net_cls: fix unconfigured struct tcf_proto keeps chaining and avoid kernel panic when we use cls_cgroup

This patch fixes a bug which unconfigured struct tcf_proto keeps
chaining in tc_ctl_tfilter(), and avoids kernel panic in
cls_cgroup_classify() when we use cls_cgroup.

When we execute 'tc filter add', tcf_proto is allocated, initialized
by classifier's init(), and chained.  After it's chained,
tc_ctl_tfilter() calls classifier's change().  When classifier's
change() fails, tc_ctl_tfilter() does not free and keeps tcf_proto.

In addition, cls_cgroup is initialized in change() not in init().  It
accesses unconfigured struct tcf_proto which is chained before
change(), then hits Oops.

Signed-off-by: Minoru Usui <usui@mxm.nes.nec.co.jp>
Signed-off-by: Jarek Poplawski <jarkao2@gmail.com>
Signed-off-by: Jamal Hadi Salim <hadi@cyberus.ca>
Tested-by: Minoru Usui <usui@mxm.nes.nec.co.jp>
Signed-off-by: David S. Miller <davem@davemloft.net>

The svcrdma module was incorrectly unmapping the RPCRDMA header page.
On IBM pserver systems this causes a resource leak that results in
running out of bus address space (10 cthon iterations will reproduce it).
The code was mapping the full page but only unmapping the actual header
length.  The fix is to only map the header length.

I also cleaned up the use of ib_dma_map_page() calls since the unmap
logic always uses ib_dma_unmap_single().  I made these symmetrical.

Signed-off-by: Steve Wise <swise@opengridcomputing.com>
Signed-off-by: Tom Tucker <tom@opengridcomputing.com>
Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>

This reverts commit 47a14ef1 "svcrpc:
take advantage of tcp autotuning", which uncovered some further problems
in the server rpc code, causing significant performance regressions in
common cases.

We will likely reinstate this patch after releasing 2.6.30 and applying
some work on the underlying fixes to the problem (developed by Trond).

Reported-by: Jeff Moyer <jmoyer@redhat.com>
Cc: Olga Kornievskaia <aglo@citi.umich.edu>
Cc: Jim Rees <rees@umich.edu>
Cc: Trond Myklebust <trond.myklebust@fys.uio.no>
Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>

This problem was introduced in 72961ecf
since no space was reserved for the new attributes NFULA_HWTYPE,
NFULA_HWLEN and NFULA_HWHEADER.

Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Patrick McHardy <kaber@trash.net>

The function dl_seq_show() returns 1 (equal to SEQ_SKIP) in case
a seq_printf() call return -1.  It should return -1.

This SEQ_SKIP behavior brakes processing the proc file e.g. via a
pipe or just through less.

Signed-off-by: Jesper Dangaard Brouer <hawk@comx.dk>
Signed-off-by: Patrick McHardy <kaber@trash.net>

The calls to flush_work() are pointless in a single thread workqueue
and they are actually causing a lockdep warning.

=============================================
[ INFO: possible recursive locking detected ]
2.6.30-rc6-02911-gbb803cf #16
---------------------------------------------
bluetooth/2518 is trying to acquire lock:
 (bluetooth){+.+.+.}, at: [<c0130c14>] flush_work+0x28/0xb0

but task is already holding lock:
 (bluetooth){+.+.+.}, at: [<c0130424>] worker_thread+0x149/0x25e

other info that might help us debug this:
2 locks held by bluetooth/2518:
 #0:  (bluetooth){+.+.+.}, at: [<c0130424>] worker_thread+0x149/0x25e
 #1:  (&conn->work_del){+.+...}, at: [<c0130424>] worker_thread+0x149/0x25e

stack backtrace:
Pid: 2518, comm: bluetooth Not tainted 2.6.30-rc6-02911-gbb803cf #16
Call Trace:
 [<c03d64d9>] ? printk+0xf/0x11
 [<c0140d96>] __lock_acquire+0x7ce/0xb1b
 [<c0141173>] lock_acquire+0x90/0xad
 [<c0130c14>] ? flush_work+0x28/0xb0
 [<c0130c2e>] flush_work+0x42/0xb0
 [<c0130c14>] ? flush_work+0x28/0xb0
 [<f8b84966>] del_conn+0x1c/0x84 [bluetooth]
 [<c0130469>] worker_thread+0x18e/0x25e
 [<c0130424>] ? worker_thread+0x149/0x25e
 [<f8b8494a>] ? del_conn+0x0/0x84 [bluetooth]
 [<c0133843>] ? autoremove_wake_function+0x0/0x33
 [<c01302db>] ? worker_thread+0x0/0x25e
 [<c013355a>] kthread+0x45/0x6b
 [<c0133515>] ? kthread+0x0/0x6b
 [<c01034a7>] kernel_thread_helper+0x7/0x10

Based on a report by Oliver Hartkopp <oliver@hartkopp.net>

Signed-off-by: Dave Young <hidave.darkstar@gmail.com>
Tested-by: Oliver Hartkopp <oliver@hartkopp.net>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>

Avoid reading the unsynchronized value cs->classid multiple times,
since it could change concurrently from non-zero to zero; this would
result in the classifier returning a positive result with a bogus
(zero) classid.

Signed-off-by: Paul Menage <menage@google.com>
Reviewed-by: Li Zefan <lizf@cn.fujitsu.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

mlx4/connectX FRMR requires local write enable together with remote
rdma write enable. This fixes NFS/RDMA operation over the ConnectX
Infiniband HCA in the default memreg mode.

Signed-off-by: Vu Pham <vu@mellanox.com>
Signed-off-by: Tom Talpey <tmtalpey@gmail.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>

This patch fixes ssthresh accounting issues in tcp_vegas when cwnd decreases

Signed-off-by: Doug Leith <doug.leith@nuim.ie>
Signed-off-by: David S. Miller <davem@davemloft.net>

This patch adds the missing protocol state-change event reporting
for DCCP.

$ sudo conntrack -E
    [NEW] dccp     33 240 src=192.168.0.2 dst=192.168.1.2 sport=57040 dport=5001 [UNREPLIED] src=192.168.1.2 dst=192.168.1.100 sport=5001 dport=57040

With this patch:

$ sudo conntrack -E
    [NEW] dccp     33 240 REQUEST src=192.168.0.2 dst=192.168.1.2 sport=57040 dport=5001 [UNREPLIED] src=192.168.1.2 dst=192.168.1.100 sport=5001 dport=57040

Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Patrick McHardy <kaber@trash.net>

Robert L Mathews discovered that some clients send evil TCP RST segments,
which are accepted by netfilter conntrack but discarded by the
destination. Thus the conntrack entry is destroyed but the destination
retransmits data until timeout.

The same technique, i.e. sending properly crafted RST segments, can easily
be used to bypass connlimit/connbytes based restrictions (the sample
script written by Robert can be found in the netfilter mailing list
archives).

The patch below adds a new flag and new field to struct ip_ct_tcp_state so
that checking RST segments can be made more strict and thus TCP conntrack
can catch the invalid ones: the RST segment is accepted only if its
sequence number higher than or equal to the highest ack we seen from the
other direction. (The last_ack field cannot be reused because it is used
to catch resent packets.)

Signed-off-by: Jozsef Kadlecsik <kadlec@blackhole.kfki.hu>
Signed-off-by: Patrick McHardy <kaber@trash.net>

rxrpc_alloc_connection() doesn't return an error code on failure, it just
returns NULL.  IS_ERR(NULL) is false.

Signed-off-by: Dan Carpenter <error27@gmail.com>
Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

It seems we can fix this by disabling preemption while we re-balance the 
trie. This is with the CONFIG_CLASSIC_RCU. It's been stress-tested at high 
loads continuesly taking a full BGP table up/down via iproute -batch.

Note. fib_trie is not updated for CONFIG_PREEMPT_RCU

Reported-by: Andrei Popa
Signed-off-by: Robert Olsson <robert.olsson@its.uu.se>
Signed-off-by: David S. Miller <davem@davemloft.net>

typo -- pkt_dev->nflows is for stats only, the number of concurrent
flows is stored in cflows.

Reported-By: Vladimir Ivashchenko <hazard@francoudi.com>
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: David S. Miller <davem@davemloft.net>

The use of unspecified protocol in IPv6 initial route prevents quagga to
install IPv6 default route:
# show ipv6 route
S   ::/0 [1/0] via fe80::1, eth1_0
K>* ::/0 is directly connected, lo, rej
C>* ::1/128 is directly connected, lo
C>* fe80::/64 is directly connected, eth1_0

# ip -6 route
fe80::/64 dev eth1_0  proto kernel  metric 256  mtu 1500 advmss 1440
hoplimit -1
ff00::/8 dev eth1_0  metric 256  mtu 1500 advmss 1440 hoplimit -1
unreachable default dev lo  proto none  metric -1  error -101 hoplimit 255

The attached patch ensures RTPROT_KERNEL to the default initial route
and fixes the problem for quagga.
This is similar to "ipv6: protocol for address routes"
f410a1fb.

# show ipv6 route
S>* ::/0 [1/0] via fe80::1, eth1_0
C>* ::1/128 is directly connected, lo
C>* fe80::/64 is directly connected, eth1_0

# ip -6 route
fe80::/64 dev eth1_0  proto kernel  metric 256  mtu 1500 advmss 1440
hoplimit -1
fe80::/64 dev eth1_0  proto kernel  metric 256  mtu 1500 advmss 1440
hoplimit -1
ff00::/8 dev eth1_0  metric 256  mtu 1500 advmss 1440 hoplimit -1
default via fe80::1 dev eth1_0  proto zebra  metric 1024  mtu 1500
advmss 1440 hoplimit -1
unreachable default dev lo  proto kernel  metric -1  error -101 hoplimit 255

Signed-off-by: Jean-Mickael Guerin <jean-mickael.guerin@6wind.com>
Signed-off-by: Stephen Hemminger <shemminger@vyatta.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Alexander V. Lukyanov found a regression in 2.6.29 and made a complete
analysis found in http://bugzilla.kernel.org/show_bug.cgi?id=13339


Quoted here because its a perfect one :

begin_of_quotation
 2.6.29 patch has introduced flexible route cache rebuilding. Unfortunately the
 patch has at least one critical flaw, and another problem.

 rt_intern_hash calculates rthi pointer, which is later used for new entry
 insertion. The same loop calculates cand pointer which is used to clean the
 list. If the pointers are the same, rtable leak occurs, as first the cand is
 removed then the new entry is appended to it.

 This leak leads to unregister_netdevice problem (usage count > 0).

 Another problem of the patch is that it tries to insert the entries in certain
 order, to facilitate counting of entries distinct by all but QoS parameters.
 Unfortunately, referencing an existing rtable entry moves it to list beginning,
 to speed up further lookups, so the carefully built order is destroyed.

 For the first problem the simplest patch it to set rthi=0 when rthi==cand, but
 it will also destroy the ordering.
end_of_quotation

Problematic commit is 1080d709
(net: implement emergency route cache rebulds when gc_elasticity is exceeded)

Trying to keep dst_entries ordered is too complex and breaks the fact that
order should depend on the frequency of use for garbage collection.

A possible fix is to make rt_intern_hash() simpler, and only makes
rt_check_expire() a litle bit smarter, being able to cope with an arbitrary
entries order. The added loop is running on cache hot data, while cpu
is prefetching next object, so should be unnoticied.

Reported-and-analyzed-by: Alexander V. Lukyanov <lav@yar.ru>
Signed-off-by: Eric Dumazet <dada1@cosmosbay.com>
Acked-by: Neil Horman <nhorman@tuxdriver.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

rt_check_expire() computes average and standard deviation of chain lengths,
but not correclty reset length to 0 at beginning of each chain.
This probably gives overflows for sum2 (and sum) on loaded machines instead
of meaningful results.

Signed-off-by: Eric Dumazet <dada1@cosmosbay.com>
Acked-by: Neil Horman <nhorman@tuxdriver.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Its possible for cfg80211 to have scheduled the work and for
the global workqueue to not have kicked in prior to a cfg80211
driver's regulatory hint or wiphy_apply_custom_regulatory().

Although this is very unlikely its possible and should fix
this race. When this race would happen you are expected to have
hit a null pointer dereference panic.

Cc: stable@kernel.org
Signed-off-by: Luis R. Rodriguez <lrodriguez@atheros.com>
Tested-by: Alan Jenkins <alan-jenkins@tuffmail.co.uk>
Signed-off-by: John W. Linville <linville@tuxdriver.com>

Another design flaw in wireless extensions (is anybody
surprised?) in the way it handles the iw_encode_ext
structure: The structure is part of the 'extra' memory
but contains the key length explicitly, instead of it
just being the length of the extra buffer - size of
the struct and using the explicit key length only for
the get operation (which only writes it).

Therefore, we have this layout:

extra: +-------------------------+
       | struct iw_encode_ext  { |
       |     ...                 |
       |     u16 key_len;        |
       |     u8 key[0];          |
       | };                      |
       +-------------------------+
       | key material            |
       +-------------------------+

Now, all drivers I checked use ext->key_len without
checking that both key_len and the struct fit into the
extra buffer that has been copied from userspace. This
leads to a buffer overrun while reading that buffer,
depending on the driver it may be possible to specify
arbitrary key_len or it may need to be a proper length
for the key algorithm specified.

Thankfully, this is only exploitable by root, but root
can actually cause a segfault or use kernel memory as
a key (which you can even get back with siocgiwencode
or siocgiwencodeext from the key buffer).

Fix this by verifying that key_len fits into the buffer
along with struct iw_encode_ext.

Signed-off-by: Johannes Berg <johannes@sipsolutions.net>
Signed-off-by: John W. Linville <linville@tuxdriver.com>

Commit e81963b1 ("ipv4: Make INET_LRO a bool instead of tristate.")
changed this config from tristate to bool.  Add default so that it is
consistent with the help text.

Signed-off-by: Frans Pop <elendil@planet.nl>
Signed-off-by: David S. Miller <davem@davemloft.net>

When called with a consumed value that is less than skb_headlen(skb)
bytes into a page frag, skb_seq_read() incorrectly returns an
offset/length relative to skb->data. Ensure that data which should come
from a page frag does.

Signed-off-by: Thomas Chenault <thomas_chenault@dell.com>
Tested-by: Shyam Iyer <shyam_iyer@dell.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

gen_estimator can overflow bps (bytes per second) with Gb links, while
it was designed with a u32 API, with a theorical limit of 34360Mbit
(2^32 bytes)

Using 64 bit intermediate avbps/brate counters can allow us to reach
this theorical limit.

Signed-off-by: Eric Dumazet <dada1@cosmosbay.com>
Signed-off-by: Jarek Poplawski <jarkao2@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

It is illegal to dereference a skb after a successful ndo_start_xmit()
call. We must store skb length in a local variable instead.

Bug was introduced in 2.6.27 by commit 0abf77e5
(net_sched: Add accessor function for packet length for qdiscs)

Signed-off-by: Eric Dumazet <dada1@cosmosbay.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Commit 518a09ef (tcp: Fix recvmsg MSG_PEEK influence of
blocking behavior) lets the loop run longer than the race check
did previously expect, so we need to be more careful with this
check and consider the work we have been doing.

I tried my best to deal with urg hole madness too which happens
here:
	if (!sock_flag(sk, SOCK_URGINLINE)) {
		++*seq;
		...
by using additional offset by one but I certainly have very
little interest in testing that part.

Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@helsinki.fi>
Tested-by: Frans Pop <elendil@planet.nl>
Tested-by: Ian Zimmermann <itz@buug.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

If bridge is configured with no STP and forwarding delay of 0 (which
is typical for virtualization) then when link starts it will flood all
packets for the first 20 seconds.

This bug was introduced by a combination of earlier changes:
  * forwarding database uses hold time of zero to indicate
    user wants to always flood packets
  * optimzation of the case of forwarding delay of 0 avoids the initial
    timer tick

The fix is to just skip all the topology change detection code if
kernel STP is not being used.

Signed-off-by: Stephen Hemminger <shemminger@vyatta.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Currently the bridge catches all STP packets; even if STP is turned
off.  This prevents other systems (which do have STP turned on)
from being able to detect loops in the network.

With this patch, if STP is off, then any packet sent to the STP
multicast group address is forwarded to all ports.

Based on earlier patch by Joakim Tjernlund with changes
to go through forwarding (not local chain), and optimization
that only last octet needs to be checked.

Signed-off-by: Stephen Hemminger <shemminger@vyatta.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

If a DHCP server is delayed, it's possible for the client to receive the 
DHCPOFFER after it has already sent out a new DHCPDISCOVER message from 
a second interface.  The client then sends out a DHCPREQUEST from the 
second interface, but the server doesn't recognize the device and 
rejects the request.

This patch simply tracks the current device being configured and throws 
away the OFFER if it is not intended for the current device.  A more 
sophisticated approach would be to put the OFFER information into the 
struct ic_device rather than storing it globally.

Signed-off-by: Chris Friesen <cfriesen@nortel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

It looks like the dev in netpoll_poll can be NULL - at lease it's
checked at the function beginning. Thus the dev->netde_ops dereference
looks dangerous.

Signed-off-by: Pavel Emelyanov <xemul@openvz.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

"There is another problem with this piece of code. The sband will be NULL
after second iteration on single band device and cause null pointer
dereference. Everything is working with dual band card. Sorry, but i
don't know how to explain this clearly in English. I have looked on the
second patch for pid algorithm and found similar bug."

Reported-by: Karol Szuster <qflon@o2.pl>
Signed-off-by: John W. Linville <linville@tuxdriver.com>

A remote device in security mode 3 that tries to connect will require
the pairing during the connection setup phase. The disconnect timeout
is now triggered within 10 milliseconds and causes the pairing to fail.

If a connection is not fully established and a PIN code request is
received, don't trigger the disconnect timeout. The either successful
or failing connection complete event will make sure that the timeout
is triggered at the right time.

The biggest problem with security mode 3 is that many Bluetooth 2.0
device and before use a temporary security mode 3 for dedicated
bonding.

Based on a report by Johan Hedberg <johan.hedberg@nokia.com>

Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Tested-by: Johan Hedberg <johan.hedberg@nokia.com>

The connection setup phase takes around 2 seconds or longer and in
that time it is possible that the need for an ACL connection is no
longer present. If that happens then, the connection attempt will
be canceled.

This only applies to outgoing connections, but currently it can also
be triggered by incoming connection. Don't call hci_acl_connect_cancel()
on incoming connection since these have to be either accepted or rejected
in this state. Once they are successfully connected they need to be
fully disconnected anyway.

Also remove the wrong hci_acl_disconn() call for SCO and eSCO links
since at this stage they can't be disconnected either, because the
connection handle is still unknown.

Based on a report by Johan Hedberg <johan.hedberg@nokia.com>

Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Tested-by: Johan Hedberg <johan.hedberg@nokia.com>

The module refcount is increased by hci_dev_hold() call in hci_conn_add()
and decreased by hci_dev_put() call in del_conn(). In case the connection
setup fails, hci_dev_put() is never called.

Procedure to reproduce the issue:

  # hciconfig hci0 up
  # lsmod | grep btusb                   -> "used by" refcount = 1

  # hcitool cc <non-exisiting bdaddr>    -> will get timeout

  # lsmod | grep btusb                   -> "used by" refcount = 2
  # hciconfig hci0 down
  # lsmod | grep btusb                   -> "used by" refcount = 1
  # rmmod btusb                          -> ERROR: Module btusb is in use

The hci_dev_put() call got moved into del_conn() with the 2.6.25 kernel
to fix an issue with hci_dev going away before hci_conn. However that
change was wrong and introduced this problem.

When calling hci_conn_del() it has to call hci_dev_put() after freeing
the connection details. This handling should be fully symmetric. The
execution of del_conn() is done in a work queue and needs it own calls
to hci_dev_hold() and hci_dev_put() to ensure that the hci_dev stays
until the connection cleanup has been finished.

Based on a report by Bing Zhao <bzhao@marvell.com>

Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Tested-by: Bing Zhao <bzhao@marvell.com>

This fixes the use of fwmarks to denote IPv4 virtual services
which was unfortunately broken as a result of the integration
of IPv6 support into IPVS, which was included in 2.6.28.

The problem arises because fwmarks are stored in the 4th octet
of a union nf_inet_addr .all, however in the case of IPv4 only
the first octet, corresponding to .ip, is assigned and compared.

In other words, using .all = { 0, 0, 0, htonl(svc->fwmark) always
results in a value of 0 (32bits) being stored for IPv4. This means
that one fwmark can be used, as it ends up being mapped to 0, but things
break down when multiple fwmarks are used, as they all end up being mapped
to 0.

As fwmarks are 32bits a reasonable fix seems to be to just store the fwmark
in .ip, and comparing and storing .ip when fwmarks are used.

This patch makes the assumption that in calls to ip_vs_ct_in_get()
and ip_vs_sched_persist() if the proto parameter is IPPROTO_IP then
we are dealing with an fwmark. I believe this is valid as ip_vs_in()
does fairly strict filtering on the protocol and IPPROTO_IP should
not be used in these calls unless explicitly passed when making
these calls for fwmarks in ip_vs_sched_persist().

Tested-by: Fabien Duchêne <fabien.duchene@student.uclouvain.be>
Cc: Joseph Mack NA3T <jmack@wm7d.net>
Cc: Julius Volz <julius.volz@gmail.com>
Signed-off-by: Simon Horman <horms@verge.net.au>
Signed-off-by: David S. Miller <davem@davemloft.net>

This code is used as a library by several device drivers,
which select INET_LRO.

If some are modules and some are statically built into the
kernel, we get build failures if INET_LRO is modular.

Signed-off-by: David S. Miller <davem@davemloft.net>

Signed-off-by: Ashish Karkare <akarkare@marvell.com>
Signed-off-by: Lennert Buytenhek <buytenh@marvell.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Commit ac45f602 ("net: infrastructure
for hardware time stamping") added two skb initialization actions to
__alloc_skb(), which need to be added to skb_recycle_check() as well.

Signed-off-by: Lennert Buytenhek <buytenh@wantstofly.org>
Signed-off-by: Patrick Ohly <patrick.ohly@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

When no limit is given, the bfifo uses a default of tx_queue_len * mtu.
Packets handled by qdiscs include the link layer header, so this should
be taken into account, similar to what other qdiscs do.

Signed-off-by: Patrick McHardy <kaber@trash.net>
Signed-off-by: David S. Miller <davem@davemloft.net>

When a new wimax_dev is created, it's state has to be __WIMAX_ST_NULL
until wimax_dev_add() is succesfully called. This allows calls into
the stack that happen before said time to be rejected.

Until now, the state was being set (by mistake) to UNINITIALIZED,
which was allowing calls such as wimax_report_rfkill_hw() to go
through even when a call to wimax_dev_add() had failed; that was
causing an oops when touching uninitialized data.

This situation is normal when the device starts reporting state before
the whole initialization has been completed. It just has to be dealt
with.

Signed-off-by: Inaky Perez-Gonzalez <inaky@linux.intel.com>

When sending a message to user space using wimax_msg(), if nla_put()
fails, correctly interpret the return code from wimax_msg_alloc() as
an err ptr and return the error code instead of crashing (as it is
assuming than non-NULL means the pointer is ok).

Signed-off-by: Inaky Perez-Gonzalez <inaky@linux.intel.com>

Setting the name of a sysfs device has to be done in a context that can
actually sleep. It allocates its memory with GFP_KERNEL. Previously it
was a static (size limited) string and that got changed to accommodate
longer device names. So move the dev_set_name() just before calling
device_add() which is executed in a work queue.

This fixes the following error:

[  110.012125] BUG: sleeping function called from invalid context at mm/slub.c:1595
[  110.012135] in_atomic(): 1, irqs_disabled(): 0, pid: 0, name: swapper
[  110.012141] 2 locks held by swapper/0:
[  110.012145]  #0:  (hci_task_lock){++.-.+}, at: [<ffffffffa01f822f>] hci_rx_task+0x2f/0x2d0 [bluetooth]
[  110.012173]  #1:  (&hdev->lock){+.-.+.}, at: [<ffffffffa01fb9e2>] hci_event_packet+0x72/0x25c0 [bluetooth]
[  110.012198] Pid: 0, comm: swapper Tainted: G        W 2.6.30-rc4-g953cdaa #1
[  110.012203] Call Trace:
[  110.012207]  <IRQ>  [<ffffffff8023eabd>] __might_sleep+0x14d/0x170
[  110.012228]  [<ffffffff802cfbe1>] __kmalloc+0x111/0x170
[  110.012239]  [<ffffffff803c2094>] kvasprintf+0x64/0xb0
[  110.012248]  [<ffffffff803b7a5b>] kobject_set_name_vargs+0x3b/0xa0
[  110.012257]  [<ffffffff80465326>] dev_set_name+0x76/0xa0
[  110.012273]  [<ffffffffa01fb9e2>] ? hci_event_packet+0x72/0x25c0 [bluetooth]
[  110.012289]  [<ffffffffa01ffc1d>] hci_conn_add_sysfs+0x3d/0x70 [bluetooth]
[  110.012303]  [<ffffffffa01fba2c>] hci_event_packet+0xbc/0x25c0 [bluetooth]
[  110.012312]  [<ffffffff80516eb0>] ? sock_def_readable+0x80/0xa0
[  110.012328]  [<ffffffffa01fee0c>] ? hci_send_to_sock+0xfc/0x1c0 [bluetooth]
[  110.012343]  [<ffffffff80516eb0>] ? sock_def_readable+0x80/0xa0
[  110.012347]  [<ffffffff805e88c5>] ? _read_unlock+0x75/0x80
[  110.012354]  [<ffffffffa01fee0c>] ? hci_send_to_sock+0xfc/0x1c0 [bluetooth]
[  110.012360]  [<ffffffffa01f8403>] hci_rx_task+0x203/0x2d0 [bluetooth]
[  110.012365]  [<ffffffff80250ab5>] tasklet_action+0xb5/0x160
[  110.012369]  [<ffffffff8025116c>] __do_softirq+0x9c/0x150
[  110.012372]  [<ffffffff805e850f>] ? _spin_unlock+0x3f/0x80
[  110.012376]  [<ffffffff8020cbbc>] call_softirq+0x1c/0x30
[  110.012380]  [<ffffffff8020f01d>] do_softirq+0x8d/0xe0
[  110.012383]  [<ffffffff80250df5>] irq_exit+0xc5/0xe0
[  110.012386]  [<ffffffff8020e71d>] do_IRQ+0x9d/0x120
[  110.012389]  [<ffffffff8020c3d3>] ret_from_intr+0x0/0xf
[  110.012391]  <EOI>  [<ffffffff80431832>] ? acpi_idle_enter_bm+0x264/0x2a6
[  110.012399]  [<ffffffff80431828>] ? acpi_idle_enter_bm+0x25a/0x2a6
[  110.012403]  [<ffffffff804f50d5>] ? cpuidle_idle_call+0xc5/0x130
[  110.012407]  [<ffffffff8020a4b4>] ? cpu_idle+0xc4/0x130
[  110.012411]  [<ffffffff805d2268>] ? rest_init+0x88/0xb0
[  110.012416]  [<ffffffff807e2fbd>] ? start_kernel+0x3b5/0x412
[  110.012420]  [<ffffffff807e2281>] ? x86_64_start_reservations+0x91/0xb5
[  110.012424]  [<ffffffff807e2394>] ? x86_64_start_kernel+0xef/0x11b

Based on a report by Davide Pesavento <davidepesa@gmail.com>

Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Tested-by: Hugo Mildenberger <hugo.mildenberger@namir.de>
Tested-by: Bing Zhao <bzhao@marvell.com>