Skip to content
Snippets Groups Projects
Unverified Commit 96ac5e24 authored by nl6720's avatar nl6720
Browse files

mkarchiso: add xorrisofs options from boot mode specific functions instead of... 

mkarchiso: add xorrisofs options from boot mode specific functions instead of hardcoding them in _build_iso
parent 4dfb4737
No related branches found
No related tags found
1 merge request!99Validate profile by checking for required files and packages
Pipeline #3023 passed
Stage: build
Hide whitespace changes
Inline Side-by-side
README.profile.rst
+ 3
− 0
View file @ 96ac5e24
......@@ -36,15 +36,18 @@ The image file is constructed from some of the variables in **profiledef.sh**: `
directory on the resulting image into which all files will be installed (defaults to `mkarchiso`)
* `bootmodes`: A list of strings, that state the supported boot modes of the resulting image. Only the following are
understood:
- `bios.syslinux.mbr`: Syslinux for x86 BIOS booting from a disk
- `bios.syslinux.eltorito`: Syslinux for x86 BIOS booting from an optical disc
- `uefi-x64.systemd-boot.esp`: Systemd-boot for x86_64 UEFI booting from a disk
- `uefi-x64.systemd-boot.eltorito`: Systemd-boot for x86_64 UEFI booting from an optical disc
Note that BIOS El Torito boot mode must always be listed before UEFI El Torito boot mode.
* `arch`: The architecture (e.g. `x86_64`) to build the image for. This is also used to resolve the name of the packages
file (e.g. `packages.x86_64`)
* `pacman_conf`: The `pacman.conf` to use to install packages to the work directory when creating the image (defaults to
the host's `/etc/pacman.conf`)
* `airootfs_image_type`: The image type to create. The following options are understood (defaults to `squashfs`):
- `squashfs`: Create a squashfs image directly from the airootfs work directory
- `ext4+squashfs`: Create an ext4 partition, copy the airootfs work directory to it and create a squashfs image from it
* `airootfs_image_tool_options`: An array of options to pass to the tool to create the airootfs image. Currently only
......
archiso/mkarchiso
+ 86
− 96
View file @ 96ac5e24
......@@ -661,110 +661,100 @@ _validate_requirements_airootfs_image_type_ext4+squashfs() {
_validate_requirements_airootfs_image_type_squashfs
}
# SYSLINUX El Torito
_add_xorrisofs_options_bios.syslinux.eltorito() {
xorrisofs_options+=(
# El Torito boot image for x86 BIOS
'-eltorito-boot' 'isolinux/isolinux.bin'
# El Torito boot catalog file
'-eltorito-catalog' 'isolinux/boot.cat'
# Required options to boot with ISOLINUX
'-no-emul-boot' '-boot-load-size' '4' '-boot-info-table'
)
}
# SYSLINUX MBR
_add_xorrisofs_options_bios.syslinux.mbr() {
xorrisofs_options+=(
# SYSLINUX MBR bootstrap code; does not work without "-eltorito-boot isolinux/isolinux.bin"
'-isohybrid-mbr' "${isofs_dir}/isolinux/isohdpfx.bin"
# When GPT is used, create an additional partition in the MBR (besides 0xEE) for sectors 0–1 (MBR
# bootstrap code area) and mark it as bootable
# This violates the UEFI specification, but may allow booting on some systems
# https://wiki.archlinux.org/index.php/Partitioning#Tricking_old_BIOS_into_booting_from_GPT
'--mbr-force-bootable'
# Set the ISO 9660 partition's type to "Linux filesystem data"
# When only MBR is present, the partition type ID will be 0x83 "Linux" as xorriso translates all
# GPT partition type GUIDs except for the ESP GUID to MBR type ID 0x83
'-iso_mbr_part_type' '0FC63DAF-8483-4772-8E79-3D69D8477DE4'
# Move the first partition away from the start of the ISO to match the expectations of partition
# editors
# May allow booting on some systems
# https://dev.lovelyhq.com/libburnia/libisoburn/src/branch/master/doc/partition_offset.wiki
'-partition_offset' '16'
)
}
# systemd-boot in an attached EFI system partition
_add_xorrisofs_options_uefi-x64.systemd-boot.esp() {
# Move the first partition away from the start of the ISO, otherwise the GPT will not be valid and ISO 9660
# partition will not be mountable
# shellcheck disable=SC2076
[[ " ${xorrisofs_options[*]} " =~ ' -partition_offset ' ]] || xorrisofs_options+=('-partition_offset' '16')
xorrisofs_options+=(
# Attach efiboot.img as a second partition and set its partition type to "EFI system partition"
'-append_partition' '2' 'C12A7328-F81F-11D2-BA4B-00A0C93EC93B' "${work_dir}/efiboot.img"
# Ensure GPT is used as some systems do not support UEFI booting without it
'-appended_part_as_gpt'
)
}
# systemd-boot via El Torito
_add_xorrisofs_options_uefi-x64.systemd-boot.eltorito() {
# shellcheck disable=SC2076
if [[ " ${bootmodes[*]} " =~ ' uefi-x64.systemd-boot.esp ' ]]; then
# systemd-boot in an attached EFI system partition via El Torito
xorrisofs_options+=(
# Start a new El Torito boot entry for UEFI
'-eltorito-alt-boot'
# Set the second partition as the El Torito UEFI boot image
'-e' '--interval:appended_partition_2:all::'
# Boot image is not emulating floppy or hard disk; required for all known boot loaders
'-no-emul-boot'
)
else
# The ISO will not contain a GPT partition table, so to be able to reference efiboot.img, place it as a
# file inside the ISO 9660 file system
install -d -m 0755 -- "${isofs_dir}/EFI/archiso"
cp -a -- "${work_dir}/efiboot.img" "${isofs_dir}/EFI/archiso/efiboot.img"
# systemd-boot in an embedded efiboot.img via El Torito
xorrisofs_options+=(
# Start a new El Torito boot entry for UEFI
'-eltorito-alt-boot'
# Set efiboot.img as the El Torito UEFI boot image
'-e' 'EFI/archiso/efiboot.img'
# Boot image is not emulating floppy or hard disk; required for all known boot loaders
'-no-emul-boot'
)
fi
# Specify where to save the El Torito boot catalog file in case it is not already set by bios.syslinux.eltorito
# shellcheck disable=SC2076
[[ " ${bootmodes[*]} " =~ ' bios.' ]] || xorrisofs_options+=('-eltorito-catalog' 'EFI/boot.cat')
}
# Build ISO
_build_iso() {
local xorrisofs_options=()
local bootmode
[[ -d "${out_dir}" ]] || install -d -- "${out_dir}"
[[ "${quiet}" == "y" ]] && xorrisofs_options+=('-quiet')
# xorrisofs options for x86 BIOS booting using SYSLINUX
# shellcheck disable=SC2076
if [[ " ${bootmodes[*]} " =~ ' bios.syslinux.' ]]; then
# SYSLINUX El Torito
if [[ " ${bootmodes[*]} " =~ ' bios.syslinux.eltorito ' ]]; then
if [[ ! -f "${isofs_dir}/isolinux/isolinux.bin" ]]; then
_msg_error "The file '${isofs_dir}/isolinux/isolinux.bin' does not exist." 1
fi
# SYSLINUX MBR
if [[ " ${bootmodes[*]} " =~ ' bios.syslinux.mbr ' ]]; then
if [[ ! -f "${isofs_dir}/isolinux/isohdpfx.bin" ]]; then
_msg_error "The file '${isofs_dir}/isolinux/isohdpfx.bin' does not exist." 1
fi
xorrisofs_options+=(
# SYSLINUX MBR bootstrap code; does not work without "-eltorito-boot isolinux/isolinux.bin"
'-isohybrid-mbr' "${isofs_dir}/isolinux/isohdpfx.bin"
# When GPT is used, create an additional partition in the MBR (besides 0xEE) for sectors 0–1 (MBR
# bootstrap code area) and mark it as bootable
# This violates the UEFI specification, but may allow booting on some systems
# https://wiki.archlinux.org/index.php/Partitioning#Tricking_old_BIOS_into_booting_from_GPT
'--mbr-force-bootable'
# Set the ISO 9660 partition's type to "Linux filesystem data"
# When only MBR is present, the partition type ID will be 0x83 "Linux" as xorriso translates all
# GPT partition type GUIDs except for the ESP GUID to MBR type ID 0x83
'-iso_mbr_part_type' '0FC63DAF-8483-4772-8E79-3D69D8477DE4'
# Move the first partition away from the start of the ISO to match the expectations of partition
# editors
# May allow booting on some systems
# https://dev.lovelyhq.com/libburnia/libisoburn/src/branch/master/doc/partition_offset.wiki
'-partition_offset' '16'
)
fi
xorrisofs_options+=(
# El Torito boot image for x86 BIOS
'-eltorito-boot' 'isolinux/isolinux.bin'
# El Torito boot catalog file
'-eltorito-catalog' 'isolinux/boot.cat'
# Required options to boot with ISOLINUX
'-no-emul-boot' '-boot-load-size' '4' '-boot-info-table'
)
fi
fi
# xorrisofs options for X64 UEFI booting using systemd-boot
# shellcheck disable=SC2076
if [[ " ${bootmodes[*]} " =~ ' uefi-x64.systemd-boot.' ]]; then
[[ -f "${work_dir}/efiboot.img" ]] || _msg_error "The file '${work_dir}/efiboot.img' does not exist." 1
[[ -e "${isofs_dir}/EFI/archiso" ]] && rm -rf -- "${isofs_dir}/EFI/archiso"
# systemd-boot in an attached EFI system partition
if [[ " ${bootmodes[*]} " =~ ' uefi-x64.systemd-boot.esp ' ]]; then
# Move the first partition away from the start of the ISO, otherwise the GPT will not be valid and ISO 9660
# partition will not be mountable
[[ " ${xorrisofs_options[*]} " =~ ' -partition_offset ' ]] || xorrisofs_options+=('-partition_offset' '16')
xorrisofs_options+=(
# Attach efiboot.img as a second partition and set its partition type to "EFI system partition"
'-append_partition' '2' 'C12A7328-F81F-11D2-BA4B-00A0C93EC93B' "${work_dir}/efiboot.img"
# Ensure GPT is used as some systems do not support UEFI booting without it
'-appended_part_as_gpt'
)
# systemd-boot in an attached EFI system partition via El Torito
if [[ " ${bootmodes[*]} " =~ ' uefi-x64.systemd-boot.eltorito ' ]]; then
xorrisofs_options+=(
# Start a new El Torito boot entry for UEFI
'-eltorito-alt-boot'
# Set the second partition as the El Torito UEFI boot image
'-e' '--interval:appended_partition_2:all::'
# Boot image is not emulating floppy or hard disk; required for all known boot loaders
'-no-emul-boot'
)
fi
# systemd-boot in an embedded efiboot.img via El Torito
elif [[ " ${bootmodes[*]} " =~ ' uefi-x64.systemd-boot.eltorito ' ]]; then
# The ISO will not contain a GPT partition table, so to be able to reference efiboot.img, place it as a
# file inside the ISO 9660 file system
install -d -m 0755 -- "${isofs_dir}/EFI/archiso"
cp -a -- "${work_dir}/efiboot.img" "${isofs_dir}/EFI/archiso/efiboot.img"
xorrisofs_options+=(
# Start a new El Torito boot entry for UEFI
'-eltorito-alt-boot'
# Set efiboot.img as the El Torito UEFI boot image
'-e' 'EFI/archiso/efiboot.img'
# Boot image is not emulating floppy or hard disk; required for all known boot loaders
'-no-emul-boot'
)
fi
# Specify where to save the El Torito boot catalog file in case it is not already set by bios.syslinux.eltorito
[[ " ${bootmodes[*]} " =~ ' bios.' ]] || xorrisofs_options+=('-eltorito-catalog' 'EFI/boot.cat')
fi
# Add required xorrisofs options for each boot mode
for bootmode in "${bootmodes[@]}"; do
typeset -f "_add_xorrisofs_options_${bootmode}" &> /dev/null && "_add_xorrisofs_options_${bootmode}"
done
_msg_info "Creating ISO image..."
xorriso -as mkisofs \
......
0% or .
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment