad_input_count = 2,
......@@ -600,6 +632,7 @@ static const struct scarlett2_device_info s18i8_gen3_info = {
.usb_id = USB_ID(0x1235, 0x8214),
.has_msd_mode = 1,
.has_mixer = 1,
.line_out_hw_vol = 1,
.level_input_count = 2,
.pad_input_count = 2,
......@@ -662,6 +695,7 @@ static const struct scarlett2_device_info s18i20_gen3_info = {
.usb_id = USB_ID(0x1235, 0x8215),
.has_msd_mode = 1,
.has_mixer = 1,
.line_out_hw_vol = 1,
.level_input_count = 2,
.pad_input_count = 8,
......@@ -724,6 +758,8 @@ static const struct scarlett2_device_info *scarlett2_devices[] = {
&s18i20_gen2_info,
/* Supported Gen 3 devices */
&solo_gen3_info,
&s2i2_gen3_info,
&s4i4_gen3_info,
&s8i6_gen3_info,
&s18i8_gen3_info,
......@@ -776,7 +812,7 @@ static int scarlett2_get_port_start_num(
#define SCARLETT2_USB_VOLUME_STATUS_OFFSET 0x31
#define SCARLETT2_USB_METER_LEVELS_GET_MAGIC 1
/* volume status is read together (matches scarlett2_config_items[]) */
/* volume status is read together (matches scarlett2_config_items[1]) */
struct scarlett2_usb_volume_status {
/* dim/mute buttons */
u8 dim_mute[SCARLETT2_DIM_MUTE_COUNT];
......@@ -822,8 +858,22 @@ struct scarlett2_config {
u8 activate;
};
/* scarlett2_config_items[0] is for devices without a mixer
* scarlett2_config_items[1] is for devices with a mixer
*/
static const struct scarlett2_config
scarlett2_config_items[SCARLETT2_CONFIG_COUNT] = {
scarlett2_config_items[2][SCARLETT2_CONFIG_COUNT] =
/* Devices without a mixer (Solo and 2i2 Gen 3) */
{ {
[SCARLETT2_CONFIG_MSD_SWITCH] = {
.offset = 0x04, .size = 8, .activate = 6 },
[SCARLETT2_CONFIG_LEVEL_SWITCH] = {
.offset = 0x08, .size = 1, .activate = 7 },
/* Devices with a mixer (Gen 2 and all other Gen 3) */
}, {
[SCARLETT2_CONFIG_DIM_MUTE] = {
.offset = 0x31, .size = 8, .activate = 2 },
......@@ -844,7 +894,7 @@ static const struct scarlett2_config
[SCARLETT2_CONFIG_MSD_SWITCH] = {
.offset = 0x9d, .size = 8, .activate = 6 },
};
} };
/* proprietary request/response format */
struct scarlett2_usb_packet {
......@@ -1006,8 +1056,10 @@ static int scarlett2_usb_get_config(
struct usb_mixer_interface *mixer,
int config_item_num, int count, void *buf)
{
struct scarlett2_data *private = mixer->private_data;
const struct scarlett2_device_info *info = private->info;
const struct scarlett2_config *config_item =
&scarlett2_config_items[config_item_num];
&scarlett2_config_items[info->has_mixer][config_item_num];
int size, err, i;
u8 value;
......@@ -1055,8 +1107,10 @@ static int scarlett2_usb_set_config(
struct usb_mixer_interface *mixer,
int config_item_num, int index, int value)
{
struct scarlett2_data *private = mixer->private_data;
const struct scarlett2_device_info *info = private->info;
const struct scarlett2_config *config_item =
&scarlett2_config_items[config_item_num];
&scarlett2_config_items[info->has_mixer][config_item_num];
struct {
__le32 offset;
__le32 bytes;
......@@ -1065,7 +1119,6 @@ static int scarlett2_usb_set_config(
__le32 req2;
int offset, size;
int err;
struct scarlett2_data *private = mixer->private_data;
/* Cancel any pending NVRAM save */
cancel_delayed_work_sync(&private->work);
......@@ -1511,6 +1564,10 @@ static int scarlett2_add_sync_ctl(struct usb_mixer_interface *mixer)
{
struct scarlett2_data *private = mixer->private_data;
/* devices without a mixer also don't support reporting sync status */
if (!private->info->has_mixer)
return 0;
return scarlett2_add_new_ctl(mixer, &scarlett2_sync_ctl,
0, 1, "Sync Status", &private->sync_ctl);
}
......@@ -1829,7 +1886,8 @@ static int scarlett2_update_input_other(struct usb_mixer_interface *mixer)
if (info->level_input_count) {
int err = scarlett2_usb_get_config(
mixer, SCARLETT2_CONFIG_LEVEL_SWITCH,
info->level_input_count, private->level_switch);
info->level_input_count + info->level_input_first,
private->level_switch);
if (err < 0)
return err;
}
......@@ -1861,12 +1919,14 @@ static int scarlett2_level_enum_ctl_get(struct snd_kcontrol *kctl,
struct usb_mixer_elem_info *elem = kctl->private_data;
struct usb_mixer_interface *mixer = elem->head.mixer;
struct scarlett2_data *private = mixer->private_data;
const struct scarlett2_device_info *info = private->info;
int index = elem->control + info->level_input_first;
mutex_lock(&private->data_mutex);
if (private->input_other_updated)
scarlett2_update_input_other(mixer);
ucontrol->value.enumerated.item[0] =
private->level_switch[elem->control];
ucontrol->value.enumerated.item[0] = private->level_switch[index];
mutex_unlock(&private->data_mutex);
return 0;
......@@ -1878,8 +1938,9 @@ static int scarlett2_level_enum_ctl_put(struct snd_kcontrol *kctl,
struct usb_mixer_elem_info *elem = kctl->private_data;
struct usb_mixer_interface *mixer = elem->head.mixer;
struct scarlett2_data *private = mixer->private_data;
const struct scarlett2_device_info *info = private->info;
int index = elem->control;
int index = elem->control + info->level_input_first;
int oval, val, err = 0;
mutex_lock(&private->data_mutex);
......@@ -2135,7 +2196,8 @@ static int scarlett2_add_line_in_ctls(struct usb_mixer_interface *mixer)
/* Add input level (line/inst) controls */
for (i = 0; i < info->level_input_count; i++) {
snprintf(s, sizeof(s), fmt, i + 1, "Level", "Enum");
snprintf(s, sizeof(s), fmt, i + 1 + info->level_input_first,
"Level", "Enum");
err = scarlett2_add_new_ctl(mixer, &scarlett2_level_enum_ctl,
i, 1, s, &private->level_ctls[i]);
if (err < 0)
......@@ -2416,6 +2478,10 @@ static int scarlett2_add_meter_ctl(struct usb_mixer_interface *mixer)
{
struct scarlett2_data *private = mixer->private_data;
/* devices without a mixer also don't support reporting levels */
if (!private->info->has_mixer)
return 0;
return scarlett2_add_new_ctl(mixer, &scarlett2_meter_ctl,
0, private->num_mux_dsts,
"Level Meter", NULL);
......@@ -2639,6 +2705,10 @@ static int scarlett2_read_configs(struct usb_mixer_interface *mixer)
if (err < 0)
return err;
/* the rest of the configuration is for devices with a mixer */
if (!info->has_mixer)
return 0;
err = scarlett2_update_sync(mixer);
if (err < 0)
return err;
......
Supports Markdown
0% or .
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment