Commit c1accaa2 authored by Mauro Carvalho Chehab's avatar Mauro Carvalho Chehab
Browse files

V4L/DVB (6252): Adapt drivers to use the newer videobuf modules



PCI-dependent videobuf_foo methods were renamed as videobuf_pci_foo.

Also, videobuf_dmabuf is now part of videobuf-dma-sg private struct.
So, to access it, a subroutine call is needed.

This patch renames all occurences of those function calls to be
consistent with the video-buf split.
Signed-off-by: default avatarMauro Carvalho Chehab <mchehab@infradead.org>
http://thread.gmane.org/gmane.comp.video.video4linux/34978/focus=34981

Reviewed-by: default avatarRicardo Cerqueira <v4l@cerqueira.org>
parent 7a7d9a89
......@@ -150,7 +150,7 @@ Some very frequently asked questions about linuxtv-dvb
- saa7146_vv: SAA7146 video and vbi functions. These are only needed
for full-featured cards.
- video-buf: capture helper module for the saa7146_vv driver. This
- videobuf-dma-sg: capture helper module for the saa7146_vv driver. This
one is responsible to handle capture buffers.
- dvb-ttpci: The main driver for AV7110 based, full-featured
......
......@@ -126,8 +126,12 @@ config TUNER_SIMPLE
endif # VIDEO_TUNER_CUSTOMIZE
config VIDEO_BUF
config VIDEOBUF_GEN
tristate
config VIDEOBUF_DMA_SG
depends on PCI
select VIDEOBUF_GEN
tristate
config VIDEO_BUF_DVB
......
......@@ -5,5 +5,5 @@ config VIDEO_SAA7146
config VIDEO_SAA7146_VV
tristate
depends on VIDEO_DEV
select VIDEO_BUF
select VIDEOBUF_DMA_SG
select VIDEO_SAA7146
......@@ -100,7 +100,7 @@ int saa7146_wait_for_debi_done(struct saa7146_dev *dev, int nobusyloop)
* general helper functions
****************************************************************************/
/* this is videobuf_vmalloc_to_sg() from video-buf.c
/* this is videobuf_vmalloc_to_sg() from videobuf-dma-sg.c
make sure virt has been allocated with vmalloc_32(), otherwise the BUG()
may be triggered on highmem machines */
static struct scatterlist* vmalloc_to_sg(unsigned char *virt, int nr_pages)
......
......@@ -53,13 +53,14 @@ void saa7146_res_free(struct saa7146_fh *fh, unsigned int bits)
void saa7146_dma_free(struct saa7146_dev *dev,struct videobuf_queue *q,
struct saa7146_buf *buf)
{
struct videobuf_dmabuf *dma=videobuf_to_dma(&buf->vb);
DEB_EE(("dev:%p, buf:%p\n",dev,buf));
BUG_ON(in_interrupt());
videobuf_waiton(&buf->vb,0,0);
videobuf_dma_unmap(q, &buf->vb.dma);
videobuf_dma_free(&buf->vb.dma);
videobuf_dma_unmap(q, dma);
videobuf_dma_free(dma);
buf->vb.state = STATE_NEEDS_INIT;
}
......
......@@ -165,7 +165,7 @@ static void saa7146_set_vbi_capture(struct saa7146_dev *dev, struct saa7146_buf
/* we don't wait here for the first field anymore. this is different from the video
capture and might cause that the first buffer is only half filled (with only
one field). but since this is some sort of streaming data, this is not that negative.
but by doing this, we can use the whole engine from video-buf.c... */
but by doing this, we can use the whole engine from videobuf-dma-sg.c... */
/*
WRITE_RPS1(CMD_PAUSE | CMD_OAN | CMD_SIG1 | e_wait);
......@@ -239,6 +239,8 @@ static int buffer_prepare(struct videobuf_queue *q, struct videobuf_buffer *vb,e
saa7146_dma_free(dev,q,buf);
if (STATE_NEEDS_INIT == buf->vb.state) {
struct videobuf_dmabuf *dma=videobuf_to_dma(&buf->vb);
buf->vb.width = llength;
buf->vb.height = lines;
buf->vb.size = size;
......@@ -250,7 +252,8 @@ static int buffer_prepare(struct videobuf_queue *q, struct videobuf_buffer *vb,e
err = videobuf_iolock(q,&buf->vb, NULL);
if (err)
goto oops;
err = saa7146_pgtable_build_single(dev->pci, &buf->pt[2], buf->vb.dma.sglist, buf->vb.dma.sglen);
err = saa7146_pgtable_build_single(dev->pci, &buf->pt[2],
dma->sglist, dma->sglen);
if (0 != err)
return err;
}
......@@ -404,7 +407,7 @@ static int vbi_open(struct saa7146_dev *dev, struct file *file)
fh->vbi_fmt.start[1] = 312;
fh->vbi_fmt.count[1] = 16;
videobuf_queue_init(&fh->vbi_q, &vbi_qops,
videobuf_queue_pci_init(&fh->vbi_q, &vbi_qops,
dev->pci, &dev->slock,
V4L2_BUF_TYPE_VBI_CAPTURE,
V4L2_FIELD_SEQ_TB, // FIXME: does this really work?
......
......@@ -594,8 +594,9 @@ static int set_control(struct saa7146_fh *fh, struct v4l2_control *c)
static int saa7146_pgtable_build(struct saa7146_dev *dev, struct saa7146_buf *buf)
{
struct pci_dev *pci = dev->pci;
struct scatterlist *list = buf->vb.dma.sglist;
int length = buf->vb.dma.sglen;
struct videobuf_dmabuf *dma=videobuf_to_dma(&buf->vb);
struct scatterlist *list = dma->sglist;
int length = dma->sglen;
struct saa7146_format *sfmt = format_by_fourcc(dev,buf->fmt->pixelformat);
DEB_EE(("dev:%p, buf:%p, sg_len:%d\n",dev,buf,length));
......@@ -655,7 +656,7 @@ static int saa7146_pgtable_build(struct saa7146_dev *dev, struct saa7146_buf *bu
/* if we have a user buffer, the first page may not be
aligned to a page boundary. */
pt1->offset = buf->vb.dma.sglist->offset;
pt1->offset = list->offset;
pt2->offset = pt1->offset+o1;
pt3->offset = pt1->offset+o2;
......@@ -1411,7 +1412,7 @@ static int video_open(struct saa7146_dev *dev, struct file *file)
sfmt = format_by_fourcc(dev,fh->video_fmt.pixelformat);
fh->video_fmt.sizeimage = (fh->video_fmt.width * fh->video_fmt.height * sfmt->depth)/8;
videobuf_queue_init(&fh->video_q, &video_qops,
videobuf_queue_pci_init(&fh->video_q, &video_qops,
dev->pci, &dev->slock,
V4L2_BUF_TYPE_VIDEO_CAPTURE,
V4L2_FIELD_INTERLACED,
......
......@@ -364,7 +364,7 @@ endmenu # encoder / decoder chips
config VIDEO_VIVI
tristate "Virtual Video Driver"
depends on VIDEO_V4L2 && !SPARC32 && !SPARC64 && PCI
select VIDEO_BUF
select VIDEOBUF_DMA_SG
default n
---help---
Enables a virtual video driver. This device shows a color bar
......
......@@ -87,7 +87,8 @@ obj-$(CONFIG_TUNER_TDA8290) += tda8290.o
obj-$(CONFIG_TUNER_TEA5767) += tea5767.o
obj-$(CONFIG_TUNER_TEA5761) += tea5761.o
obj-$(CONFIG_VIDEO_BUF) += video-buf.o
obj-$(CONFIG_VIDEOBUF_GEN) += videobuf-core.o
obj-$(CONFIG_VIDEOBUF_DMA_SG) += videobuf-dma-sg.o
obj-$(CONFIG_VIDEO_BUF_DVB) += video-buf-dvb.o
obj-$(CONFIG_VIDEO_BTCX) += btcx-risc.o
obj-$(CONFIG_VIDEO_TVEEPROM) += tveeprom.o
......
......@@ -4,7 +4,7 @@ config VIDEO_BT848
select I2C_ALGOBIT
select FW_LOADER
select VIDEO_BTCX
select VIDEO_BUF
select VIDEOBUF_DMA_SG
select VIDEO_IR
select VIDEO_TUNER
select VIDEO_TVEEPROM
......
......@@ -2582,7 +2582,7 @@ static int setup_window(struct bttv_fh *fh, struct bttv *btv,
if (check_btres(fh, RESOURCE_OVERLAY)) {
struct bttv_buffer *new;
new = videobuf_alloc(sizeof(*new));
new = videobuf_pci_alloc(sizeof(*new));
new->crop = btv->crop[!!fh->do_crop].rect;
bttv_overlay_risc(btv, &fh->ov, fh->ovfmt, new);
retval = bttv_switch_overlay(btv,fh,new);
......@@ -3048,7 +3048,7 @@ static int bttv_do_ioctl(struct inode *inode, struct file *file,
mutex_lock(&fh->cap.lock);
if (*on) {
fh->ov.tvnorm = btv->tvnorm;
new = videobuf_alloc(sizeof(*new));
new = videobuf_pci_alloc(sizeof(*new));
new->crop = btv->crop[!!fh->do_crop].rect;
bttv_overlay_risc(btv, &fh->ov, fh->ovfmt, new);
} else {
......@@ -3141,9 +3141,12 @@ static int bttv_do_ioctl(struct inode *inode, struct file *file,
retval = -EIO;
/* fall through */
case STATE_DONE:
videobuf_dma_sync(&fh->cap,&buf->vb.dma);
{
struct videobuf_dmabuf *dma=videobuf_to_dma(&buf->vb);
videobuf_dma_sync(&fh->cap,dma);
bttv_dma_free(&fh->cap,btv,buf);
break;
}
default:
retval = -EINVAL;
break;
......@@ -3337,7 +3340,7 @@ static int bttv_do_ioctl(struct inode *inode, struct file *file,
if (check_btres(fh, RESOURCE_OVERLAY)) {
struct bttv_buffer *new;
new = videobuf_alloc(sizeof(*new));
new = videobuf_pci_alloc(sizeof(*new));
new->crop = btv->crop[!!fh->do_crop].rect;
bttv_overlay_risc(btv,&fh->ov,fh->ovfmt,new);
retval = bttv_switch_overlay(btv,fh,new);
......@@ -3696,7 +3699,7 @@ static unsigned int bttv_poll(struct file *file, poll_table *wait)
mutex_unlock(&fh->cap.lock);
return POLLERR;
}
fh->cap.read_buf = videobuf_alloc(fh->cap.msize);
fh->cap.read_buf = videobuf_pci_alloc(fh->cap.msize);
if (NULL == fh->cap.read_buf) {
mutex_unlock(&fh->cap.lock);
return POLLERR;
......@@ -3763,13 +3766,13 @@ static int bttv_open(struct inode *inode, struct file *file)
fh->ov.setup_ok = 0;
v4l2_prio_open(&btv->prio,&fh->prio);
videobuf_queue_init(&fh->cap, &bttv_video_qops,
videobuf_queue_pci_init(&fh->cap, &bttv_video_qops,
btv->c.pci, &btv->s_lock,
V4L2_BUF_TYPE_VIDEO_CAPTURE,
V4L2_FIELD_INTERLACED,
sizeof(struct bttv_buffer),
fh);
videobuf_queue_init(&fh->vbi, &bttv_vbi_qops,
videobuf_queue_pci_init(&fh->vbi, &bttv_vbi_qops,
btv->c.pci, &btv->s_lock,
V4L2_BUF_TYPE_VBI_CAPTURE,
V4L2_FIELD_SEQ_TB,
......
......@@ -574,10 +574,12 @@ bttv_risc_hook(struct bttv *btv, int slot, struct btcx_riscmem *risc,
void
bttv_dma_free(struct videobuf_queue *q,struct bttv *btv, struct bttv_buffer *buf)
{
struct videobuf_dmabuf *dma=videobuf_to_dma(&buf->vb);
BUG_ON(in_interrupt());
videobuf_waiton(&buf->vb,0,0);
videobuf_dma_unmap(q, &buf->vb.dma);
videobuf_dma_free(&buf->vb.dma);
videobuf_dma_unmap(q, dma);
videobuf_dma_free(dma);
btcx_riscmem_free(btv->c.pci,&buf->bottom);
btcx_riscmem_free(btv->c.pci,&buf->top);
buf->vb.state = STATE_NEEDS_INIT;
......@@ -699,6 +701,7 @@ int
bttv_buffer_risc(struct bttv *btv, struct bttv_buffer *buf)
{
const struct bttv_tvnorm *tvnorm = bttv_tvnorms + buf->tvnorm;
struct videobuf_dmabuf *dma=videobuf_to_dma(&buf->vb);
dprintk(KERN_DEBUG
"bttv%d: buffer field: %s format: %s size: %dx%d\n",
......@@ -716,25 +719,25 @@ bttv_buffer_risc(struct bttv *btv, struct bttv_buffer *buf)
switch (buf->vb.field) {
case V4L2_FIELD_TOP:
bttv_risc_packed(btv,&buf->top,buf->vb.dma.sglist,
bttv_risc_packed(btv,&buf->top,dma->sglist,
/* offset */ 0,bpl,
/* padding */ 0,/* skip_lines */ 0,
buf->vb.height);
break;
case V4L2_FIELD_BOTTOM:
bttv_risc_packed(btv,&buf->bottom,buf->vb.dma.sglist,
bttv_risc_packed(btv,&buf->bottom,dma->sglist,
0,bpl,0,0,buf->vb.height);
break;
case V4L2_FIELD_INTERLACED:
bttv_risc_packed(btv,&buf->top,buf->vb.dma.sglist,
bttv_risc_packed(btv,&buf->top,dma->sglist,
0,bpl,bpl,0,buf->vb.height >> 1);
bttv_risc_packed(btv,&buf->bottom,buf->vb.dma.sglist,
bttv_risc_packed(btv,&buf->bottom,dma->sglist,
bpl,bpl,bpl,0,buf->vb.height >> 1);
break;
case V4L2_FIELD_SEQ_TB:
bttv_risc_packed(btv,&buf->top,buf->vb.dma.sglist,
bttv_risc_packed(btv,&buf->top,dma->sglist,
0,bpl,0,0,buf->vb.height >> 1);
bttv_risc_packed(btv,&buf->bottom,buf->vb.dma.sglist,
bttv_risc_packed(btv,&buf->bottom,dma->sglist,
bpf,bpl,0,0,buf->vb.height >> 1);
break;
default:
......@@ -767,7 +770,7 @@ bttv_buffer_risc(struct bttv *btv, struct bttv_buffer *buf)
bttv_calc_geo(btv,&buf->geo,buf->vb.width,
buf->vb.height,/* both_fields */ 0,
tvnorm,&buf->crop);
bttv_risc_planar(btv, &buf->top, buf->vb.dma.sglist,
bttv_risc_planar(btv, &buf->top, dma->sglist,
0,buf->vb.width,0,buf->vb.height,
uoffset,voffset,buf->fmt->hshift,
buf->fmt->vshift,0);
......@@ -776,7 +779,7 @@ bttv_buffer_risc(struct bttv *btv, struct bttv_buffer *buf)
bttv_calc_geo(btv,&buf->geo,buf->vb.width,
buf->vb.height,0,
tvnorm,&buf->crop);
bttv_risc_planar(btv, &buf->bottom, buf->vb.dma.sglist,
bttv_risc_planar(btv, &buf->bottom, dma->sglist,
0,buf->vb.width,0,buf->vb.height,
uoffset,voffset,buf->fmt->hshift,
buf->fmt->vshift,0);
......@@ -789,14 +792,14 @@ bttv_buffer_risc(struct bttv *btv, struct bttv_buffer *buf)
ypadding = buf->vb.width;
cpadding = buf->vb.width >> buf->fmt->hshift;
bttv_risc_planar(btv,&buf->top,
buf->vb.dma.sglist,
dma->sglist,
0,buf->vb.width,ypadding,lines,
uoffset,voffset,
buf->fmt->hshift,
buf->fmt->vshift,
cpadding);
bttv_risc_planar(btv,&buf->bottom,
buf->vb.dma.sglist,
dma->sglist,
ypadding,buf->vb.width,ypadding,lines,
uoffset+cpadding,
voffset+cpadding,
......@@ -812,7 +815,7 @@ bttv_buffer_risc(struct bttv *btv, struct bttv_buffer *buf)
ypadding = buf->vb.width;
cpadding = buf->vb.width >> buf->fmt->hshift;
bttv_risc_planar(btv,&buf->top,
buf->vb.dma.sglist,
dma->sglist,
0,buf->vb.width,0,lines,
uoffset >> 1,
voffset >> 1,
......@@ -820,7 +823,7 @@ bttv_buffer_risc(struct bttv *btv, struct bttv_buffer *buf)
buf->fmt->vshift,
0);
bttv_risc_planar(btv,&buf->bottom,
buf->vb.dma.sglist,
dma->sglist,
lines * ypadding,buf->vb.width,0,lines,
lines * ypadding + (uoffset >> 1),
lines * ypadding + (voffset >> 1),
......@@ -839,10 +842,10 @@ bttv_buffer_risc(struct bttv *btv, struct bttv_buffer *buf)
buf->vb.field = V4L2_FIELD_SEQ_TB;
bttv_calc_geo(btv,&buf->geo,tvnorm->swidth,tvnorm->sheight,
1,tvnorm,&buf->crop);
bttv_risc_packed(btv, &buf->top, buf->vb.dma.sglist,
bttv_risc_packed(btv, &buf->top, dma->sglist,
/* offset */ 0, RAW_BPL, /* padding */ 0,
/* skip_lines */ 0, RAW_LINES);
bttv_risc_packed(btv, &buf->bottom, buf->vb.dma.sglist,
bttv_risc_packed(btv, &buf->bottom, dma->sglist,
buf->vb.size/2 , RAW_BPL, 0, 0, RAW_LINES);
}
......
......@@ -150,13 +150,14 @@ static int vbi_buffer_prepare(struct videobuf_queue *q,
if (redo_dma_risc) {
unsigned int bpl, padding, offset;
struct videobuf_dmabuf *dma=videobuf_to_dma(&buf->vb);
bpl = 2044; /* max. vbipack */
padding = VBI_BPL - bpl;
if (fh->vbi_fmt.fmt.count[0] > 0) {
rc = bttv_risc_packed(btv, &buf->top,
buf->vb.dma.sglist,
dma->sglist,
/* offset */ 0, bpl,
padding, skip_lines0,
fh->vbi_fmt.fmt.count[0]);
......@@ -168,7 +169,7 @@ static int vbi_buffer_prepare(struct videobuf_queue *q,
offset = fh->vbi_fmt.fmt.count[0] * VBI_BPL;
rc = bttv_risc_packed(btv, &buf->bottom,
buf->vb.dma.sglist,
dma->sglist,
offset, bpl,
padding, skip_lines1,
fh->vbi_fmt.fmt.count[1]);
......
......@@ -41,7 +41,7 @@
#include <media/v4l2-common.h>
#include <linux/device.h>
#include <media/video-buf.h>
#include <media/videobuf-dma-sg.h>
#include <media/tuner.h>
#include <media/tveeprom.h>
#include <media/ir-common.h>
......
......@@ -1197,7 +1197,7 @@ static int cafe_setup_siobuf(struct cafe_camera *cam, int index)
buf->v4lbuf.field = V4L2_FIELD_NONE;
buf->v4lbuf.memory = V4L2_MEMORY_MMAP;
/*
* Offset: must be 32-bit even on a 64-bit system. video-buf
* Offset: must be 32-bit even on a 64-bit system. videobuf-dma-sg
* just uses the length times the index, but the spec warns
* against doing just that - vma merging problems. So we
* leave a gap between each pair of buffers.
......
......@@ -4,7 +4,7 @@ config VIDEO_CX88
select I2C_ALGOBIT
select FW_LOADER
select VIDEO_BTCX
select VIDEO_BUF
select VIDEOBUF_DMA_SG
select VIDEO_TUNER
select VIDEO_TVEEPROM
select VIDEO_IR
......
......@@ -72,7 +72,7 @@ struct cx88_audio_dev {
unsigned int period_size;
unsigned int num_periods;
struct videobuf_dmabuf dma_risc;
struct videobuf_dmabuf *dma_risc;
struct cx88_buffer *buf;
......@@ -282,11 +282,12 @@ static int dsp_buffer_free(snd_cx88_card_t *chip)
BUG_ON(!chip->dma_size);
dprintk(2,"Freeing buffer\n");
videobuf_pci_dma_unmap(chip->pci, &chip->dma_risc);
videobuf_dma_free(&chip->dma_risc);
videobuf_pci_dma_unmap(chip->pci, chip->dma_risc);
videobuf_dma_free(chip->dma_risc);
btcx_riscmem_free(chip->pci,&chip->buf->risc);
kfree(chip->buf);
chip->dma_risc = NULL;
chip->dma_size = 0;
return 0;
......@@ -366,6 +367,8 @@ static int snd_cx88_hw_params(struct snd_pcm_substream * substream,
struct snd_pcm_hw_params * hw_params)
{
snd_cx88_card_t *chip = snd_pcm_substream_chip(substream);
struct videobuf_dmabuf *dma;
struct cx88_buffer *buf;
int ret;
......@@ -381,7 +384,7 @@ static int snd_cx88_hw_params(struct snd_pcm_substream * substream,
BUG_ON(!chip->dma_size);
BUG_ON(chip->num_periods & (chip->num_periods-1));
buf = kzalloc(sizeof(*buf), GFP_KERNEL);
buf = videobuf_pci_alloc(sizeof(*buf));
if (NULL == buf)
return -ENOMEM;
......@@ -392,17 +395,18 @@ static int snd_cx88_hw_params(struct snd_pcm_substream * substream,
buf->vb.height = chip->num_periods;
buf->vb.size = chip->dma_size;
videobuf_dma_init(&buf->vb.dma);
ret = videobuf_dma_init_kernel(&buf->vb.dma, PCI_DMA_FROMDEVICE,
dma=videobuf_to_dma(&buf->vb);
videobuf_dma_init(dma);
ret = videobuf_dma_init_kernel(dma, PCI_DMA_FROMDEVICE,
(PAGE_ALIGN(buf->vb.size) >> PAGE_SHIFT));
if (ret < 0)
goto error;
ret = videobuf_pci_dma_map(chip->pci,&buf->vb.dma);
ret = videobuf_pci_dma_map(chip->pci,dma);
if (ret < 0)
goto error;
ret = cx88_risc_databuffer(chip->pci, &buf->risc, buf->vb.dma.sglist,
ret = cx88_risc_databuffer(chip->pci, &buf->risc, dma->sglist,
buf->vb.width, buf->vb.height, 1);
if (ret < 0)
goto error;
......@@ -414,9 +418,9 @@ static int snd_cx88_hw_params(struct snd_pcm_substream * substream,
buf->vb.state = STATE_PREPARED;
chip->buf = buf;
chip->dma_risc = buf->vb.dma;
chip->dma_risc = dma;
substream->runtime->dma_area = chip->dma_risc.vmalloc;
substream->runtime->dma_area = chip->dma_risc->vmalloc;
substream->runtime->dma_bytes = chip->dma_size;
substream->runtime->dma_addr = 0;
return 0;
......
......@@ -1111,7 +1111,7 @@ static int mpeg_open(struct inode *inode, struct file *file)
file->private_data = fh;
fh->dev = dev;
videobuf_queue_init(&fh->mpegq, &blackbird_qops,
videobuf_queue_pci_init(&fh->mpegq, &blackbird_qops,
dev->pci, &dev->slock,
V4L2_BUF_TYPE_VIDEO_CAPTURE,
V4L2_FIELD_INTERLACED,
......
......@@ -213,10 +213,12 @@ int cx88_risc_stopper(struct pci_dev *pci, struct btcx_riscmem *risc,
void
cx88_free_buffer(struct videobuf_queue *q, struct cx88_buffer *buf)
{
struct videobuf_dmabuf *dma=videobuf_to_dma(&buf->vb);
BUG_ON(in_interrupt());
videobuf_waiton(&buf->vb,0,0);
videobuf_dma_unmap(q, &buf->vb.dma);
videobuf_dma_free(&buf->vb.dma);
videobuf_dma_unmap(q, dma);
videobuf_dma_free(dma);
btcx_riscmem_free((struct pci_dev *)q->dev, &buf->risc);
buf->vb.state = STATE_NEEDS_INIT;
}
......
......@@ -710,7 +710,7 @@ static int cx8802_dvb_probe(struct cx8802_driver *drv)
/* dvb stuff */
printk(KERN_INFO "%s/2: cx2388x based DVB/ATSC card\n", core->name);
videobuf_queue_init(&dev->dvb.dvbq, &dvb_qops,
videobuf_queue_pci_init(&dev->dvb.dvbq, &dvb_qops,
dev->pci, &dev->slock,
V4L2_BUF_TYPE_VIDEO_CAPTURE,
V4L2_FIELD_TOP,
......
Supports Markdown
0% or .
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment