This project is mirrored from https://git.kernel.org/pub/scm/linux/kernel/git/rt/linux-stable-rt.git.
Pull mirroring updated .
- Nov 07, 2011
-
-
david decotigny authored
Function ndo_get_stats() updates most of the stats from hardware registers, making the manual updates un-needed. This change removes these manual updates. Main exception is rx_missed_errors which needs manual update. Another exception is rx_packets, still updated manually in this commit to make sure this patch doesn't change behavior of driver. This will be addressed by a future patch. Signed-off-by:
David Decotigny <david.decotigny@google.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Mike Ditto authored
This is to avoid a race, accidentally acknowledging an interrupt that we didn't notice and won't immediately process. This is based solely on code inspection; it is not known if there was an actual bug here. Signed-off-by:
-
david decotigny authored
When forcedeth module is unloaded, there exists a path that can lead to mod_timer() after del_timer_sync(), causing an oops. This patch short-circuits this unneeded path, which originates in nv_get_ethtool_stats(). Tested: x86_64 16-way + 3 ethtool -S infinite loops + 100Mbps incoming traffic + rmmod/modprobe/ifconfig in a loop Initial-Author: Salman Qazi <sqazi@google.com> Discussion: http://patchwork.ozlabs.org/patch/123548/ Signed-off-by:
-
Or Gerlitz authored
update for the actual maintainer Signed-off-by:
Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by:
-
Richard Weinberger authored
The BKL is gone, these annotations are useless. Signed-off-by:
Richard Weinberger <richard@nod.at> Signed-off-by:
-
Konstantin Khlebnikov authored
This patch fixes the bug added in commit v3.1-rc7-1055-gf9b491e SKB can be NULL at this point, at least for cdc-ncm. Signed-off-by:
Konstantin Khlebnikov <khlebnikov@openvz.org> Acked-by:
Richard Cochran <richardcochran@gmail.com> Signed-off-by:
-
Rose, Gregory V authored
Fix compiler errors and warnings with CONFIG_PCI_IOV defined and not defined. Signed-off-by:
Greg Rose <gregory.v.rose@intel.com> Signed-off-by:
-
- Nov 05, 2011
-
-
Jeff Kirsher authored
During the re-organization of Ethernet drivers, the MAINTAINERS entry for etherh got dropped accidentally. CC: Russell King <linux@arm.linux.org.uk> CC: Joe Perches <joe@perches.com> Signed-off-by:
Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by:
-
- Nov 04, 2011
-
-
Dan Carpenter authored
slave->duplex is a u8 type so the in bond_info_show_slave() when we check "if (slave->duplex == -1)", it's always false. Signed-off-by:
Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by:
-
stephen hemminger authored
Changes to support other Optima types, introduced an accidental regression that caused 88E8059 to come up in 10Mbit/sec. The Yukon Optima supports a reverse auto-negotiation feature that was incorrectly setup, and not needed. The feature could be used to allow wake-on-lan at higher speeds. But doing it correctly would require other changes to initialization. Reported-by:
Pavel Mateja <pavel@netsafe.cz> Signed-off-by:
Stephen Hemminger <shemminger@vyatta.com> Signed-off-by:
-
Johannes Berg authored
The documentation for how the length of attributes is checked is wrong ("Exact length" isn't true, the policy checks are for "minimum length") and a bit misleading. Make it more complete and explain what really happens. Cc: Thomas Graf <tgraf@suug.ch> Signed-off-by:Johannes Berg <johannes.berg@intel.com> Signed-off-by:
-
Johannes Berg authored
L2TP for example uses NLA_MSECS like this: policy: [L2TP_ATTR_RECV_TIMEOUT] = { .type = NLA_MSECS, }, code: if (info->attrs[L2TP_ATTR_RECV_TIMEOUT]) cfg.reorder_timeout = nla_get_msecs(info->attrs[L2TP_ATTR_RECV_TIMEOUT]); As nla_get_msecs() is essentially nla_get_u64() plus the conversion to a HZ-based value, this will not properly reject attributes from userspace that aren't long enough and might overrun the message. Add NLA_MSECS to the attribute minlen array to check the size properly. Cc: Thomas Graf <tgraf@suug.ch> Cc: stable@vger.kernel.org Signed-off-by: -
Jeff Kirsher authored
i825xx and xscale are "sub" Kconfigs to NET_VENDOR_INTEL, so NET_VENDOR_INTEL should contain ALL the dependencies of the "sub" Kconfigs. Same with 8390 is a "sub" Kconfig to NET_VENDOR_NATSEMI, so NET_VENDOR_NATSEMI needs to contains ALL the dependencies. Freescale Kconfig only had fs_enet as a sub Kconfig, and already contained the needed dependencies, just cleaned up the dependencies. Reported-by:
Geert Uytterhoeven <geert@linux-m68k.org> Signed-off-by:
-
stephen hemminger authored
When implementing VRRP v2 using macvlan several problems were discovered. VRRP is weird in that all routers participating in a redundant group use the same virtual MAC address. Macvlan is a natural driver to use for this but it doesn't work. The problem is that packets with a macvlan device's source address are not received. The problem is actually a regression that date back almost 2 years now. The original problems started with: commit 618e1b74 Author: Arnd Bergmann <arnd@arndb.de> Date: Thu Nov 26 06:07:10 2009 +0000 macvlan: implement bridge, VEPA and private mode This patches restores the original 2.6.32 behavior. Allowing multicast packets received with the VRRP source address to be received. Signed-off-by:
-
Matt Carlson authored
This patch updates the tg3 version to 3.121. Signed-off-by:
Matt Carlson <mcarlson@broadcom.com> Reviewed-by:
Michael Chan <mchan@broadcom.com> Signed-off-by:
-
Matt Carlson authored
During shutdown, it is impossible to reliably disable the timer and reset_task threads. Each thread can schedule the other, which leads to shutdown code that chases its tail. To fix the problem, this patch removes the ability of tg3_reset_task to schedule a new timer thread. To support this change, tg3_timer no longer terminates itself, but rather goes into a polling mode. Signed-off-by:
-
Matt Carlson authored
It is possible for multiple threads in the tg3 driver to each attempt to schedule a run of tg3_reset_task(). The multiple tg3_reset_task executions could all wind up on the same queue (and execute serially) or wind up on the queues of another processor (which could execute in parallel). Either scenario is not what was truly desired. This patch adds a new flag, TG3_FLAG_RESET_TASK_PENDING, and uses it to determine whether or not to schedule another run of tg3_reset_task(). With the new flag comes two new functions to facilitate scheduling and descheduling of tg3_reset_task(). Signed-off-by:
-
Matt Carlson authored
This patch adds code to attempt to obtain the PCI function number from the device rather than accept the number handed by the kernel. In pass-through scenarios, the function number handed by the kernel may not reflect the true function of the device. Signed-off-by:
-
Matt Carlson authored
This patch fixes a bug where the irq error cleanup path did not free all the resources it allocated. Signed-off-by:
Ben Li <benli@broadcom.com> Signed-off-by:
Akinobu Mita <akinobu.mita@gmail.com> Reviewed-by:
-
Matt Carlson authored
On the error recovery resource unwind path, it is possible for the driver to attempt to unmap a fragment that hadn't been mapped. This patch fixes the problem by correcting the "last" parameter supplied. Signed-off-by:
-
Matt Carlson authored
The new 4k tx bd segmentation code had a bug in the error cleanup path. If the driver did not map all the physical fragments, the abort path would wind up advancing the producer index beyond the point where the setup code stopped. This would ultimately turn into a tx recovery error where the driver would expect the skb pointer to be set when it isn't. This patch fixes the problem, and then makes the code a little easier to understand. Signed-off-by:
-
Matt Carlson authored
APE mutex register blocks are shared by all ports of multiport devices. For some mutexing purposes, each function is assigned their own register. For other cases, each function is assigned its own request and grant bits of a single register. For the latter cases, the tg3 driver is incorrectly allowing each function to use the same set of grant / request bits. This patch fixes the code so that each function uses the appropriate bitset. Signed-off-by:
-
-
git://github.com/cmetcalf-tilera/linux-tileLinus Torvalds authored
* 'for-linus' of git://github.com/cmetcalf-tilera/linux-tile: arch/tile: factor out <arch/opcode.h> header arch/tile: add the <arch> headers to the set of installed kernel headers arch/tile: avoid exporting a symbol no longer used by gcc arch/tile: avoid ISO namespace pollution with <asm/sigcontext.h>
-
git://git.linux-nfs.org/projects/trondmy/linux-nfsLinus Torvalds authored
* 'nfs-for-3.2' of git://git.linux-nfs.org/projects/trondmy/linux-nfs: (25 commits) nfs: set vs_hidden on nfs4_callback_version4 (try #2) pnfs-obj: Support for RAID5 read-4-write interface. pnfs-obj: move to ore 03: Remove old raid engine pnfs-obj: move to ore 02: move to ORE pnfs-obj: move to ore 01: ore_layout & ore_components pnfs-obj: Rename objlayout_io_state => objlayout_io_res pnfs-obj: Get rid of objlayout_{alloc,free}_io_state pnfs-obj: Return PNFS_NOT_ATTEMPTED in case of read/write_pagelist pnfs-obj: Remove redundant EOF from objlayout_io_state nfs: Remove unused variable from write.c nfs: Fix unused variable warning from file.c NFS: Remove no-op less-than-zero checks on unsigned variables. NFS: Clean up nfs4_xdr_dec_secinfo() NFS: Fix documenting comment for nfs_create_request() NFS4: fix cb_recallany decode error nfs4: serialize layoutcommit SUNRPC: remove rpcbind clients destruction on module cleanup SUNRPC: remove rpcbind clients creation during service registering NFSd: call svc rpcbind cleanup explicitly SUNRPC: cleanup service destruction ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/roland/infinibandLinus Torvalds authored
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/roland/infiniband: IB/qib: Fix panic in RC error flushing logic IB/iser: DMA unmap TX bufs used for iSCSI/iSER headers IB/iser: Use separate buffers for the login request/response IB/mthca: Fix buddy->num_free allocation size
-
Wang Sheng-Hui authored
Remove 'as' for as is no longer supported, and we can not use 'elevator=as' any more. Signed-off-by:
Wang Sheng-Hui <shhuiw@gmail.com> Signed-off-by:
Randy Dunlap <rdunlap@xenotime.net> Cc: Jens Axboe <axboe@kernel.dk> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
Bryan Wu authored
Fix a typo (duplicated word) in Documentation/leds/leds-class.txt Signed-off-by:
Bryan Wu <bryan.wu@canonical.com> Acked-by:
Richard Purdie <rchard.purdie@linuxfoundation.org> Signed-off-by:
-
Marcos Paulo Souza authored
Removed the email for support and fixes for orphaned ip2 driver. Signed-off-by:
Marcos Paulo de Souza <marcos.mage@gmail.com> Signed-off-by:
-
Marcos Paulo de Souza authored
Removed the reference of Roman Zippel, last maintainer, of orphaned HFS filesystem. Signed-off-by:
-
Antonio Ospite authored
After commit 38829dc9 ("Documentation/CodingStyle: flesh out if-else examples") highlight that if _only_one_ branch of a conditional statement is a single statement, then braces are to be used on both branches. Signed-off-by:
Antonio Ospite <ospite@studenti.unina.it> Signed-off-by:
-
Marcos Paulo de Souza authored
Fixes the path to find the source files of the inotify subsystem. Signed-off-by:
-
Kumar Appaiah authored
This adds minor grammatical fixes to the description of the keys in the thinkpad-acpi documentation. Signed-off-by:
Kumar Appaiah <a.kumar@alumni.iitm.ac.in> Signed-off-by:
-
Li Zefan authored
- ns cgroup has been removed. - it's true moving a task to another cgroup can fail. Signed-off-by:
Li Zefan <lizf@cn.fujitsu.com> Acked-by:
Paul Menage <paul@paulmenage.org> Signed-off-by:
-
John W. Linville authored
Merge branch 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless into for-davem
-
Johannes Berg authored
The warning really shouldn't happen, but until we find the reason why it does don't spew it all the time, just once is enough to know we've hit it. Reported-by:
John W. Linville <linville@tuxdriver.com>
-
Roland Dreier authored
-
Mike Marciniszyn authored
The following panic can occur when flushing a QP: RIP: 0010:[<ffffffffa0168e8b>] [<ffffffffa0168e8b>] qib_send_complete+0x3b/0x190 [ib_qib] RSP: 0018:ffff8803cdc6fc90 EFLAGS: 00010046 RAX: 0000000000000000 RBX: ffff8803d84ba000 RCX: 0000000000000000 RDX: 0000000000000005 RSI: ffffc90015a53430 RDI: ffff8803d84ba000 RBP: ffff8803cdc6fce0 R08: ffff8803cdc6fc90 R09: 0000000000000001 R10: 00000000ffffffff R11: 0000000000000000 R12: ffff8803d84ba0c0 R13: ffff8803d84ba5cc R14: 0000000000000800 R15: 0000000000000246 FS: 0000000000000000(0000) GS:ffff880036600000(0000) knlGS:0000000000000000 CS: 0010 DS: 0018 ES: 0018 CR0: 000000008005003b CR2: 0000000000000034 CR3: 00000003e44f9000 CR4: 00000000000406f0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400 Process qib/0 (pid: 1350, threadinfo ffff8803cdc6e000, task ffff88042728a100) Stack: 53544c5553455201 0000000100000005 0000000000000000 ffff8803d84ba000 0000000000000000 0000000000000000 0000000000000000 0000000000000000 0000000000000000 0000000000000001 ffff8803cdc6fd30 ffffffffa0165d7a Call Trace: [<ffffffffa0165d7a>] qib_make_rc_req+0x36a/0xe80 [ib_qib] [<ffffffffa0165a10>] ? qib_make_rc_req+0x0/0xe80 [ib_qib] [<ffffffffa01698b3>] qib_do_send+0xf3/0xb60 [ib_qib] [<ffffffff814db757>] ? thread_return+0x4e/0x777 [<ffffffffa01697c0>] ? qib_do_send+0x0/0xb60 [ib_qib] [<ffffffff81088bf0>] worker_thread+0x170/0x2a0 [<ffffffff8108e530>] ? autoremove_wake_function+0x0/0x40 [<ffffffff81088a80>] ? worker_thread+0x0/0x2a0 [<ffffffff8108e1c6>] kthread+0x96/0xa0 [<ffffffff8100c1ca>] child_rip+0xa/0x20 [<ffffffff8108e130>] ? kthread+0x0/0xa0 [<ffffffff8100c1c0>] ? child_rip+0x0/0x20 RIP [<ffffffffa0168e8b>] qib_send_complete+0x3b/0x190 [ib_qib] The RC error state flush logic in qib_make_rc_req() could return all of the acked wqes and potentially have emptied the queue. It would then unconditionally try return a flush completion via qib_send_complete() for an invalid wqe, or worse a valid one that is not queued. The panic results when the completion code tries to maintain an MR reference count for a NULL MR. This fix modifies logic to only send one completion per qib_make_rc_req() call and changing the completion status from IB_WC_SUCCESS to IB_WC_WR_FLUSH_ERR as the completions progress. The outer loop will call as many times as necessary to flush the queue. Reviewed-by:Ram Vepa <ram.vepa@qlogic.com> Signed-off-by:
Mike Marciniszyn <mike.marciniszyn@qlogic.com> Signed-off-by:
Roland Dreier <roland@purestorage.com>
-
git://git.kernel.org/pub/scm/linux/kernel/git/aegl/linuxLinus Torvalds authored
* 'process_vm' of git://git.kernel.org/pub/scm/linux/kernel/git/aegl/linux: [IA64] Wire up cross memory attach syscalls
-
Or Gerlitz authored
The current driver never does DMA unmapping on these buffers. Fix that by adding DMA unmapping to the task cleanup callback, and DMA mapping to the task init function (drop the headers_initialized micro-optimization). Signed-off-by:
-
