This project is mirrored from https://git.kernel.org/pub/scm/linux/kernel/git/rt/linux-stable-rt.git.
Pull mirroring updated .
- Jun 19, 2023
-
-
- Jun 18, 2023
-
-
Luis Claudio R. Goncalves authored
Signed-off-by:Luis Claudio R. Goncalves <lgoncalv@redhat.com>
-
-
- Jun 14, 2023
-
-
Greg Kroah-Hartman authored
Link: https://lore.kernel.org/r/20230612101651.048240731@linuxfoundation.org Tested-by:
Chris Paterson (CIP) <chris.paterson2@renesas.com> Tested-by:
Jon Hunter <jonathanh@nvidia.com> Tested-by:
Harshit Mogalapalli <harshit.m.mogalapalli@oracle.com> Tested-by:
Linux Kernel Functional Testing <lkft@linaro.org> Tested-by:
Guenter Roeck <linux@roeck-us.net> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Greg Kroah-Hartman authored
This reverts commit 8809b5e3 which is commit fda20938 upstream. Ben reports that this should not have been backported to the older kernels as the rest of the macro is not empty. It was a clean-up patch in 6.4-rc1 only, it did not add new device ids. Reported-by:
Ben Hutchings <ben@decadent.org.uk> Cc: Philipp Hortmann <philipp.g.hortmann@gmail.com> Cc: Sasha Levin <sashal@kernel.org> Link: https://lore.kernel.org/r/aa0d401a7f63448cd4c2fe4a2d7e8495d9aa123e.camel@decadent.org.uk Signed-off-by:
-
Zixuan Fu authored
commit 85f02d6c upstream. In btrfs_relocate_block_group(), the rc is allocated. Then btrfs_relocate_block_group() calls relocate_block_group() prepare_to_relocate() set_reloc_control() that assigns rc to the variable fs_info->reloc_ctl. When prepare_to_relocate() returns, it calls btrfs_commit_transaction() btrfs_start_dirty_block_groups() btrfs_alloc_path() kmem_cache_zalloc() which may fail for example (or other errors could happen). When the failure occurs, btrfs_relocate_block_group() detects the error and frees rc and doesn't set fs_info->reloc_ctl to NULL. After that, in btrfs_init_reloc_root(), rc is retrieved from fs_info->reloc_ctl and then used, which may cause a use-after-free bug. This possible bug can be triggered by calling btrfs_ioctl_balance() before calling btrfs_ioctl_defrag(). To fix this possible bug, in prepare_to_relocate(), check if btrfs_commit_transaction() fails. If the failure occurs, unset_reloc_control() is called to set fs_info->reloc_ctl to NULL. The error log in our fault-injection testing is shown as follows: [ 58.751070] BUG: KASAN: use-after-free in btrfs_init_reloc_root+0x7ca/0x920 [btrfs] ... [ 58.753577] Call Trace: ... [ 58.755800] kasan_report+0x45/0x60 [ 58.756066] btrfs_init_reloc_root+0x7ca/0x920 [btrfs] [ 58.757304] record_root_in_trans+0x792/0xa10 [btrfs] [ 58.757748] btrfs_record_root_in_trans+0x463/0x4f0 [btrfs] [ 58.758231] start_transaction+0x896/0x2950 [btrfs] [ 58.758661] btrfs_defrag_root+0x250/0xc00 [btrfs] [ 58.759083] btrfs_ioctl_defrag+0x467/0xa00 [btrfs] [ 58.759513] btrfs_ioctl+0x3c95/0x114e0 [btrfs] ... [ 58.768510] Allocated by task 23683: [ 58.768777] ____kasan_kmalloc+0xb5/0xf0 [ 58.769069] __kmalloc+0x227/0x3d0 [ 58.769325] alloc_reloc_control+0x10a/0x3d0 [btrfs] [ 58.769755] btrfs_relocate_block_group+0x7aa/0x1e20 [btrfs] [ 58.770228] btrfs_relocate_chunk+0xf1/0x760 [btrfs] [ 58.770655] __btrfs_balance+0x1326/0x1f10 [btrfs] [ 58.771071] btrfs_balance+0x3150/0x3d30 [btrfs] [ 58.771472] btrfs_ioctl_balance+0xd84/0x1410 [btrfs] [ 58.771902] btrfs_ioctl+0x4caa/0x114e0 [btrfs] ... [ 58.773337] Freed by task 23683: ... [ 58.774815] kfree+0xda/0x2b0 [ 58.775038] free_reloc_control+0x1d6/0x220 [btrfs] [ 58.775465] btrfs_relocate_block_group+0x115c/0x1e20 [btrfs] [ 58.775944] btrfs_relocate_chunk+0xf1/0x760 [btrfs] [ 58.776369] __btrfs_balance+0x1326/0x1f10 [btrfs] [ 58.776784] btrfs_balance+0x3150/0x3d30 [btrfs] [ 58.777185] btrfs_ioctl_balance+0xd84/0x1410 [btrfs] [ 58.777621] btrfs_ioctl+0x4caa/0x114e0 [btrfs] ... Reported-by:
TOTE Robot <oslab@tsinghua.edu.cn> CC: stable@vger.kernel.org # 5.15+ Reviewed-by:
Sweet Tea Dorminy <sweettea-kernel@dorminy.me> Reviewed-by:
Nikolay Borisov <nborisov@suse.com> Signed-off-by:
Zixuan Fu <r33s3n6@gmail.com> Signed-off-by:
David Sterba <dsterba@suse.com> Signed-off-by:
Stefan Ghinea <stefan.ghinea@windriver.com> Signed-off-by:
-
Josef Bacik authored
commit fb686c68 upstream. There are a few places where we don't check the return value of btrfs_commit_transaction in relocation.c. Thankfully all these places have straightforward error handling, so simply change all of the sites at once. Reviewed-by:
Qu Wenruo <wqu@suse.com> Signed-off-by:
Josef Bacik <josef@toxicpanda.com> Reviewed-by:
-
Theodore Ts'o authored
commit dea9d8f7 upstream. ext4_xattr_block_set() relies on its caller to call dquot_initialize() on the inode. To assure that this has happened there are WARN_ON checks. Unfortunately, this is subject to false positives if there is an antagonist thread which is flipping the file system at high rates between r/o and rw. So only do the check if EXT4_XATTR_DEBUG is enabled. Link: https://lore.kernel.org/r/20230608044056.GA1418535@mit.edu Signed-off-by:
Theodore Ts'o <tytso@mit.edu> Signed-off-by:
-
Uwe Kleine-König authored
[ Upstream commit ca0aa17f ] If pm runtime resume fails the .remove callback used to exit early. This resulted in an error message by the driver core but the device gets removed anyhow. This lets the registered i2c adapter stay around with an unbound parent device. So only skip clk disabling if resume failed, but do delete the adapter. Fixes: 8b9ec071 ("i2c: Add Spreadtrum I2C controller driver") Signed-off-by:
Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Reviewed-by:
Andi Shyti <andi.shyti@kernel.org> Signed-off-by:
Wolfram Sang <wsa@kernel.org> Signed-off-by:
Sasha Levin <sashal@kernel.org>
-
Luiz Augusto von Dentz authored
commit c5d2b6fa upstream. Similar to commit 0f7d9b31 ("netfilter: nf_tables: fix use-after-free in nft_set_catchall_destroy()"). We can not access k after kfree_rcu() call. Cc: stable@vger.kernel.org Signed-off-by:
Min Li <lm0963hack@gmail.com> Signed-off-by:
Luiz Augusto von Dentz <luiz.von.dentz@intel.com> Signed-off-by:
-
Xiubo Li authored
commit 409e873e upstream. There is a race between capsnaps flush and removing the inode from 'mdsc->snap_flush_list' list: == Thread A == == Thread B == ceph_queue_cap_snap() -> allocate 'capsnapA' ->ihold('&ci->vfs_inode') ->add 'capsnapA' to 'ci->i_cap_snaps' ->add 'ci' to 'mdsc->snap_flush_list' ... == Thread C == ceph_flush_snaps() ->__ceph_flush_snaps() ->__send_flush_snap() handle_cap_flushsnap_ack() ->iput('&ci->vfs_inode') this also will release 'ci' ... == Thread D == ceph_handle_snap() ->flush_snaps() ->iterate 'mdsc->snap_flush_list' ->get the stale 'ci' ->remove 'ci' from ->ihold(&ci->vfs_inode) this 'mdsc->snap_flush_list' will WARNING To fix this we will increase the inode's i_count ref when adding 'ci' to the 'mdsc->snap_flush_list' list. [ idryomov: need_put int -> bool ] Cc: stable@vger.kernel.org Link: https://bugzilla.redhat.com/show_bug.cgi?id=2209299 Signed-off-by:
Xiubo Li <xiubli@redhat.com> Reviewed-by:
Milind Changire <mchangir@redhat.com> Reviewed-by:
Ilya Dryomov <idryomov@gmail.com> Signed-off-by:
-
Chia-I Wu authored
commit b447b079 upstream. According to Alex, most APUs from that time seem to have the same issue (vbios says 48Mhz, actual is 100Mhz). I only have a CHIP_STONEY so I limit the fixup to CHIP_STONEY Signed-off-by:
Chia-I Wu <olvaffe@gmail.com> Signed-off-by:
Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org Signed-off-by:
-
Dmitry Torokhov authored
commit 7b63a88b upstream. The kernel only allocate 5 MT slots; check that transmitted slot ID falls within the acceptable range. Link: https://lore.kernel.org/r/ZFnEL91nrT789dbG@google.com Cc: stable@vger.kernel.org Signed-off-by:
Dmitry Torokhov <dmitry.torokhov@gmail.com> Signed-off-by:
-
Ismael Ferreras Morezuelas authored
commit feee70f4 upstream. While doing my research to improve the xpad device names I noticed that the 1532:0037 VID/PID seems to be used by the DeathAdder 2013, so that Razer Sabertooth instance looked wrong and very suspect to me. I didn't see any mention in the official drivers, either. After doing more research, it turns out that the xpad list is used by many other projects (like Steam) as-is [1], this issue was reported [2] and Valve/Sam Lantinga fixed it [3]: [1]: https://github.com/libsdl-org/SDL/blob/dcc5eef0e2395854b254ea2873a4899edab347c6/src/joystick/controller_type.h#L251 [2]: https://steamcommunity.com/app/353380/discussions/0/1743392486228754770/ [3]: https://hg.libsdl.org/SDL/rev/29809f6f0271 (With multiple Internet users reporting similar issues, not linked here) After not being able to find the correct VID/PID combination anywhere on the Internet and not receiving any reply from Razer support I did some additional detective work, it seems like it presents itself as "Razer Sabertooth Gaming Controller (XBOX360)", code 1689:FE00. Leaving us with this: * Razer Sabertooth (1689:fe00) * Razer Sabertooth Elite (24c6:5d04) * Razer DeathAdder 2013 (1532:0037) [note: not a gamepad] So, to sum things up; remove this conflicting/duplicate entry: { 0x1532, 0x0037, "Razer Sabertooth", 0, XTYPE_XBOX360 }, As the real/correct one is already present there, even if the Internet as a whole insists on presenting it as the Razer Sabertooth Elite, which (by all accounts) is not: { 0x1689, 0xfe00, "Razer Sabertooth", 0, XTYPE_XBOX360 }, Actual change in SDL2 referencing this kernel issue: https://github.com/libsdl-org/SDL/commit/e5e54169754ca5d3e86339d968b20126d9da0a15 For more information of the device, take a look here: https://github.com/xboxdrv/xboxdrv/pull/59 You can see a lsusb dump here: https://github.com/xboxdrv/xboxdrv/files/76581/Qa6dBcrv.txt Fixes: f554f619 ("Input: xpad - sync device IDs with xboxdrv") Signed-off-by:
Ismael Ferreras Morezuelas <swyterzone@gmail.com> Reviewed-by:
Cameron Gutman <aicommander@gmail.com> Cc: stable@vger.kernel.org Link: https://lore.kernel.org/r/5c12dbdb-5774-fc68-5c58-ca596383663e@gmail.com Signed-off-by:
-
Vladislav Efanov authored
commit abac3ac9 upstream. Syzkaller got a lot of crashes like: KASAN: use-after-free Write in *_timers* All of these crashes point to the same memory area: The buggy address belongs to the object at ffff88801f870000 which belongs to the cache kmalloc-8k of size 8192 The buggy address is located 5320 bytes inside of 8192-byte region [ffff88801f870000, ffff88801f872000) This area belongs to : batadv_priv->batadv_priv_dat->delayed_work->timer_list The reason for these issues is the lack of synchronization. Delayed work (batadv_dat_purge) schedules new timer/work while the device is being deleted. As the result new timer/delayed work is set after cancel_delayed_work_sync() was called. So after the device is freed the timer list contains pointer to already freed memory. Found by Linux Verification Center (linuxtesting.org) with syzkaller. Cc: stable@kernel.org Fixes: 2f1dfbe1 ("batman-adv: Distributed ARP Table - implement local storage") Signed-off-by:
Vladislav Efanov <VEfanov@ispras.ru> Acked-by:
Sven Eckelmann <sven@narfation.org> Signed-off-by:
Simon Wunderlich <sw@simonwunderlich.de> Signed-off-by:
-
Somnath Kotur authored
[ Upstream commit 1a9e4f50 ] We need to call bnxt_hwrm_func_qcfg() on a VF to query the default VLAN that may be setup by the PF. If a default VLAN is enabled, the VF cannot support VLAN acceleration on the receive side and the VNIC must be setup to strip out the default VLAN tag. If a default VLAN is not enabled, the VF can support VLAN acceleration on the receive side. The VNIC should be set up to strip or not strip the VLAN based on the RX VLAN acceleration setting. Without this call to determine the default VLAN before calling bnxt_setup_vnic(), the VNIC may not be set up correctly. For example, bnxt_setup_vnic() may set up to strip the VLAN tag based on stale default VLAN information. If RX VLAN acceleration is not enabled, the VLAN tag will be incorrectly stripped and the RX data path will not work correctly. Fixes: cf6645f8 ("bnxt_en: Add function for VF driver to query default VLAN.") Reviewed-by:
Pavan Chebbi <pavan.chebbi@broadcom.com> Signed-off-by:
Somnath Kotur <somnath.kotur@broadcom.com> Signed-off-by:
Michael Chan <michael.chan@broadcom.com> Signed-off-by:
Paolo Abeni <pabeni@redhat.com> Signed-off-by:
-
Ben Hutchings authored
[ Upstream commit 7c5d4801 ] irq_cpu_rmap_release() calls cpu_rmap_put(), which may free the rmap. So we need to clear the pointer to our glue structure in rmap before doing that, not after. Fixes: 4e0473f1 ("lib: cpu_rmap: Avoid use after free on rmap->obj array entries") Signed-off-by:
Simon Horman <simon.horman@corigine.com> Link: https://lore.kernel.org/r/ZHo0vwquhOy3FaXc@decadent.org.uk Signed-off-by:
Jakub Kicinski <kuba@kernel.org> Signed-off-by:
-
Eric Dumazet authored
[ Upstream commit 886bc7d6 ] rtm_tca_policy is used from net/sched/sch_api.c and net/sched/cls_api.c, thus should be declared in an include file. This fixes the following sparse warning: net/sched/sch_api.c:1434:25: warning: symbol 'rtm_tca_policy' was not declared. Should it be static? Fixes: e331473f ("net/sched: cls_api: add missing validation of netlink attributes") Signed-off-by:
Eric Dumazet <edumazet@google.com> Acked-by:
Jamal Hadi Salim <jhs@mojatatu.com> Signed-off-by:
David S. Miller <davem@davemloft.net> Signed-off-by:
-
Eric Dumazet authored
[ Upstream commit 5c3b74a9 ] Add READ_ONCE()/WRITE_ONCE() on accesses to the sock flow table. This also prevents a (smart ?) compiler to remove the condition in: if (table->ents[index] != newval) table->ents[index] = newval; We need the condition to avoid dirtying a shared cache line. Fixes: fec5e652 ("rfs: Receive Flow Steering") Signed-off-by:
Kuniyuki Iwashima <kuniyu@amazon.com> Signed-off-by:
-
Eric Dumazet authored
[ Upstream commit 1e5c647c ] Add READ_ONCE()/WRITE_ONCE() on accesses to sk->sk_rxhash. This also prevents a (smart ?) compiler to remove the condition in: if (sk->sk_rxhash != newval) sk->sk_rxhash = newval; We need the condition to avoid dirtying a shared cache line. Fixes: fec5e652 ("rfs: Receive Flow Steering") Signed-off-by:
-
Sungwoo Kim authored
[ Upstream commit 75767213 ] When receiving a connect response we should make sure that the DCID is within the valid range and that we don't already have another channel allocated for the same DCID. Missing checks may violate the specification (BLUETOOTH CORE SPECIFICATION Version 5.4 | Vol 3, Part A, Page 1046). Fixes: 40624183 ("Bluetooth: L2CAP: Add missing checks for invalid LE DCID") Signed-off-by:
Sungwoo Kim <iam@sung-woo.kim> Signed-off-by:
-
Ying Hsu authored
[ Upstream commit 02c5ea52 ] L2CAP assumes that the locks conn->chan_lock and chan->lock are acquired in the order conn->chan_lock, chan->lock to avoid potential deadlock. For example, l2sock_shutdown acquires these locks in the order: mutex_lock(&conn->chan_lock) l2cap_chan_lock(chan) However, l2cap_disconnect_req acquires chan->lock in l2cap_get_chan_by_scid first and then acquires conn->chan_lock before calling l2cap_chan_del. This means that these locks are acquired in unexpected order, which leads to potential deadlock: l2cap_chan_lock(c) mutex_lock(&conn->chan_lock) This patch releases chan->lock before acquiring the conn_chan_lock to avoid the potential deadlock. Fixes: a2a9339e ("Bluetooth: L2CAP: Fix use-after-free in l2cap_disconnect_{req,rsp}") Signed-off-by:
Ying Hsu <yinghsu@chromium.org> Signed-off-by:
-
Stephan Gerhold authored
[ Upstream commit 0c331fd1 ] It is usually better to request all necessary resources (clocks, regulators, ...) before starting to make use of them. That way they do not change state in case one of the resources is not available yet and probe deferral (-EPROBE_DEFER) is necessary. This is particularly important for DMA channels and IOMMUs which are not enforced by fw_devlink yet (unless you use fw_devlink.strict=1). spi-qup does this in the wrong order, the clocks are enabled and disabled again when the DMA channels are not available yet. This causes issues in some cases: On most SoCs one of the SPI QUP clocks is shared with the UART controller. When using earlycon UART is actively used during boot but might not have probed yet, usually for the same reason (waiting for the DMA controller). In this case, the brief enable/disable cycle ends up gating the clock and further UART console output will halt the system completely. Avoid this by requesting the DMA channels before changing the clock state. Fixes: 612762e8 ("spi: qup: Add DMA capabilities") Signed-off-by:
Stephan Gerhold <stephan@gerhold.net> Link: https://lore.kernel.org/r/20230518-spi-qup-clk-defer-v1-1-f49fc9ca4e02@gerhold.net Signed-off-by:
Mark Brown <broonie@kernel.org> Signed-off-by:
-
Greg Kroah-Hartman authored
Not upstream as it was fixed in a much larger api change in newer kernels. gcc-13 rightfully complains that enum is not the same as an int, so fix up the function prototypes in i40e_alloc.h to be correct, solving a bunch of build warnings. Signed-off-by: -
Greg Kroah-Hartman authored
Not upstream as this function is no longer around anymore. The function i40iw_manage_apbvt() has the wrong prototype match from the .h file to the .c declaration, so fix it up, otherwise gcc-13 complains (rightfully) that the type is incorrect. Signed-off-by:
-
- Jun 09, 2023
-
-
Greg Kroah-Hartman authored
Link: https://lore.kernel.org/r/20230607200835.310274198@linuxfoundation.org Tested-by:
-
Ping-Ke Shih authored
commit 93fbc1eb upstream. Since IQK could spend time, we make a cache of IQK result matrix that looks like iqk_matrix[channel_idx].val[x][y], and we can reload the matrix if we have made a cache. To determine a cache is made, we check iqk_matrix[channel_idx].val[0][0]. The initial commit 7274a8c2 ("rtlwifi: rtl8192de: Merge phy routines") make a mistake that checks incorrect iqk_matrix[channel_idx].val[0] that is always true, and this mistake is found by commit ee3db469 ("wifi: rtlwifi: remove always-true condition pointed out by GCC 12"), so I recall the vendor driver to find fix and apply the correctness. Fixes: 7274a8c2 ("rtlwifi: rtl8192de: Merge phy routines") Signed-off-by:
Ping-Ke Shih <pkshih@realtek.com> Signed-off-by:
Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/20220801113345.42016-1-pkshih@realtek.com Signed-off-by:
-
Al Viro authored
commit fb4554c2 upstream. Descriptor table is a shared resource; two fget() on the same descriptor may return different struct file references. get_tap_ptr_ring() is called after we'd found (and pinned) the socket we'll be using and it tries to find the private tun/tap data structures associated with it. Redoing the lookup by the same file descriptor we'd used to get the socket is racy - we need to same struct file. Thanks to Jason for spotting a braino in the original variant of patch - I'd missed the use of fd == -1 for disabling backend, and in that case we can end up with sock == NULL and sock != oldsock. Cc: stable@kernel.org Acked-by:
Michael S. Tsirkin <mst@redhat.com> Signed-off-by:
Jason Wang <jasowang@redhat.com> Signed-off-by:
Al Viro <viro@zeniv.linux.org.uk> [4.14: Account for get_tap_skb_array() instead of get_tap_ptr_ring()] Signed-off-by:
Samuel Mendoza-Jonas <samjonas@amazon.com> Signed-off-by:
-
Tudor Ambarus authored
commit 7e01c7f7 upstream. Currently in cdc_ncm_check_tx_max(), if dwNtbOutMaxSize is lower than the calculated "min" value, but greater than zero, the logic sets tx_max to dwNtbOutMaxSize. This is then used to allocate a new SKB in cdc_ncm_fill_tx_frame() where all the data is handled. For small values of dwNtbOutMaxSize the memory allocated during alloc_skb(dwNtbOutMaxSize, GFP_ATOMIC) will have the same size, due to how size is aligned at alloc time: size = SKB_DATA_ALIGN(size); size += SKB_DATA_ALIGN(sizeof(struct skb_shared_info)); Thus we hit the same bug that we tried to squash with commit 2be6d4d1 ("net: cdc_ncm: Allow for dwNtbOutMaxSize to be unset or zero") Low values of dwNtbOutMaxSize do not cause an issue presently because at alloc_skb() time more memory (512b) is allocated than required for the SKB headers alone (320b), leaving some space (512b - 320b = 192b) for CDC data (172b). However, if more elements (for example 3 x u64 = [24b]) were added to one of the SKB header structs, say 'struct skb_shared_info', increasing its original size (320b [320b aligned]) to something larger (344b [384b aligned]), then suddenly the CDC data (172b) no longer fits in the spare SKB data area (512b - 384b = 128b). Consequently the SKB bounds checking semantics fails and panics: skbuff: skb_over_panic: text:ffffffff831f755b len:184 put:172 head:ffff88811f1c6c00 data:ffff88811f1c6c00 tail:0xb8 end:0x80 dev:<NULL> ------------[ cut here ]------------ kernel BUG at net/core/skbuff.c:113! invalid opcode: 0000 [#1] PREEMPT SMP KASAN CPU: 0 PID: 57 Comm: kworker/0:2 Not tainted 5.15.106-syzkaller-00249-g19c0ed55a470 #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 04/14/2023 Workqueue: mld mld_ifc_work RIP: 0010:skb_panic net/core/skbuff.c:113 [inline] RIP: 0010:skb_over_panic+0x14c/0x150 net/core/skbuff.c:118 [snip] Call Trace: <TASK> skb_put+0x151/0x210 net/core/skbuff.c:2047 skb_put_zero include/linux/skbuff.h:2422 [inline] cdc_ncm_ndp16 drivers/net/usb/cdc_ncm.c:1131 [inline] cdc_ncm_fill_tx_frame+0x11ab/0x3da0 drivers/net/usb/cdc_ncm.c:1308 cdc_ncm_tx_fixup+0xa3/0x100 Deal with too low values of dwNtbOutMaxSize, clamp it in the range [USB_CDC_NCM_NTB_MIN_OUT_SIZE, CDC_NCM_NTB_MAX_SIZE_TX]. We ensure enough data space is allocated to handle CDC data by making sure dwNtbOutMaxSize is not smaller than USB_CDC_NCM_NTB_MIN_OUT_SIZE. Fixes: 289507d3 ("net: cdc_ncm: use sysfs for rx/tx aggregation tuning") Cc: stable@vger.kernel.org Reported-by:
<syzbot+9f575a1f15fc0c01ed69@syzkaller.appspotmail.com> Link: https://syzkaller.appspot.com/bug?extid=b982f1059506db48409d Link: https://lore.kernel.org/all/20211202143437.1411410-1-lee.jones@linaro.org/ Signed-off-by:
Tudor Ambarus <tudor.ambarus@linaro.org> Reviewed-by:
-
Alexander Bersenev authored
commit 5d0ab06b upstream. The ndp32->wLength is two bytes long, so replace cpu_to_le32 with cpu_to_le16. Fixes: 0fa81b30 ("cdc_ncm: Implement the 32-bit version of NCM Transfer Block") Signed-off-by:
Alexander Bersenev <bay@hackerdom.ru> Signed-off-by:
-
Alexander Bersenev authored
commit 0fa81b30 upstream. The NCM specification defines two formats of transfer blocks: with 16-bit fields (NTB-16) and with 32-bit fields (NTB-32). Currently only NTB-16 is implemented. This patch adds the support of NTB-32. The motivation behind this is that some devices such as E5785 or E5885 from the current generation of Huawei LTE routers do not support NTB-16. The previous generations of Huawei devices are also use NTB-32 by default. Also this patch enables NTB-32 by default for Huawei devices. During the 2019 ValdikSS made five attempts to contact Huawei to add the NTB-16 support to their router firmware, but they were unsuccessful. Signed-off-by:
-
Ben Hutchings authored
adpt_isr() reads reply addresses from a hardware register, which should always be within the DMA address range of the device's pool of reply address buffers. In case the address is out of range, it tries to muddle on, converting to a virtual address using bus_to_virt(). bus_to_virt() does not take DMA addresses, and it doesn't make sense to try to handle the completion in this case. Ignore it and continue looping to service the interrupt. If a completion has been lost then the SCSI core should eventually time-out and trigger a reset. There is no corresponding upstream commit, because this driver was removed upstream. Fixes: 67af2b06 ("[SCSI] dpt_i2o: move from virt_to_bus/bus_to_virt ...") Signed-off-by:
Ben Hutchings <benh@debian.org> Signed-off-by:
-
Ben Hutchings authored
adpt_i2o_passthru() takes a user-provided message and passes it through to the hardware with appropriate translation of addresses and message IDs. It has a number of bugs: - When a message requires scatter/gather, it doesn't verify that the offset to the scatter/gather list is less than the message size. - When a message requires scatter/gather, it overwrites the DMA addresses with the user-space virtual addresses before unmapping the DMA buffers. - It reads the message from user memory multiple times. This allows user-space to change the message and bypass validation. - It assumes that the message is at least 4 words long, but doesn't check that. I tried fixing these, but even the maintainer of the corresponding user-space in Debian doesn't have the hardware any more. Instead, remove the pass-through ioctl (I2OUSRCMD) and supporting code. There is no corresponding upstream commit, because this driver was removed upstream. Fixes: 1da177e4 ("Linux-2.6.12-rc2") Fixes: 67af2b06 ("[SCSI] dpt_i2o: move from virt_to_bus/bus_to_virt ...") Signed-off-by:
-
Helge Deller authored
commit d78bd6cc upstream. syzbot repored this bug in the softcursor code: BUG: KASAN: null-ptr-deref in soft_cursor+0x384/0x6b4 drivers/video/fbdev/core/softcursor.c:70 Read of size 16 at addr 0000000000000200 by task kworker/u4:1/12 CPU: 0 PID: 12 Comm: kworker/u4:1 Not tainted 6.4.0-rc3-syzkaller-geb0f1697d729 #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 04/28/2023 Workqueue: events_power_efficient fb_flashcursor Call trace: dump_backtrace+0x1b8/0x1e4 arch/arm64/kernel/stacktrace.c:233 show_stack+0x2c/0x44 arch/arm64/kernel/stacktrace.c:240 __dump_stack lib/dump_stack.c:88 [inline] dump_stack_lvl+0xd0/0x124 lib/dump_stack.c:106 print_report+0xe4/0x514 mm/kasan/report.c:465 kasan_report+0xd4/0x130 mm/kasan/report.c:572 kasan_check_range+0x264/0x2a4 mm/kasan/generic.c:187 __asan_memcpy+0x3c/0x84 mm/kasan/shadow.c:105 soft_cursor+0x384/0x6b4 drivers/video/fbdev/core/softcursor.c:70 bit_cursor+0x113c/0x1a64 drivers/video/fbdev/core/bitblit.c:377 fb_flashcursor+0x35c/0x54c drivers/video/fbdev/core/fbcon.c:380 process_one_work+0x788/0x12d4 kernel/workqueue.c:2405 worker_thread+0x8e0/0xfe8 kernel/workqueue.c:2552 kthread+0x288/0x310 kernel/kthread.c:379 ret_from_fork+0x10/0x20 arch/arm64/kernel/entry.S:853 This fix let bit_cursor() bail out early when a font bitmap isn't available yet. Signed-off-by:
Helge Deller <deller@gmx.de> Reported-by:
<syzbot+d910bd780e6efac35869@syzkaller.appspotmail.com> Acked-by:
Sam Ravnborg <sam@ravnborg.org> Cc: stable@kernel.org Signed-off-by:
-
Theodore Ts'o authored
commit aff3bea9 upstream. Treat i_data_sem for ea_inodes as being in their own lockdep class to avoid lockdep complaints about ext4_setattr's use of inode_lock() on normal inodes potentially causing lock ordering with i_data_sem on ea_inodes in ext4_xattr_inode_write(). However, ea_inodes will be operated on by ext4_setattr(), so this isn't a problem. Cc: stable@kernel.org Link: https://syzkaller.appspot.com/bug?extid=298c5d8fb4a128bc27b0 Reported-by:
<syzbot+298c5d8fb4a128bc27b0@syzkaller.appspotmail.com> Signed-off-by:
-
Paul Moore authored
commit 42c4e97e upstream. The Linux Kernel currently only requires make v3.82 while the grouped target functionality requires make v4.3. Removed the grouped target introduced in 4ce1f694 ("selinux: ensure av_permissions.h is built when needed") as well as the multiple header file targets in the make rule. This effectively reverts the problem commit. We will revisit this change when make >= 4.3 is required by the rest of the kernel. Cc: stable@vger.kernel.org Fixes: 4ce1f694 ("selinux: ensure av_permissions.h is built when needed") Reported-by:
Erwan Velu <e.velu@criteo.com> Reported-by:
Luiz Capitulino <luizcap@amazon.com> Tested-by:
Paul Moore <paul@paul-moore.com> Signed-off-by:
-
Sherry Sun authored
commit 2474e054 upstream. LPUART IP now has two known bugs, one is that CTS has higher priority than the break signal, which causes the break signal sending through UARTCTRL_SBK may impacted by the CTS input if the HW flow control is enabled. It exists on all platforms we support in this driver. So we add a workaround patch for this issue: commit c4c81db5 ("tty: serial: fsl_lpuart: disable the CTS when send break signal"). Another IP bug is i.MX8QM LPUART may have an additional break character being sent after SBK was cleared. It may need to add some delay between clearing SBK and re-enabling CTS to ensure that the SBK latch are completely cleared. But we found that during the delay period before CTS is enabled, there is still a risk that Bluetooth data in TX FIFO may be sent out during this period because of break off and CTS disabled(even if BT sets CTS line deasserted, data is still sent to BT). Due to this risk, we have to drop the CTS-disabling workaround for SBK bugs, use TXINV seems to be a better way to replace SBK feature and avoid above risk. Also need to disable the transmitter to prevent any data from being sent out during break, then invert the TX line to send break. Then disable the TXINV when turn off break and re-enable transmitter. Fixes: c4c81db5 ("tty: serial: fsl_lpuart: disable the CTS when send break signal") Cc: stable <stable@kernel.org> Signed-off-by:
Sherry Sun <sherry.sun@nxp.com> Link: https://lore.kernel.org/r/20230519094751.28948-1-sherry.sun@nxp.com Signed-off-by:
-
Deren Wu authored
commit a99d21ce upstream. We may get an empty response with zero length at the beginning of the driver start and get following UBSAN error. Since there is no content(SDRT_NONE) for the response, just return and skip the response handling to avoid this problem. Test pass : SDIO wifi throughput test with this patch [ 126.980684] UBSAN: array-index-out-of-bounds in drivers/mmc/host/vub300.c:1719:12 [ 126.980709] index -1 is out of range for type 'u32 [4]' [ 126.980729] CPU: 4 PID: 9 Comm: kworker/u16:0 Tainted: G E 6.3.0-rc4-mtk-local-202304272142 #1 [ 126.980754] Hardware name: Intel(R) Client Systems NUC8i7BEH/NUC8BEB, BIOS BECFL357.86A.0081.2020.0504.1834 05/04/2020 [ 126.980770] Workqueue: kvub300c vub300_cmndwork_thread [vub300] [ 126.980833] Call Trace: [ 126.980845] <TASK> [ 126.980860] dump_stack_lvl+0x48/0x70 [ 126.980895] dump_stack+0x10/0x20 [ 126.980916] ubsan_epilogue+0x9/0x40 [ 126.980944] __ubsan_handle_out_of_bounds+0x70/0x90 [ 126.980979] vub300_cmndwork_thread+0x58e7/0x5e10 [vub300] [ 126.981018] ? _raw_spin_unlock+0x18/0x40 [ 126.981042] ? finish_task_switch+0x175/0x6f0 [ 126.981070] ? __switch_to+0x42e/0xda0 [ 126.981089] ? __switch_to_asm+0x3a/0x80 [ 126.981129] ? __pfx_vub300_cmndwork_thread+0x10/0x10 [vub300] [ 126.981174] ? __kasan_check_read+0x11/0x20 [ 126.981204] process_one_work+0x7ee/0x13d0 [ 126.981246] worker_thread+0x53c/0x1240 [ 126.981291] kthread+0x2b8/0x370 [ 126.981312] ? __pfx_worker_thread+0x10/0x10 [ 126.981336] ? __pfx_kthread+0x10/0x10 [ 126.981359] ret_from_fork+0x29/0x50 [ 126.981400] </TASK> Fixes: 88095e7b ("mmc: Add new VUB300 USB-to-SD/SDIO/MMC driver") Signed-off-by:
Deren Wu <deren.wu@mediatek.com> Cc: stable@vger.kernel.org Link: https://lore.kernel.org/r/048cd6972c50c33c2e8f81d5228fed928519918b.1683987673.git.deren.wu@mediatek.com Signed-off-by:
Ulf Hansson <ulf.hansson@linaro.org> Signed-off-by:
-
Nathan Chancellor authored
commit 5a7d7d0f upstream. Clang warns that the address of a pointer will always evaluated as true in a boolean context: drivers/regulator/da9052-regulator.c:423:22: warning: address of array 'pdata->regulators' will always evaluate to 'true' [-Wpointer-bool-conversion] if (pdata && pdata->regulators) { ~~ ~~~~~~~^~~~~~~~~~ drivers/regulator/da9055-regulator.c:615:22: warning: address of array 'pdata->regulators' will always evaluate to 'true' [-Wpointer-bool-conversion] if (pdata && pdata->regulators) { ~~ ~~~~~~~^~~~~~~~~~ Link: https://github.com/ClangBuiltLinux/linux/issues/142 Signed-off-by:
Nathan Chancellor <natechancellor@gmail.com> Signed-off-by:
-
Jakub Kicinski authored
commit ee3db469 upstream. The .value is a two-dim array, not a pointer. struct iqk_matrix_regs { bool iqk_done; long value[1][IQK_MATRIX_REG_NUM]; }; Acked-by:
-
