Commit a93455e1 authored by Thomas Pugliese's avatar Thomas Pugliese Committed by Takashi Iwai
Browse files

ALSA: usb: use multiple packets per urb for Wireless USB inbound audio



For Wireless USB audio devices, use multiple isoc packets per URB for
inbound endpoints with a datainterval < 5.  This allows the WUSB host
controller to take advantage of bursting to service endpoints whose
logical polling interval is less than the 4ms minimum polling interval
limit in WUSB.
Signed-off-by: default avatarThomas Pugliese <thomas.pugliese@gmail.com>
Signed-off-by: default avatarTakashi Iwai <tiwai@suse.de>
parent 2fd3f170
......@@ -636,8 +636,22 @@ static int data_ep_set_params(struct snd_usb_endpoint *ep,
if (usb_pipein(ep->pipe) ||
snd_usb_endpoint_implicit_feedback_sink(ep)) {
urb_packs = packs_per_ms;
/*
* Wireless devices can poll at a max rate of once per 4ms.
* For dataintervals less than 5, increase the packet count to
* allow the host controller to use bursting to fill in the
* gaps.
*/
if (snd_usb_get_speed(ep->chip->dev) == USB_SPEED_WIRELESS) {
int interval = ep->datainterval;
while (interval < 5) {
urb_packs <<= 1;
++interval;
}
}
/* make capture URBs <= 1 ms and smaller than a period */
urb_packs = min(max_packs_per_urb, packs_per_ms);
urb_packs = min(max_packs_per_urb, urb_packs);
while (urb_packs > 1 && urb_packs * maxsize >= period_bytes)
urb_packs >>= 1;
ep->nurbs = MAX_URBS;
......
Supports Markdown
0% or .
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment