Commit 8a7bf751 authored by Johan Hovold's avatar Johan Hovold
Browse files

USB: serial: pl2303: amend and tighten type detection



Add support for detecting the HX, TA, TB and HXD device types and refuse
to bind to any unknown types.

Note that the HX type includes the XA variant, while the HXD type
includes the EA, RA and SA variants.
Signed-off-by: default avatarJohan Hovold <johan@kernel.org>
parent e5f48c81
......@@ -174,8 +174,11 @@ static void pl2303_set_break(struct usb_serial_port *port, bool enable);
enum pl2303_type {
TYPE_01, /* Type 0 and 1 (difference unknown) */
TYPE_HX, /* HX version of the pl2303 chip */
TYPE_HXN, /* HXN version of the pl2303 chip */
TYPE_HX,
TYPE_TA,
TYPE_TB,
TYPE_HXD,
TYPE_HXN,
TYPE_COUNT
};
......@@ -206,6 +209,15 @@ static const struct pl2303_type_data pl2303_type_data[TYPE_COUNT] = {
.no_autoxonxoff = true,
},
[TYPE_HX] = {
.max_baud_rate = 6000000,
},
[TYPE_TA] = {
.max_baud_rate = 6000000,
},
[TYPE_TB] = {
.max_baud_rate = 12000000,
},
[TYPE_HXD] = {
.max_baud_rate = 12000000,
},
[TYPE_HXN] = {
......@@ -362,9 +374,10 @@ static int pl2303_calc_num_ports(struct usb_serial *serial,
return 1;
}
static enum pl2303_type pl2303_detect_type(struct usb_serial *serial)
static int pl2303_detect_type(struct usb_serial *serial)
{
struct usb_device_descriptor *desc = &serial->dev->descriptor;
u16 bcdDevice, bcdUSB;
int ret;
u8 buf;
......@@ -391,7 +404,24 @@ static enum pl2303_type pl2303_detect_type(struct usb_serial *serial)
if (ret)
return TYPE_HXN;
return TYPE_HX;
bcdDevice = le16_to_cpu(desc->bcdDevice);
bcdUSB = le16_to_cpu(desc->bcdUSB);
switch (bcdDevice) {
case 0x300:
if (bcdUSB == 0x200)
return TYPE_TA;
return TYPE_HX;
case 0x400:
return TYPE_HXD;
case 0x500:
return TYPE_TB;
}
dev_err(&serial->interface->dev,
"unknown device type, please report to linux-usb@vger.kernel.org\n");
return -ENODEV;
}
static int pl2303_startup(struct usb_serial *serial)
......@@ -399,15 +429,19 @@ static int pl2303_startup(struct usb_serial *serial)
struct pl2303_serial_private *spriv;
enum pl2303_type type;
unsigned char *buf;
int ret;
ret = pl2303_detect_type(serial);
if (ret < 0)
return ret;
type = ret;
dev_dbg(&serial->interface->dev, "device type: %d\n", type);
spriv = kzalloc(sizeof(*spriv), GFP_KERNEL);
if (!spriv)
return -ENOMEM;
type = pl2303_detect_type(serial);
dev_dbg(&serial->interface->dev, "device type: %d\n", type);
spriv->type = &pl2303_type_data[type];
spriv->quirks = (unsigned long)usb_get_serial_data(serial);
spriv->quirks |= spriv->type->quirks;
......
Supports Markdown
0% or .
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment