Skip to content
Snippets Groups Projects
Verified Commit 419d6559 authored by Florian Pritz's avatar Florian Pritz
Browse files

postgres: Merge config differences from soyuz 


Signed-off-by: default avatarFlorian Pritz <bluewind@xinu.at>
parent 22c0af69
No related branches found
No related tags found
No related merge requests found
Hide whitespace changes
Inline Side-by-side
roles/postgres/templates/pg_hba.conf.j2
+ 12
− 16
View file @ 419d6559
......@@ -42,10 +42,10 @@
# or "samenet" to match any address in any subnet that the server is
# directly connected to.
#
# METHOD can be "trust", "reject", "md5", "password", "gss", "sspi",
# "ident", "peer", "pam", "ldap", "radius" or "cert". Note that
# "password" sends passwords in clear text; "md5" is preferred since
# it sends encrypted passwords.
# METHOD can be "trust", "reject", "md5", "password", "scram-sha-256",
# "gss", "sspi", "ident", "peer", "pam", "ldap", "radius" or "cert".
# Note that "password" sends passwords in clear text; "md5" or
# "scram-sha-256" are preferred since they send encrypted passwords.
#
# OPTIONS are a set of options for the authentication in the format
# NAME=VALUE. The available options depend on the different
......@@ -59,11 +59,11 @@
# its special character, and just match a database or username with
# that name.
#
# This file is read on server startup and when the postmaster receives
# a SIGHUP signal. If you edit the file on a running system, you have
# to SIGHUP the postmaster for the changes to take effect. You can
# use "pg_ctl reload" to do that.
# This file is read on server startup and when the server receives a
# SIGHUP signal. If you edit the file on a running system, you have to
# SIGHUP the server for the changes to take effect, run "pg_ctl reload",
# or execute "SELECT pg_reload_conf()".
#
# Put your actual configuration here
# ----------------------------------
#
......@@ -72,10 +72,6 @@
# listen on a non-local interface via the listen_addresses
# configuration parameter, or via the -i or -h command line switches.
# CAUTION: Configuring the system for local "trust" authentication
# allows any local user to connect as any PostgreSQL user, including
# the database superuser. If you do not trust all your local users,
# use another authentication method.
# TYPE DATABASE USER ADDRESS METHOD
......@@ -91,9 +87,9 @@ host all postgres ::1/128 md5
host sameuser all ::1/128 md5
# Allow replication connections from localhost, by a user with the
# replication privilege.
#local replication postgres trust
#host replication postgres 127.0.0.1/32 trust
#host replication postgres ::1/128 trust
#local replication all peer
#host replication all 127.0.0.1/32 md5
#host replication all ::1/128 md5
{% for host in postgres_ssl_hosts %}
hostssl all all {{ host }} md5
{% endfor %}
roles/postgres/templates/postgresql.conf.j2
+ 51
− 36
View file @ 419d6559
......@@ -16,9 +16,9 @@
#
# This file is read on server startup and when the server receives a SIGHUP
# signal. If you edit the file on a running system, you have to SIGHUP the
# server for the changes to take effect, or use "pg_ctl reload". Some
# parameters, which are marked below, require a server shutdown and restart to
# take effect.
# server for the changes to take effect, run "pg_ctl reload", or execute
# "SELECT pg_reload_conf()". Some parameters, which are marked below,
# require a server shutdown and restart to take effect.
#
# Any parameter can also be given as a command-line option to the server, e.g.,
# "postgres -c log_connections=on". Some parameters can be changed at run time
......@@ -56,7 +56,7 @@
# - Connection Settings -
listen_addresses = {{ postgres_listen_addresses }} # what IP address(es) to listen on;
listen_addresses = '{{ postgres_listen_addresses }}' # what IP address(es) to listen on;
# comma-separated list of addresses;
# defaults to 'localhost'; use '*' for all
# (change requires restart)
......@@ -78,14 +78,14 @@ max_connections = {{ postgres_max_connections }} # (change requires restart)
#authentication_timeout = 1min # 1s-600s
ssl = {{ postgres_ssl }} # (change requires restart)
#ssl_ciphers = 'HIGH:MEDIUM:+3DES:!aNULL' # allowed SSL ciphers
# (change requires restart)
ssl_prefer_server_ciphers = {{ postgres_ssl_prefer_server_ciphers }} # (change requires restart)
#ssl_ecdh_curve = 'prime256v1' # (change requires restart)
ssl_cert_file = '{{ postgres_ssl_cert_file }}' # (change requires restart)
ssl_key_file = '{{ postgres_ssl_key_file }}' # (change requires restart)
ssl_ca_file = '{{ postgres_ssl_ca_file }}' # (change requires restart)
#ssl_crl_file = '' # (change requires restart)
#password_encryption = on
ssl_prefer_server_ciphers = {{ postgres_ssl_prefer_server_ciphers }}
#ssl_ecdh_curve = 'prime256v1'
#ssl_dh_params_file = ''
ssl_cert_file = '{{ postgres_ssl_cert_file }}'
ssl_key_file = '{{ postgres_ssl_key_file }}'
ssl_ca_file = '{{ postgres_ssl_ca_file }}'
#ssl_crl_file = ''
#password_encryption = md5 # md5 or scram-sha-256
#db_user_namespace = off
#row_security = on
......@@ -131,6 +131,7 @@ dynamic_shared_memory_type = posix # the default is the first option
# windows
# mmap
# use none to disable dynamic shared memory
# (change requires restart)
# - Disk -
......@@ -156,17 +157,18 @@ dynamic_shared_memory_type = posix # the default is the first option
#bgwriter_delay = 200ms # 10-10000ms between rounds
#bgwriter_lru_maxpages = 100 # 0-1000 max buffers written/round
#bgwriter_lru_multiplier = 2.0 # 0-10.0 multiplier on buffers scanned/round
#bgwriter_flush_after = 0 # 0 disables,
# default is 512kB on linux, 0 otherwise
#bgwriter_flush_after = 512kB # measured in pages, 0 disables
# - Asynchronous Behavior -
#effective_io_concurrency = 1 # 1-1000; 0 disables prefetching
#max_worker_processes = 8 # (change requires restart)
#max_parallel_workers_per_gather = 0 # taken from max_worker_processes
#max_parallel_workers_per_gather = 2 # taken from max_parallel_workers
#max_parallel_workers = 8 # maximum number of max_worker_processes that
# can be used in parallel queries
#old_snapshot_threshold = -1 # 1min-60d; -1 disables; 0 is immediate
# (change requires restart)
#backend_flush_after = 0 # 0 disables, default is 0
# (change requires restart)
#backend_flush_after = 0 # measured in pages, 0 disables
#------------------------------------------------------------------------------
......@@ -175,11 +177,11 @@ dynamic_shared_memory_type = posix # the default is the first option
# - Settings -
#wal_level = minimal # minimal, replica, or logical
#wal_level = replica # minimal, replica, or logical
# (change requires restart)
#fsync = on # flush data to disk for crash safety
# (turning this off can cause
# unrecoverable data corruption)
# (turning this off can cause
# unrecoverable data corruption)
#synchronous_commit = on # synchronization level;
# off, local, remote_write, remote_apply, or on
#wal_sync_method = fsync # the default is the first option
......@@ -196,7 +198,7 @@ dynamic_shared_memory_type = posix # the default is the first option
#wal_buffers = -1 # min 32kB, -1 sets based on shared_buffers
# (change requires restart)
#wal_writer_delay = 200ms # 1-10000 milliseconds
#wal_writer_flush_after = 1MB # 0 disables
#wal_writer_flush_after = 1MB # measured in pages, 0 disables
#commit_delay = 0 # range 0-100000, in microseconds
#commit_siblings = 5 # range 1-1000
......@@ -207,8 +209,7 @@ dynamic_shared_memory_type = posix # the default is the first option
#max_wal_size = 1GB
#min_wal_size = 80MB
#checkpoint_completion_target = 0.5 # checkpoint target duration, 0.0 - 1.0
#checkpoint_flush_after = 0 # 0 disables,
# default is 256kB on linux, 0 otherwise
#checkpoint_flush_after = 256kB # measured in pages, 0 disables
#checkpoint_warning = 30s # 0 disables
# - Archiving -
......@@ -231,12 +232,12 @@ dynamic_shared_memory_type = posix # the default is the first option
# Set these on the master and on any standby that will send replication data.
#max_wal_senders = 0 # max number of walsender processes
#max_wal_senders = 10 # max number of walsender processes
# (change requires restart)
#wal_keep_segments = 0 # in logfile segments, 16MB each; 0 disables
#wal_sender_timeout = 60s # in milliseconds; 0 disables
#max_replication_slots = 0 # max number of replication slots
#max_replication_slots = 10 # max number of replication slots
# (change requires restart)
#track_commit_timestamp = off # collect timestamp of transaction commit
# (change requires restart)
......@@ -246,7 +247,8 @@ dynamic_shared_memory_type = posix # the default is the first option
# These settings are ignored on a standby server.
#synchronous_standby_names = '' # standby servers that provide sync rep
# number of sync standbys and comma-separated list of application_name
# method to choose sync standbys, number of sync standbys,
# and comma-separated list of application_name
# from standby(s); '*' = all
#vacuum_defer_cleanup_age = 0 # number of xacts by which cleanup is delayed
......@@ -254,7 +256,7 @@ dynamic_shared_memory_type = posix # the default is the first option
# These settings are ignored on a master server.
#hot_standby = off # "on" allows queries during recovery
#hot_standby = on # "off" disallows queries during recovery
# (change requires restart)
#max_standby_archive_delay = 30s # max delay before canceling queries
# when reading WAL from archive;
......@@ -272,6 +274,14 @@ dynamic_shared_memory_type = posix # the default is the first option
#wal_retrieve_retry_interval = 5s # time to wait before retrying to
# retrieve WAL after a failed attempt
# - Subscribers -
# These settings are ignored on a publisher.
#max_logical_replication_workers = 4 # taken from max_worker_processes
# (change requires restart)
#max_sync_workers_per_subscription = 2 # taken from max_logical_replication_workers
#------------------------------------------------------------------------------
# QUERY TUNING
......@@ -300,7 +310,8 @@ dynamic_shared_memory_type = posix # the default is the first option
#cpu_operator_cost = 0.0025 # same scale as above
#parallel_tuple_cost = 0.1 # same scale as above
#parallel_setup_cost = 1000.0 # same scale as above
#min_parallel_relation_size = 8MB
#min_parallel_table_scan_size = 8MB
#min_parallel_index_scan_size = 512kB
#effective_cache_size = 4GB
# - Genetic Query Optimizer -
......@@ -342,7 +353,7 @@ dynamic_shared_memory_type = posix # the default is the first option
# (change requires restart)
# These are only used if logging_collector is on:
#log_directory = 'pg_log' # directory where log files are written,
#log_directory = 'log' # directory where log files are written,
# can be absolute or relative to PGDATA
#log_filename = 'postgresql-%Y-%m-%d_%H%M%S.log' # log file name pattern,
# can include strftime() escapes
......@@ -369,6 +380,7 @@ dynamic_shared_memory_type = posix # the default is the first option
#syslog_split_messages = on
# This is only relevant when logging to eventlog (win32):
# (change requires restart)
#event_source = 'PostgreSQL'
# - When to Log -
......@@ -430,7 +442,7 @@ dynamic_shared_memory_type = posix # the default is the first option
#log_duration = off
#log_error_verbosity = default # terse, default, or verbose messages
#log_hostname = off
#log_line_prefix = '' # special values:
#log_line_prefix = '%m [%p] ' # special values:
# %a = application name
# %u = user name
# %d = database name
......@@ -538,7 +550,7 @@ log_timezone = 'UTC'
#session_replication_role = 'origin'
#statement_timeout = 0 # in milliseconds, 0 is disabled
#lock_timeout = 0 # in milliseconds, 0 is disabled
#idle_in_transaction_session_timeout = 0 # in milliseconds, 0 is disabled
#idle_in_transaction_session_timeout = 0 # in milliseconds, 0 is disabled
#vacuum_freeze_min_age = 50000000
#vacuum_freeze_table_age = 150000000
#vacuum_multixact_freeze_min_age = 5000000
......@@ -566,11 +578,11 @@ timezone = 'UTC'
# encoding
# These settings are initialized by initdb, but they can be changed.
lc_messages = 'en_US.UTF-8' # locale for system error message
lc_messages = 'en_US.utf-8' # locale for system error message
# strings
lc_monetary = 'en_US.UTF-8' # locale for monetary formatting
lc_numeric = 'en_US.UTF-8' # locale for number formatting
lc_time = 'en_US.UTF-8' # locale for time formatting
lc_monetary = 'en_US.utf-8' # locale for monetary formatting
lc_numeric = 'en_US.utf-8' # locale for number formatting
lc_time = 'en_US.utf-8' # locale for time formatting
# default configuration for text search
default_text_search_config = 'pg_catalog.english'
......@@ -591,6 +603,10 @@ default_text_search_config = 'pg_catalog.english'
# (change requires restart)
#max_pred_locks_per_transaction = 64 # min 10
# (change requires restart)
#max_pred_locks_per_relation = -2 # negative values mean
# (max_pred_locks_per_transaction
# / -max_pred_locks_per_relation) - 1
#max_pred_locks_per_page = 2 # min 0
#------------------------------------------------------------------------------
......@@ -606,7 +622,6 @@ default_text_search_config = 'pg_catalog.english'
#lo_compat_privileges = off
#operator_precedence_warning = off
#quote_all_identifiers = off
#sql_inheritance = on
#standard_conforming_strings = on
#synchronize_seqscans = on
......
0% or .
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment