Add postgres role and use it on apollo

Signed-off-by: Sven-Hendrik Haase <svenstaro@gmail.com>

group_vars/all/postgres.yml

 $ANSIBLE_VAULT;1.1;AES256
-66316639393734333962323264376164626437356233663165303536373661643566383463663230
-3733646361633362356465363839326133623739343664360a353832303138343537366661653333
-33363631343830613937323336383766343035353166336663316335616335316466343835306463
-3862306265383864310a313439353937376436386565343334303364376134333633313735323864
-33633665616331313932326563376565363133376438633665343932636461316530666434656236
-62313332383437383964346332653035383834343132626631396639643262353031656538643134
-66383132313837316563656630666663333166346130646334343639643462643131656533363635
-63316162303862346134633961323538623934363836313731646336623339333138376436623933
-3962
+35326537366663376136373363653536633264376661306131393766626630383036386634653335
+3632653431353134353236666163326364616465643662300a353761333933363738623561353333
+39383537373232313931303137326333663364363631633465623663626165386138343864353562
+3963343266393437650a643739373531343833336231376139633665613265313432356133623635
+64343262653361363465613766376638323138316561323738313235663661333831306334366438
+64616230623334333836333231363362633362626535656462386366666239346263343436383732
+30333134306131353031656233376335373430333032366365656364633235343066313132663232
+38613335343037613234623537353736353465343763623861343961626538326137643638353238
+63646335623463363336613938616639376263663765353939616461633032373564386132326531
+3939383638323166386661356634613066626466646437326337

playbooks/apollo.yml

@@ -15,3 +15,4 @@
     - { role: opendkim, dkim_selector: apollo, tags: ['mail', "opendkim"] }
     - { role: dovecot, tags: ['mail', "dovecot"] }
     - { role: postfwd, tags: ['mail', "postfwd"] }
+    - { role: postgres, tags: ['postgres'] }

roles/postgres/handlers/main.yml

+---
+
+- name: restart postgres
+  service: name=postgresql state=restarted

roles/postgres/tasks/main.yml

+---
+
+- name: install postgres
+  pacman: name=postgresql,python2-psycopg2 state=present
+
+- name: initialize postgres
+  become: yes
+  become_user: postgres
+  become_method: su
+  command: initdb --locale en_US.UTF-8 -E UTF8 -D '/var/lib/postgres/data'
+  args:
+    chdir: /var/lib/postgres
+    creates: /var/lib/postgres/data/postgresql.conf
+  notify:
+    - restart postgres
+
+- name: start and enable postgres
+  service: name=postgresql enabled=yes state=started
+
+- name: configure postgres
+  template: src={{ item }}.j2 dest=/var/lib/postgres/data/{{ item }} owner=postgres group=postgres mode=600
+  with_items:
+    - postgresql.conf
+    - pg_hba.conf
+  notify:
+    - restart postgres
+
+- name: set postgres user password
+  postgresql_user: name=postgres password={{ postgres_users.postgres }}
+  become: yes
+  become_user: postgres
+  become_method: su

roles/postgres/templates/pg_hba.conf.j2

+# PostgreSQL Client Authentication Configuration File
+# ===================================================
+#
+# Refer to the "Client Authentication" section in the PostgreSQL
+# documentation for a complete description of this file.  A short
+# synopsis follows.
+#
+# This file controls: which hosts are allowed to connect, how clients
+# are authenticated, which PostgreSQL user names they can use, which
+# databases they can access.  Records take one of these forms:
+#
+# local      DATABASE  USER  METHOD  [OPTIONS]
+# host       DATABASE  USER  ADDRESS  METHOD  [OPTIONS]
+# hostssl    DATABASE  USER  ADDRESS  METHOD  [OPTIONS]
+# hostnossl  DATABASE  USER  ADDRESS  METHOD  [OPTIONS]
+#
+# (The uppercase items must be replaced by actual values.)
+#
+# The first field is the connection type: "local" is a Unix-domain
+# socket, "host" is either a plain or SSL-encrypted TCP/IP socket,
+# "hostssl" is an SSL-encrypted TCP/IP socket, and "hostnossl" is a
+# plain TCP/IP socket.
+#
+# DATABASE can be "all", "sameuser", "samerole", "replication", a
+# database name, or a comma-separated list thereof. The "all"
+# keyword does not match "replication". Access to replication
+# must be enabled in a separate record (see example below).
+#
+# USER can be "all", a user name, a group name prefixed with "+", or a
+# comma-separated list thereof.  In both the DATABASE and USER fields
+# you can also write a file name prefixed with "@" to include names
+# from a separate file.
+#
+# ADDRESS specifies the set of hosts the record matches.  It can be a
+# host name, or it is made up of an IP address and a CIDR mask that is
+# an integer (between 0 and 32 (IPv4) or 128 (IPv6) inclusive) that
+# specifies the number of significant bits in the mask.  A host name
+# that starts with a dot (.) matches a suffix of the actual host name.
+# Alternatively, you can write an IP address and netmask in separate
+# columns to specify the set of hosts.  Instead of a CIDR-address, you
+# can write "samehost" to match any of the server's own IP addresses,
+# or "samenet" to match any address in any subnet that the server is
+# directly connected to.
+#
+# METHOD can be "trust", "reject", "md5", "password", "gss", "sspi",
+# "ident", "peer", "pam", "ldap", "radius" or "cert".  Note that
+# "password" sends passwords in clear text; "md5" is preferred since
+# it sends encrypted passwords.
+#
+# OPTIONS are a set of options for the authentication in the format
+# NAME=VALUE.  The available options depend on the different
+# authentication methods -- refer to the "Client Authentication"
+# section in the documentation for a list of which options are
+# available for which authentication methods.
+#
+# Database and user names containing spaces, commas, quotes and other
+# special characters must be quoted.  Quoting one of the keywords
+# "all", "sameuser", "samerole" or "replication" makes the name lose
+# its special character, and just match a database or username with
+# that name.
+#
+# This file is read on server startup and when the postmaster receives
+# a SIGHUP signal.  If you edit the file on a running system, you have
+# to SIGHUP the postmaster for the changes to take effect.  You can
+# use "pg_ctl reload" to do that.
+
+# Put your actual configuration here
+# ----------------------------------
+#
+# If you want to allow non-local connections, you need to add more
+# "host" records.  In that case you will also need to make PostgreSQL
+# listen on a non-local interface via the listen_addresses
+# configuration parameter, or via the -i or -h command line switches.
+
+# CAUTION: Configuring the system for local "trust" authentication
+# allows any local user to connect as any PostgreSQL user, including
+# the database superuser.  If you do not trust all your local users,
+# use another authentication method.
+
+
+# TYPE  DATABASE        USER            ADDRESS                 METHOD
+
+# "local" is for Unix domain socket connections only
+local   sameuser        postgres                                peer
+local   sameuser        all                                     md5
+# IPv4 local connections:
+host    all             postgres        127.0.0.1/32            md5
+host    sameuser        all             127.0.0.1/32            md5
+# IPv6 local connections:
+host    all             postgres        ::1/128                 md5
+host    sameuser        all             ::1/128                 md5
+# Allow replication connections from localhost, by a user with the
+# replication privilege.
+#local   replication     postgres                                trust
+#host    replication     postgres        127.0.0.1/32            trust
+#host    replication     postgres        ::1/128                 trust

roles/postgres/templates/postgresql.conf.j2

+# -----------------------------
+# PostgreSQL configuration file
+# -----------------------------
+#
+# This file consists of lines of the form:
+#
+#   name = value
+#
+# (The "=" is optional.)  Whitespace may be used.  Comments are introduced with
+# "#" anywhere on a line.  The complete list of parameter names and allowed
+# values can be found in the PostgreSQL documentation.
+#
+# The commented-out settings shown in this file represent the default values.
+# Re-commenting a setting is NOT sufficient to revert it to the default value;
+# you need to reload the server.
+#
+# This file is read on server startup and when the server receives a SIGHUP
+# signal.  If you edit the file on a running system, you have to SIGHUP the
+# server for the changes to take effect, or use "pg_ctl reload".  Some
+# parameters, which are marked below, require a server shutdown and restart to
+# take effect.
+#
+# Any parameter can also be given as a command-line option to the server, e.g.,
+# "postgres -c log_connections=on".  Some parameters can be changed at run time
+# with the "SET" SQL command.
+#
+# Memory units:  kB = kilobytes        Time units:  ms  = milliseconds
+#                MB = megabytes                     s   = seconds
+#                GB = gigabytes                     min = minutes
+#                TB = terabytes                     h   = hours
+#                                                   d   = days
+
+
+#------------------------------------------------------------------------------
+# FILE LOCATIONS
+#------------------------------------------------------------------------------
+
+# The default values of these variables are driven from the -D command-line
+# option or PGDATA environment variable, represented here as ConfigDir.
+
+#data_directory = 'ConfigDir'		# use data in another directory
+					# (change requires restart)
+#hba_file = 'ConfigDir/pg_hba.conf'	# host-based authentication file
+					# (change requires restart)
+#ident_file = 'ConfigDir/pg_ident.conf'	# ident configuration file
+					# (change requires restart)
+
+# If external_pid_file is not explicitly set, no extra PID file is written.
+#external_pid_file = ''			# write an extra PID file
+					# (change requires restart)
+
+
+#------------------------------------------------------------------------------
+# CONNECTIONS AND AUTHENTICATION
+#------------------------------------------------------------------------------
+
+# - Connection Settings -
+
+#listen_addresses = 'localhost'		# what IP address(es) to listen on;
+					# comma-separated list of addresses;
+					# defaults to 'localhost'; use '*' for all
+					# (change requires restart)
+#port = 5432				# (change requires restart)
+max_connections = 1000			# (change requires restart)
+# Note:  Increasing max_connections costs ~400 bytes of shared memory per
+# connection slot, plus lock space (see max_locks_per_transaction).
+#superuser_reserved_connections = 3	# (change requires restart)
+#unix_socket_directories = '/run/postgresql'	# comma-separated list of directories
+					# (change requires restart)
+#unix_socket_group = ''			# (change requires restart)
+#unix_socket_permissions = 0777		# begin with 0 to use octal notation
+					# (change requires restart)
+#bonjour = off				# advertise server via Bonjour
+					# (change requires restart)
+#bonjour_name = ''			# defaults to the computer name
+					# (change requires restart)
+
+# - Security and Authentication -
+
+#authentication_timeout = 1min		# 1s-600s
+#ssl = off				# (change requires restart)
+#ssl_ciphers = 'HIGH:MEDIUM:+3DES:!aNULL' # allowed SSL ciphers
+					# (change requires restart)
+#ssl_prefer_server_ciphers = on		# (change requires restart)
+#ssl_ecdh_curve = 'prime256v1'		# (change requires restart)
+#ssl_renegotiation_limit = 512MB	# amount of data between renegotiations
+#ssl_cert_file = 'server.crt'		# (change requires restart)
+#ssl_key_file = 'server.key'		# (change requires restart)
+#ssl_ca_file = ''			# (change requires restart)
+#ssl_crl_file = ''			# (change requires restart)
+#password_encryption = on
+#db_user_namespace = off
+
+# GSSAPI using Kerberos
+#krb_server_keyfile = ''
+#krb_caseins_users = off
+
+# - TCP Keepalives -
+# see "man 7 tcp" for details
+
+#tcp_keepalives_idle = 0		# TCP_KEEPIDLE, in seconds;
+					# 0 selects the system default
+#tcp_keepalives_interval = 0		# TCP_KEEPINTVL, in seconds;
+					# 0 selects the system default
+#tcp_keepalives_count = 0		# TCP_KEEPCNT;
+					# 0 selects the system default
+
+
+#------------------------------------------------------------------------------
+# RESOURCE USAGE (except WAL)
+#------------------------------------------------------------------------------
+
+# - Memory -
+
+shared_buffers = 4096MB			# min 128kB
+					# (change requires restart)
+huge_pages = try
+#temp_buffers = 8MB			# min 800kB
+#max_prepared_transactions = 0		# zero disables the feature
+					# (change requires restart)
+# Note:  Increasing max_prepared_transactions costs ~600 bytes of shared memory
+# per transaction slot, plus lock space (see max_locks_per_transaction).
+# It is not advisable to set max_prepared_transactions nonzero unless you
+# actively intend to use prepared transactions.
+work_mem = 10MB				# min 64kB
+#maintenance_work_mem = 64MB		# min 1MB
+#autovacuum_work_mem = -1		# min 1MB, or -1 to use maintenance_work_mem
+#max_stack_depth = 2MB			# min 100kB
+dynamic_shared_memory_type = posix	# the default is the first option
+					# supported by the operating system:
+					#   posix
+					#   sysv
+					#   windows
+					#   mmap
+					# use none to disable dynamic shared memory
+
+# - Disk -
+
+#temp_file_limit = -1			# limits per-session temp file space
+					# in kB, or -1 for no limit
+
+# - Kernel Resource Usage -
+
+#max_files_per_process = 1000		# min 25
+					# (change requires restart)
+#shared_preload_libraries = ''		# (change requires restart)
+
+# - Cost-Based Vacuum Delay -
+
+#vacuum_cost_delay = 0			# 0-100 milliseconds
+#vacuum_cost_page_hit = 1		# 0-10000 credits
+#vacuum_cost_page_miss = 10		# 0-10000 credits
+#vacuum_cost_page_dirty = 20		# 0-10000 credits
+#vacuum_cost_limit = 200		# 1-10000 credits
+
+# - Background Writer -
+
+#bgwriter_delay = 200ms			# 10-10000ms between rounds
+#bgwriter_lru_maxpages = 100		# 0-1000 max buffers written/round
+#bgwriter_lru_multiplier = 2.0		# 0-10.0 multipler on buffers scanned/round
+
+# - Asynchronous Behavior -
+
+#effective_io_concurrency = 1		# 1-1000; 0 disables prefetching
+max_worker_processes = 12
+
+
+#------------------------------------------------------------------------------
+# WRITE AHEAD LOG
+#------------------------------------------------------------------------------
+
+# - Settings -
+
+#wal_level = minimal			# minimal, archive, hot_standby, or logical
+					# (change requires restart)
+#fsync = on				# turns forced synchronization on or off
+#synchronous_commit = on		# synchronization level;
+					# off, local, remote_write, or on
+#wal_sync_method = fsync		# the default is the first option
+					# supported by the operating system:
+					#   open_datasync
+					#   fdatasync (default on Linux)
+					#   fsync
+					#   fsync_writethrough
+					#   open_sync
+#full_page_writes = on			# recover from partial page writes
+#wal_log_hints = off			# also do full page writes of non-critical updates
+					# (change requires restart)
+#wal_buffers = -1			# min 32kB, -1 sets based on shared_buffers
+					# (change requires restart)
+#wal_writer_delay = 200ms		# 1-10000 milliseconds
+
+#commit_delay = 0			# range 0-100000, in microseconds
+#commit_siblings = 5			# range 1-1000
+
+# - Checkpoints -
+
+#checkpoint_segments = 3		# in logfile segments, min 1, 16MB each
+#checkpoint_timeout = 5min		# range 30s-1h
+#checkpoint_completion_target = 0.5	# checkpoint target duration, 0.0 - 1.0
+#checkpoint_warning = 30s		# 0 disables
+
+# - Archiving -
+
+#archive_mode = off		# allows archiving to be done
+				# (change requires restart)
+#archive_command = ''		# command to use to archive a logfile segment
+				# placeholders: %p = path of file to archive
+				#               %f = file name only
+				# e.g. 'test ! -f /mnt/server/archivedir/%f && cp %p /mnt/server/archivedir/%f'
+#archive_timeout = 0		# force a logfile segment switch after this
+				# number of seconds; 0 disables
+
+
+#------------------------------------------------------------------------------
+# REPLICATION
+#------------------------------------------------------------------------------
+
+# - Sending Server(s) -
+
+# Set these on the master and on any standby that will send replication data.
+
+#max_wal_senders = 0		# max number of walsender processes
+				# (change requires restart)
+#wal_keep_segments = 0		# in logfile segments, 16MB each; 0 disables
+#wal_sender_timeout = 60s	# in milliseconds; 0 disables
+
+#max_replication_slots = 0	# max number of replication slots
+				# (change requires restart)
+
+# - Master Server -
+
+# These settings are ignored on a standby server.
+
+#synchronous_standby_names = ''	# standby servers that provide sync rep
+				# comma-separated list of application_name
+				# from standby(s); '*' = all
+#vacuum_defer_cleanup_age = 0	# number of xacts by which cleanup is delayed
+
+# - Standby Servers -
+
+# These settings are ignored on a master server.
+
+#hot_standby = off			# "on" allows queries during recovery
+					# (change requires restart)
+#max_standby_archive_delay = 30s	# max delay before canceling queries
+					# when reading WAL from archive;
+					# -1 allows indefinite delay
+#max_standby_streaming_delay = 30s	# max delay before canceling queries
+					# when reading streaming WAL;
+					# -1 allows indefinite delay
+#wal_receiver_status_interval = 10s	# send replies at least this often
+					# 0 disables
+#hot_standby_feedback = off		# send info from standby to prevent
+					# query conflicts
+#wal_receiver_timeout = 60s		# time that receiver waits for
+					# communication from master
+					# in milliseconds; 0 disables
+
+
+#------------------------------------------------------------------------------
+# QUERY TUNING
+#------------------------------------------------------------------------------
+
+# - Planner Method Configuration -
+
+#enable_bitmapscan = on
+#enable_hashagg = on
+#enable_hashjoin = on
+#enable_indexscan = on
+#enable_indexonlyscan = on
+#enable_material = on
+#enable_mergejoin = on
+#enable_nestloop = on
+#enable_seqscan = on
+#enable_sort = on
+#enable_tidscan = on
+
+# - Planner Cost Constants -
+
+#seq_page_cost = 1.0			# measured on an arbitrary scale
+#random_page_cost = 4.0			# same scale as above
+#cpu_tuple_cost = 0.01			# same scale as above
+#cpu_index_tuple_cost = 0.005		# same scale as above
+#cpu_operator_cost = 0.0025		# same scale as above
+#effective_cache_size = 4GB
+
+# - Genetic Query Optimizer -
+
+#geqo = on
+#geqo_threshold = 12
+#geqo_effort = 5			# range 1-10
+#geqo_pool_size = 0			# selects default based on effort
+#geqo_generations = 0			# selects default based on effort
+#geqo_selection_bias = 2.0		# range 1.5-2.0
+#geqo_seed = 0.0			# range 0.0-1.0
+
+# - Other Planner Options -
+
+#default_statistics_target = 100	# range 1-10000
+#constraint_exclusion = partition	# on, off, or partition
+#cursor_tuple_fraction = 0.1		# range 0.0-1.0
+#from_collapse_limit = 8
+#join_collapse_limit = 8		# 1 disables collapsing of explicit
+					# JOIN clauses
+
+
+#------------------------------------------------------------------------------
+# ERROR REPORTING AND LOGGING
+#------------------------------------------------------------------------------
+
+# - Where to Log -
+
+#log_destination = 'stderr'		# Valid values are combinations of
+					# stderr, csvlog, syslog, and eventlog,
+					# depending on platform.  csvlog
+					# requires logging_collector to be on.
+
+# This is used when logging to stderr:
+#logging_collector = off		# Enable capturing of stderr and csvlog
+					# into log files. Required to be on for
+					# csvlogs.
+					# (change requires restart)
+
+# These are only used if logging_collector is on:
+#log_directory = 'pg_log'		# directory where log files are written,
+					# can be absolute or relative to PGDATA
+#log_filename = 'postgresql-%Y-%m-%d_%H%M%S.log'	# log file name pattern,
+					# can include strftime() escapes
+#log_file_mode = 0600			# creation mode for log files,
+					# begin with 0 to use octal notation
+#log_truncate_on_rotation = off		# If on, an existing log file with the
+					# same name as the new log file will be
+					# truncated rather than appended to.
+					# But such truncation only occurs on
+					# time-driven rotation, not on restarts
+					# or size-driven rotation.  Default is
+					# off, meaning append to existing files
+					# in all cases.
+#log_rotation_age = 1d			# Automatic rotation of logfiles will
+					# happen after that time.  0 disables.
+#log_rotation_size = 10MB		# Automatic rotation of logfiles will
+					# happen after that much log output.
+					# 0 disables.
+
+# These are relevant when logging to syslog:
+#syslog_facility = 'LOCAL0'
+#syslog_ident = 'postgres'
+
+# This is only relevant when logging to eventlog (win32):
+#event_source = 'PostgreSQL'
+
+# - When to Log -
+
+#client_min_messages = notice		# values in order of decreasing detail:
+					#   debug5
+					#   debug4
+					#   debug3
+					#   debug2
+					#   debug1
+					#   log
+					#   notice
+					#   warning
+					#   error
+
+#log_min_messages = warning		# values in order of decreasing detail:
+					#   debug5
+					#   debug4
+					#   debug3
+					#   debug2
+					#   debug1
+					#   info
+					#   notice
+					#   warning
+					#   error
+					#   log
+					#   fatal
+					#   panic
+
+#log_min_error_statement = error	# values in order of decreasing detail:
+					#   debug5
+					#   debug4
+					#   debug3
+					#   debug2
+					#   debug1
+					#   info
+					#   notice
+					#   warning
+					#   error
+					#   log
+					#   fatal
+					#   panic (effectively off)
+
+#log_min_duration_statement = -1	# -1 is disabled, 0 logs all statements
+					# and their durations, > 0 logs only
+					# statements running at least this number
+					# of milliseconds
+
+
+# - What to Log -
+
+#debug_print_parse = off
+#debug_print_rewritten = off
+#debug_print_plan = off
+#debug_pretty_print = on
+#log_checkpoints = off
+#log_connections = off
+#log_disconnections = off
+#log_duration = off
+#log_error_verbosity = default		# terse, default, or verbose messages
+#log_hostname = off
+#log_line_prefix = ''			# special values:
+					#   %a = application name
+					#   %u = user name
+					#   %d = database name
+					#   %r = remote host and port
+					#   %h = remote host
+					#   %p = process ID
+					#   %t = timestamp without milliseconds
+					#   %m = timestamp with milliseconds
+					#   %i = command tag
+					#   %e = SQL state
+					#   %c = session ID
+					#   %l = session line number
+					#   %s = session start timestamp
+					#   %v = virtual transaction ID
+					#   %x = transaction ID (0 if none)
+					#   %q = stop here in non-session
+					#        processes
+					#   %% = '%'
+					# e.g. '<%u%%%d> '
+#log_lock_waits = off			# log lock waits >= deadlock_timeout
+#log_statement = 'none'			# none, ddl, mod, all
+#log_temp_files = -1			# log temporary files equal or larger
+					# than the specified size in kilobytes;
+					# -1 disables, 0 logs all temp files
+log_timezone = 'UTC'
+
+
+#------------------------------------------------------------------------------
+# RUNTIME STATISTICS
+#------------------------------------------------------------------------------
+
+# - Query/Index Statistics Collector -
+
+#track_activities = on
+#track_counts = on
+#track_io_timing = off
+#track_functions = none			# none, pl, all
+#track_activity_query_size = 1024	# (change requires restart)
+#update_process_title = on
+#stats_temp_directory = 'pg_stat_tmp'
+
+
+# - Statistics Monitoring -
+
+#log_parser_stats = off
+#log_planner_stats = off
+#log_executor_stats = off
+#log_statement_stats = off
+
+
+#------------------------------------------------------------------------------
+# AUTOVACUUM PARAMETERS
+#------------------------------------------------------------------------------
+
+#autovacuum = on			# Enable autovacuum subprocess?  'on'
+					# requires track_counts to also be on.
+#log_autovacuum_min_duration = -1	# -1 disables, 0 logs all actions and
+					# their durations, > 0 logs only
+					# actions running at least this number
+					# of milliseconds.
+#autovacuum_max_workers = 3		# max number of autovacuum subprocesses
+					# (change requires restart)
+#autovacuum_naptime = 1min		# time between autovacuum runs
+#autovacuum_vacuum_threshold = 50	# min number of row updates before
+					# vacuum
+#autovacuum_analyze_threshold = 50	# min number of row updates before
+					# analyze
+#autovacuum_vacuum_scale_factor = 0.2	# fraction of table size before vacuum
+#autovacuum_analyze_scale_factor = 0.1	# fraction of table size before analyze
+#autovacuum_freeze_max_age = 200000000	# maximum XID age before forced vacuum
+					# (change requires restart)
+#autovacuum_multixact_freeze_max_age = 400000000	# maximum multixact age
+					# before forced vacuum
+					# (change requires restart)
+#autovacuum_vacuum_cost_delay = 20ms	# default vacuum cost delay for
+					# autovacuum, in milliseconds;
+					# -1 means use vacuum_cost_delay
+#autovacuum_vacuum_cost_limit = -1	# default vacuum cost limit for
+					# autovacuum, -1 means use
+					# vacuum_cost_limit
+
+
+#------------------------------------------------------------------------------
+# CLIENT CONNECTION DEFAULTS
+#------------------------------------------------------------------------------
+
+# - Statement Behavior -
+
+#search_path = '"$user",public'		# schema names
+#default_tablespace = ''		# a tablespace name, '' uses the default
+#temp_tablespaces = ''			# a list of tablespace names, '' uses
+					# only default tablespace
+#check_function_bodies = on
+#default_transaction_isolation = 'read committed'
+#default_transaction_read_only = off
+#default_transaction_deferrable = off
+#session_replication_role = 'origin'
+#statement_timeout = 0			# in milliseconds, 0 is disabled
+#lock_timeout = 0			# in milliseconds, 0 is disabled
+#vacuum_freeze_min_age = 50000000
+#vacuum_freeze_table_age = 150000000
+#vacuum_multixact_freeze_min_age = 5000000
+#vacuum_multixact_freeze_table_age = 150000000
+#bytea_output = 'hex'			# hex, escape
+#xmlbinary = 'base64'
+#xmloption = 'content'
+
+# - Locale and Formatting -
+
+datestyle = 'iso, mdy'
+#intervalstyle = 'postgres'
+timezone = 'UTC'
+#timezone_abbreviations = 'Default'     # Select the set of available time zone
+					# abbreviations.  Currently, there are
+					#   Default
+					#   Australia (historical usage)
+					#   India
+					# You can create your own file in
+					# share/timezonesets/.
+#extra_float_digits = 0			# min -15, max 3
+#client_encoding = sql_ascii		# actually, defaults to database
+					# encoding
+
+# These settings are initialized by initdb, but they can be changed.
+lc_messages = 'en_US.UTF-8'			# locale for system error message
+					# strings
+lc_monetary = 'en_US.UTF-8'			# locale for monetary formatting
+lc_numeric = 'en_US.UTF-8'			# locale for number formatting
+lc_time = 'en_US.UTF-8'				# locale for time formatting
+
+# default configuration for text search
+default_text_search_config = 'pg_catalog.english'
+
+# - Other Defaults -
+
+#dynamic_library_path = '$libdir'
+#local_preload_libraries = ''
+#session_preload_libraries = ''
+
+
+#------------------------------------------------------------------------------
+# LOCK MANAGEMENT
+#------------------------------------------------------------------------------
+
+#deadlock_timeout = 1s
+#max_locks_per_transaction = 64		# min 10
+					# (change requires restart)
+# Note:  Each lock table slot uses ~270 bytes of shared memory, and there are
+# max_locks_per_transaction * (max_connections + max_prepared_transactions)
+# lock table slots.
+#max_pred_locks_per_transaction = 64	# min 10
+					# (change requires restart)
+
+
+#------------------------------------------------------------------------------
+# VERSION/PLATFORM COMPATIBILITY
+#------------------------------------------------------------------------------
+
+# - Previous PostgreSQL Versions -
+
+#array_nulls = on
+#backslash_quote = safe_encoding	# on, off, or safe_encoding
+#default_with_oids = off
+#escape_string_warning = on
+#lo_compat_privileges = off
+#quote_all_identifiers = off
+#sql_inheritance = on
+#standard_conforming_strings = on
+#synchronize_seqscans = on
+
+# - Other Platforms and Clients -
+
+#transform_null_equals = off
+
+
+#------------------------------------------------------------------------------
+# ERROR HANDLING
+#------------------------------------------------------------------------------
+
+#exit_on_error = off			# terminate session on any error?
+#restart_after_crash = on		# reinitialize after backend crash?
+
+
+#------------------------------------------------------------------------------
+# CONFIG FILE INCLUDES
+#------------------------------------------------------------------------------
+
+# These options allow settings to be loaded from files other than the
+# default postgresql.conf.
+
+#include_dir = 'conf.d'			# include files ending in '.conf' from
+					# directory 'conf.d'
+#include_if_exists = 'exists.conf'	# include file only if it exists
+#include = 'special.conf'		# include file
+
+
+#------------------------------------------------------------------------------
+# CUSTOMIZED OPTIONS
+#------------------------------------------------------------------------------
+
+# Add settings for extensions here