Also change all references from lzma to xz format.

Signed-off-by: Gerardo Exequiel Pozzi <vmlinuz386@yahoo.com.ar>

Signed-off-by: Gerardo Exequiel Pozzi <vmlinuz386@yahoo.com.ar>

Changed to work with recent cmdline_param() -> kernel_cmdline() change. (Gerardo)

Signed-off-by: Gerardo Exequiel Pozzi <vmlinuz386@yahoo.com.ar>

- Rename cmdline_param to kernel_cmdline
- Move to /etc/rc.d/functions.d where it belongs

This makes interactive installations over serial consoles possible with
nothing more than specifying the console= kernel parameter.

Changed inittab id "s0" -> "z0" to avoid conflict with line ttyS0. (Gerardo)

Signed-off-by: Gerardo Exequiel Pozzi <vmlinuz386@yahoo.com.ar>

Added missing agetty ttyS0 in the patch. (Gerardo)

Signed-off-by: Gerardo Exequiel Pozzi <vmlinuz386@yahoo.com.ar>

these options have no real disadvantages, but can provide lots of
useful info when the user runs into trouble, which still happens enough

Signed-off-by: Gerardo Exequiel Pozzi <vmlinuz386@yahoo.com.ar>

Signed-off-by: Gerardo Exequiel Pozzi <vmlinuz386@yahoo.com.ar>

Just set the default gzip.

Signed-off-by: Gerardo Exequiel Pozzi <vmlinuz386@yahoo.com.ar>

Edited from original commit to adapt them to install_dir scheme.

Signed-off-by: Gerardo Exequiel Pozzi <vmlinuz386@yahoo.com.ar>

Signed-off-by: Gerardo Exequiel Pozzi <vmlinuz386@yahoo.com.ar>

Add two parameters:

img_dev=/dev/sdNM
   where /dev/sdNM is the device where .iso is located.
img_loop=/path/to/arch.iso
   where /path/to/arch.iso is the full path of the .iso in the device img_dev.

Original idea from Baurzhan Muftakhidinov.

Signed-off-by: Gerardo Exequiel Pozzi <vmlinuz386@yahoo.com.ar>

Is not anymore on repos.

Signed-off-by: Gerardo Exequiel Pozzi <vmlinuz386@yahoo.com.ar>

Signed-off-by: Gerardo Exequiel Pozzi <vmlinuz386@yahoo.com.ar>

/syslinux/         syslinux only files
/arch/boot/        memtest86+ + splash.png + ...
/arch/boot/$ARCH/  Linux + initramfs
/arch/             isomounts
/arch/$ARCH/       *.sqfs

Signed-off-by: Gerardo Exequiel Pozzi <vmlinuz386@yahoo.com.ar>

Unify with dir layout of -dual images.

Signed-off-by: Gerardo Exequiel Pozzi <vmlinuz386@yahoo.com.ar>

This is how ISO will look now:
/syslinux          only syslinux related files (syslinux.cfg, *.c32, etc)
/arch/             isomounts
/arch/any          *.sqfs only on -T full or -T split
/arch/i686         *.sqfs
/arch/x86_64       *.sqfs
/arch/boot         Memtest86+ + other files for early boot stage
/arch/boot/i686    Linux + initramfs
/arch/boot/x86_64  Linux + initramfs

Signed-off-by: Gerardo Exequiel Pozzi <vmlinuz386@yahoo.com.ar>

This is how ISO will look now:
/syslinux    only syslinux related files (syslinux.cfg, *.c32, etc)
/arch/       isomounts + *.sqfs images
/arch/boot/  Linux + initramfs + Memtest86+ + other files for early boot stage

Signed-off-by: Gerardo Exequiel Pozzi <vmlinuz386@yahoo.com.ar>

-D <install_dir> allow to select install directory on target media
                  defaults to "arch".

There is a new %INSTALL_DIR% macro for syslinux.cfg.

This is how ISO will look now:
/syslinux    only syslinux related files (syslinux.cfg, *.c32, etc)
/arch/       isomounts + *.sqfs images
/arch/boot/  Linux + initramfs + Memtest86+ + other files for early boot stage

Signed-off-by: Gerardo Exequiel Pozzi <vmlinuz386@yahoo.com.ar>

This allow to have syslinux.cfg splited in multiple .cfg files.

Curretly:   -S /path/to/syslinux.cfg
Changed to: -S /path/where/are/syslinux.cfgs.files/

Signed-off-by: Gerardo Exequiel Pozzi <vmlinuz386@yahoo.com.ar>

Add a note about supported status in Linux versions.
Needs squashfs-tools-4.1 (now on extra).

Signed-off-by: Gerardo Exequiel Pozzi <vmlinuz386@yahoo.com.ar>

Add a note about supported status in Linux versions.
Needs squashfs-tools-4.1 (now on extra).

Signed-off-by: Gerardo Exequiel Pozzi <vmlinuz386@yahoo.com.ar>

syslinux's KERNEL command tries to autodetect the type of the kernel
by looking at the file's extension. This is unsafe, use the explicit
versions instead:
LINUX - for Linux kernels (memtest is booted like a Linux kernel, too)
COM32 - for COM32 modules
COMBOOT - for comboot modules (only poweroff.com right now)
See http://syslinux.zytor.com/wiki/index.php/SYSLINUX#KERNEL_file

This was wrong and can never have worked. Fix it.

Newer nbd-server uses config file instead of parameters via cmd line (deprecated).
Also does not use a fixed port (oldstyle).

Sample nbd-server.conf that works with this change:

-- CUT HERE --
[generic]
[archiso]
    readonly = true
    exportname = /tmp/archlinux.iso
-- CUT HERE --

Signed-off-by: Gerardo Exequiel Pozzi <vmlinuz386@yahoo.com.ar>

Requested at FS#21040

Signed-off-by: Gerardo Exequiel Pozzi <vmlinuz386@yahoo.com.ar>

Some modern HDD come with agressive APM settings by default,
not only "green ready" drive also "high end" drives.

Adding hdparm so users can change/disable hdd settings (mostly -B -S -M).

Signed-off-by: Gerardo Exequiel Pozzi <vmlinuz386@yahoo.com.ar>

Signed-off-by: Gerardo Exequiel Pozzi <vmlinuz386@yahoo.com.ar>

linux-firmware is already installed as dep of kernel26

Signed-off-by: Gerardo Exequiel Pozzi <vmlinuz386@yahoo.com.ar>

The name of the bootloader is syslinux, while isolinux is just one
of many components. isolinux.bin now also accepts syslinux.cfg
as a configuration file name (as do all other loaders).

Thus, rename the isolinux/ folder to syslinux/, and rename
isolinux.cfg to syslinux.cfg. The only occurrence of 'isolinux'
is now the actual loader file 'isolinux.bin'. This makes
the transition from isolinux to the other syslinux loaders
easier when remastering the ISO onto another medium.