Commit 5eda227f authored by Hartmut Hackmann's avatar Hartmut Hackmann Committed by Mauro Carvalho Chehab
Browse files

V4L/DVB (4307): Added support for the md8800 quadro board



Analog TV, CVBS, S-video and DVB-T are working,
DVB-S not yet

Signed-off-by: default avatarHartmut Hackmann <hartmut.hackmann@t-online.de>
Signed-off-by: default avatarMauro Carvalho Chehab <mchehab@infradead.org>
parent 19e22576
......@@ -94,3 +94,4 @@
93 -> Medion 7134 Bridge #2 [16be:0005]
94 -> LifeView FlyDVB-T Hybrid Cardbus [5168:3306,5168:3502]
95 -> LifeView FlyVIDEO3000 (NTSC) [5169:0138]
96 -> Medion Md8800 Quadro [16be:0007,16be:0008]
......@@ -2891,6 +2891,29 @@ struct saa7134_board saa7134_boards[] = {
.gpio = 0x8000,
},
},
[SAA7134_BOARD_MEDION_MD8800_QUADRO] = {
.name = "Medion Md8800 Quadro",
.audio_clock = 0x00187de7,
.tuner_type = TUNER_PHILIPS_TDA8290,
.radio_type = UNSET,
.tuner_addr = ADDR_UNSET,
.radio_addr = ADDR_UNSET,
.mpeg = SAA7134_MPEG_DVB,
.inputs = {{
.name = name_tv,
.vmux = 1,
.amux = TV,
.tv = 1,
},{
.name = name_comp1,
.vmux = 0,
.amux = LINE2,
},{
.name = name_svideo,
.vmux = 8,
.amux = LINE2,
}},
},
};
const unsigned int saa7134_bcount = ARRAY_SIZE(saa7134_boards);
......@@ -3445,6 +3468,18 @@ struct pci_device_id saa7134_pci_tbl[] = {
.subvendor = 0x5168,
.subdevice = 0x3502, /* whats the difference to 0x3306 ?*/
.driver_data = SAA7134_BOARD_FLYDVBT_HYBRID_CARDBUS,
},{
.vendor = PCI_VENDOR_ID_PHILIPS,
.device = PCI_DEVICE_ID_PHILIPS_SAA7133,
.subvendor = 0x16be,
.subdevice = 0x0007,
.driver_data = SAA7134_BOARD_MEDION_MD8800_QUADRO,
},{
.vendor = PCI_VENDOR_ID_PHILIPS,
.device = PCI_DEVICE_ID_PHILIPS_SAA7133,
.subvendor = 0x16be,
.subdevice = 0x0008,
.driver_data = SAA7134_BOARD_MEDION_MD8800_QUADRO,
},{
/* --- boards without eeprom + subsystem ID --- */
.vendor = PCI_VENDOR_ID_PHILIPS,
......@@ -3732,6 +3767,7 @@ int saa7134_board_init2(struct saa7134_dev *dev)
case SAA7134_BOARD_PHILIPS_TIGER:
case SAA7134_BOARD_TEVION_DVBT_220RF:
case SAA7134_BOARD_ASUSTeK_P7131_DUAL:
case SAA7134_BOARD_MEDION_MD8800_QUADRO:
/* this is a hybrid board, initialize to analog mode
* and configure firmware eeprom address
*/
......
......@@ -969,6 +969,51 @@ static struct tda1004x_config tevion_dvbt220rf_config = {
.request_firmware = NULL,
};
/* ------------------------------------------------------------------ */
static int md8800_dvbt_analog_mode(struct dvb_frontend *fe)
{
struct saa7134_dev *dev = fe->dvb->priv;
static u8 data[] = { 0x3c, 0x33, 0x68};
struct i2c_msg msg = {.addr=0x08, .flags=0, .buf=data, .len = sizeof(data)};
i2c_transfer(&dev->i2c_adap, &msg, 1);
philips_tda827xa_tuner_sleep( 0x61, fe);
return 0;
}
static int md8800_dvbt_pll_set(struct dvb_frontend *fe, struct dvb_frontend_parameters *params)
{
int ret;
struct saa7134_dev *dev = fe->dvb->priv;
static u8 tda8290_close[] = { 0x21, 0xc0};
static u8 tda8290_open[] = { 0x21, 0x80};
struct i2c_msg tda8290_msg = {.addr = 0x4b,.flags = 0, .len = 2};
/* close tda8290 i2c bridge */
tda8290_msg.buf = tda8290_close;
ret = i2c_transfer(&dev->i2c_adap, &tda8290_msg, 1);
if (ret != 1)
return -EIO;
msleep(20);
ret = philips_tda827xa_pll_set(0x60, fe, params);
if (ret != 0)
return ret;
/* open tda8290 i2c bridge */
tda8290_msg.buf = tda8290_open;
i2c_transfer(&dev->i2c_adap, &tda8290_msg, 1);
return ret;
}
static struct tda1004x_config md8800_dvbt_config = {
.demod_address = 0x08,
.invert = 1,
.invert_oclk = 0,
.xtal_freq = TDA10046_XTAL_16M,
.agc_config = TDA10046_AGC_TDA827X,
.if_freq = TDA10046_FREQ_045,
.request_firmware = NULL,
};
#endif
/* ------------------------------------------------------------------ */
......@@ -1153,6 +1198,15 @@ static int dvb_init(struct saa7134_dev *dev)
dev->dvb.frontend->ops.tuner_ops.set_params = ads_duo_tuner_set_params;
}
break;
case SAA7134_BOARD_MEDION_MD8800_QUADRO:
dev->dvb.frontend = tda10046_attach(&md8800_dvbt_config,
&dev->i2c_adap);
if (dev->dvb.frontend) {
dev->dvb.frontend->ops.tuner_ops.init = philips_tiger_tuner_init;
dev->dvb.frontend->ops.tuner_ops.sleep = md8800_dvbt_analog_mode;
dev->dvb.frontend->ops.tuner_ops.set_params = md8800_dvbt_pll_set;
}
break;
#endif
#ifdef HAVE_NXT200X
case SAA7134_BOARD_AVERMEDIA_AVERTVHD_A180:
......
......@@ -223,6 +223,7 @@ struct saa7134_format {
#define SAA7134_BOARD_MD7134_BRIDGE_2 93
#define SAA7134_BOARD_FLYDVBT_HYBRID_CARDBUS 94
#define SAA7134_BOARD_FLYVIDEO3000_NTSC 95
#define SAA7134_BOARD_MEDION_MD8800_QUADRO 96
#define SAA7134_MAXBOARDS 8
#define SAA7134_INPUT_MAX 8
......
Supports Markdown
0% or .
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment