Commit 9cfe1276 authored by Geoffrey D. Bennett's avatar Geoffrey D. Bennett Committed by Takashi Iwai
Browse files

ALSA: usb-audio: scarlett2: Label 18i8 Gen 3 line outputs correctly



The 18i8 Gen 3 analogue 7/8 outputs are identified as line 3/4 on the
rear of the unit. Add support for remapping the channel numbers to
match the labelling.

Signed-off-by: default avatarGeoffrey D. Bennett <g@b4.vu>
Link: https://lore.kernel.org/r/461acb911509e60e9ab48109ece3bbadae7440c8.1624379707.git.g@b4.vu


Signed-off-by: default avatarTakashi Iwai <tiwai@suse.de>
parent 6ef9fa4a
......@@ -344,6 +344,12 @@ struct scarlett2_device_info {
*/
u8 direct_monitor;
/* remap analogue outputs; 18i8 Gen 3 has "line 3/4" connected
* internally to the analogue 7/8 outputs
*/
u8 line_out_remap_enable;
u8 line_out_remap[SCARLETT2_ANALOGUE_MAX];
/* additional description for the line out volume controls */
const char * const line_out_descrs[SCARLETT2_ANALOGUE_MAX];
......@@ -684,15 +690,18 @@ static const struct scarlett2_device_info s18i8_gen3_info = {
.phantom_count = 2,
.inputs_per_phantom = 2,
.line_out_remap_enable = 1,
.line_out_remap = { 0, 1, 6, 7, 2, 3, 4, 5 },
.line_out_descrs = {
"Monitor L",
"Monitor R",
"Alt Monitor L",
"Alt Monitor R",
"Headphones 1 L",
"Headphones 1 R",
"Headphones 2 L",
"Headphones 2 R",
"Alt Monitor L",
"Alt Monitor R",
},
.port_count = {
......@@ -1716,13 +1725,22 @@ static int scarlett2_master_volume_ctl_get(struct snd_kcontrol *kctl,
return 0;
}
static int line_out_remap(struct scarlett2_data *private, int index)
{
const struct scarlett2_device_info *info = private->info;
if (!info->line_out_remap_enable)
return index;
return info->line_out_remap[index];
}
static int scarlett2_volume_ctl_get(struct snd_kcontrol *kctl,
struct snd_ctl_elem_value *ucontrol)
{
struct usb_mixer_elem_info *elem = kctl->private_data;
struct usb_mixer_interface *mixer = elem->head.mixer;
struct scarlett2_data *private = mixer->private_data;
int index = elem->control;
int index = line_out_remap(private, elem->control);
mutex_lock(&private->data_mutex);
if (private->vol_updated)
......@@ -1739,7 +1757,7 @@ static int scarlett2_volume_ctl_put(struct snd_kcontrol *kctl,
struct usb_mixer_elem_info *elem = kctl->private_data;
struct usb_mixer_interface *mixer = elem->head.mixer;
struct scarlett2_data *private = mixer->private_data;
int index = elem->control;
int index = line_out_remap(private, elem->control);
int oval, val, err = 0;
mutex_lock(&private->data_mutex);
......@@ -1795,7 +1813,7 @@ static int scarlett2_mute_ctl_get(struct snd_kcontrol *kctl,
{
struct usb_mixer_elem_info *elem = kctl->private_data;
struct scarlett2_data *private = elem->head.mixer->private_data;
int index = elem->control;
int index = line_out_remap(private, elem->control);
ucontrol->value.integer.value[0] = private->mute_switch[index];
return 0;
......@@ -1807,7 +1825,7 @@ static int scarlett2_mute_ctl_put(struct snd_kcontrol *kctl,
struct usb_mixer_elem_info *elem = kctl->private_data;
struct usb_mixer_interface *mixer = elem->head.mixer;
struct scarlett2_data *private = mixer->private_data;
int index = elem->control;
int index = line_out_remap(private, elem->control);
int oval, val, err = 0;
mutex_lock(&private->data_mutex);
......@@ -1854,9 +1872,9 @@ static int scarlett2_sw_hw_enum_ctl_get(struct snd_kcontrol *kctl,
{
struct usb_mixer_elem_info *elem = kctl->private_data;
struct scarlett2_data *private = elem->head.mixer->private_data;
int index = line_out_remap(private, elem->control);
ucontrol->value.enumerated.item[0] =
private->vol_sw_hw_switch[elem->control];
ucontrol->value.enumerated.item[0] = private->vol_sw_hw_switch[index];
return 0;
}
......@@ -1892,8 +1910,8 @@ static int scarlett2_sw_hw_enum_ctl_put(struct snd_kcontrol *kctl,
struct usb_mixer_elem_info *elem = kctl->private_data;
struct usb_mixer_interface *mixer = elem->head.mixer;
struct scarlett2_data *private = mixer->private_data;
int index = elem->control;
int ctl_index = elem->control;
int index = line_out_remap(private, ctl_index);
int oval, val, err = 0;
mutex_lock(&private->data_mutex);
......@@ -1909,7 +1927,7 @@ static int scarlett2_sw_hw_enum_ctl_put(struct snd_kcontrol *kctl,
/* Change access mode to RO (hardware controlled volume)
* or RW (software controlled volume)
*/
scarlett2_vol_ctl_set_writable(mixer, index, !val);
scarlett2_vol_ctl_set_writable(mixer, ctl_index, !val);
/* Reset volume/mute to master volume/mute */
private->vol[index] = private->master_vol;
......@@ -2441,13 +2459,16 @@ static int scarlett2_dim_mute_ctl_put(struct snd_kcontrol *kctl,
err = 1;
if (index == SCARLETT2_BUTTON_MUTE)
for (i = 0; i < num_line_out; i++)
if (private->vol_sw_hw_switch[i]) {
private->mute_switch[i] = val;
for (i = 0; i < num_line_out; i++) {
int line_index = line_out_remap(private, i);
if (private->vol_sw_hw_switch[line_index]) {
private->mute_switch[line_index] = val;
snd_ctl_notify(mixer->chip->card,
SNDRV_CTL_EVENT_MASK_INFO,
&private->mute_ctls[i]->id);
}
}
unlock:
mutex_unlock(&private->data_mutex);
......@@ -2486,6 +2507,7 @@ static int scarlett2_add_line_out_ctls(struct usb_mixer_interface *mixer)
/* Add volume controls */
for (i = 0; i < num_line_out; i++) {
int index = line_out_remap(private, i);
/* Fader */
if (info->line_out_descrs[i])
......@@ -2516,7 +2538,7 @@ static int scarlett2_add_line_out_ctls(struct usb_mixer_interface *mixer)
/* Make the fader and mute controls read-only if the
* SW/HW switch is set to HW
*/
if (private->vol_sw_hw_switch[i])
if (private->vol_sw_hw_switch[index])
scarlett2_vol_ctl_set_writable(mixer, i, 0);
/* SW/HW Switch */
......@@ -2765,8 +2787,16 @@ static int scarlett2_mux_src_enum_ctl_get(struct snd_kcontrol *kctl,
{
struct usb_mixer_elem_info *elem = kctl->private_data;
struct scarlett2_data *private = elem->head.mixer->private_data;
const struct scarlett2_device_info *info = private->info;
const int (*port_count)[SCARLETT2_PORT_DIRNS] = info->port_count;
int line_out_count =
port_count[SCARLETT2_PORT_TYPE_ANALOGUE][SCARLETT2_PORT_OUT];
int index = elem->control;
if (index < line_out_count)
index = line_out_remap(private, index);
ucontrol->value.enumerated.item[0] = private->mux[elem->control];
ucontrol->value.enumerated.item[0] = private->mux[index];
return 0;
}
......@@ -2776,9 +2806,16 @@ static int scarlett2_mux_src_enum_ctl_put(struct snd_kcontrol *kctl,
struct usb_mixer_elem_info *elem = kctl->private_data;
struct usb_mixer_interface *mixer = elem->head.mixer;
struct scarlett2_data *private = mixer->private_data;
const struct scarlett2_device_info *info = private->info;
const int (*port_count)[SCARLETT2_PORT_DIRNS] = info->port_count;
int line_out_count =
port_count[SCARLETT2_PORT_TYPE_ANALOGUE][SCARLETT2_PORT_OUT];
int index = elem->control;
int oval, val, err = 0;
if (index < line_out_count)
index = line_out_remap(private, index);
mutex_lock(&private->data_mutex);
oval = private->mux[index];
......@@ -3179,6 +3216,7 @@ static void scarlett2_notify_sync(
static void scarlett2_notify_monitor(
struct usb_mixer_interface *mixer)
{
struct snd_card *card = mixer->chip->card;
struct scarlett2_data *private = mixer->private_data;
const struct scarlett2_device_info *info = private->info;
const int (*port_count)[SCARLETT2_PORT_DIRNS] = info->port_count;
......@@ -3195,12 +3233,10 @@ static void scarlett2_notify_monitor(
snd_ctl_notify(mixer->chip->card, SNDRV_CTL_EVENT_MASK_VALUE,
&private->master_vol_ctl->id);
for (i = 0; i < num_line_out; i++) {
if (!private->vol_sw_hw_switch[i])
continue;
snd_ctl_notify(mixer->chip->card, SNDRV_CTL_EVENT_MASK_VALUE,
&private->vol_ctls[i]->id);
}
for (i = 0; i < num_line_out; i++)
if (private->vol_sw_hw_switch[line_out_remap(private, i)])
snd_ctl_notify(card, SNDRV_CTL_EVENT_MASK_VALUE,
&private->vol_ctls[i]->id);
}
/* Notify on dim/mute change */
......@@ -3225,7 +3261,7 @@ static void scarlett2_notify_dim_mute(
&private->dim_mute_ctls[i]->id);
for (i = 0; i < num_line_out; i++)
if (private->vol_sw_hw_switch[i])
if (private->vol_sw_hw_switch[line_out_remap(private, i)])
snd_ctl_notify(card, SNDRV_CTL_EVENT_MASK_VALUE,
&private->mute_ctls[i]->id);
}
......
Supports Markdown
0% or .
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment