Build initramfs images only once

Place custom mkinitcpio.conf in airootfs.
Use a custom mkinitcpio preset to specify generated image file path.

configs/baseline/airootfs/etc/mkinitcpio.conf

+#
+# SPDX-License-Identifier: GPL-3.0-or-later
+
+# vim:set ft=sh
+# MODULES
+# The following modules are loaded before any boot hooks are
+# run.  Advanced users may wish to specify all system modules
+# in this array.  For instance:
+#     MODULES=(piix ide_disk reiserfs)
+MODULES=()
+
+# BINARIES
+# This setting includes any additional binaries a given user may
+# wish into the CPIO image.  This is run last, so it may be used to
+# override the actual binaries included by a given hook
+# BINARIES are dependency parsed, so you may safely ignore libraries
+BINARIES=()
+
+# FILES
+# This setting is similar to BINARIES above, however, files are added
+# as-is and are not parsed in any way.  This is useful for config files.
+FILES=()
+
+# HOOKS
+# This is the most important setting in this file.  The HOOKS control the
+# modules and scripts added to the image, and what happens at boot time.
+# Order is important, and it is recommended that you do not change the
+# order in which HOOKS are added.  Run 'mkinitcpio -H <hook name>' for
+# help on a given hook.
+# 'base' is _required_ unless you know precisely what you are doing.
+# 'udev' is _required_ in order to automatically load modules
+# 'filesystems' is _required_ unless you specify your fs modules in MODULES
+# Examples:
+##   This setup specifies all modules in the MODULES setting above.
+##   No raid, lvm2, or encrypted root is needed.
+#    HOOKS=(base)
+#
+##   This setup will autodetect all modules for your system and should
+##   work as a sane default
+#    HOOKS=(base udev autodetect block filesystems)
+#
+##   This setup will generate a 'full' image which supports most systems.
+##   No autodetection is done.
+#    HOOKS=(base udev block filesystems)
+#
+##   This setup assembles a pata mdadm array with an encrypted root FS.
+##   Note: See 'mkinitcpio -H mdadm' for more information on raid devices.
+#    HOOKS=(base udev block mdadm encrypt filesystems)
+#
+##   This setup loads an lvm2 volume group on a usb device.
+#    HOOKS=(base udev block lvm2 filesystems)
+#
+##   NOTE: If you have /usr on a separate partition, you MUST include the
+#    usr, fsck and shutdown hooks.
+HOOKS=(base udev archiso block filesystems)
+
+# COMPRESSION
+# Use this to compress the initramfs image. By default, gzip compression
+# is used. Use 'cat' to create an uncompressed image.
+#COMPRESSION="gzip"
+#COMPRESSION="bzip2"
+#COMPRESSION="lzma"
+#COMPRESSION="xz"
+#COMPRESSION="lzop"
+#COMPRESSION="lz4"
+
+# COMPRESSION_OPTIONS
+# Additional options for the compressor
+#COMPRESSION_OPTIONS=()

configs/baseline/airootfs/etc/mkinitcpio.d/linux.preset

+#
+# SPDX-License-Identifier: GPL-3.0-or-later
+
+# mkinitcpio preset file for the 'linux' package on archiso
+
+PRESETS=('archiso')
+
+ALL_kver='/boot/vmlinuz-linux'
+ALL_config='/etc/mkinitcpio.conf'
+
+archiso_image="/boot/archiso.img"

configs/baseline/build.sh

@@ -56,6 +56,11 @@ make_custom_airootfs() {
              done < "${_airootfs}/etc/passwd"
         fi
     fi
+
+    mkdir -p -- "${work_dir}/airootfs/etc/initcpio/hooks"
+    mkdir -p -- "${work_dir}/airootfs/etc/initcpio/install"
+    cp /usr/lib/initcpio/hooks/archiso "${work_dir}/airootfs/etc/initcpio/hooks/"
+    cp /usr/lib/initcpio/install/archiso "${work_dir}/airootfs/etc/initcpio/install/"
 }
 
 # Packages (airootfs)
@@ -64,17 +69,6 @@ make_packages() {
         -p "$(grep -h -v '^#' "${script_path}/packages.x86_64"| sed ':a;N;$!ba;s/\n/ /g')" install
 }
 
-# Copy mkinitcpio archiso hooks and build initramfs (airootfs)
-make_setup_mkinitcpio() {
-    mkdir -p "${work_dir}/airootfs/etc/initcpio/hooks"
-    mkdir -p "${work_dir}/airootfs/etc/initcpio/install"
-    cp /usr/lib/initcpio/hooks/archiso "${work_dir}/airootfs/etc/initcpio/hooks"
-    cp /usr/lib/initcpio/install/archiso "${work_dir}/airootfs/etc/initcpio/install"
-    cp "${script_path}/mkinitcpio.conf" "${work_dir}/airootfs/etc/mkinitcpio-archiso.conf"
-    mkarchiso -v -w "${work_dir}" -D "${install_dir}" \
-        -r 'mkinitcpio -c /etc/mkinitcpio-archiso.conf -k /boot/vmlinuz-linux -g /boot/archiso.img' run
-}
-
 # Prepare ${install_dir}/boot/
 make_boot() {
     mkdir -p "${work_dir}/iso/${install_dir}/boot/${arch}"
@@ -118,7 +112,6 @@ make_iso() {
 run_once make_custom_airootfs
 run_once make_pacman_conf
 run_once make_packages
-run_once make_setup_mkinitcpio
 run_once make_boot
 run_once make_syslinux
 run_once make_isolinux

configs/baseline/mkinitcpio.conf

-#
-# SPDX-License-Identifier: GPL-3.0-or-later
-
-HOOKS=(base udev archiso block filesystems)

configs/releng/airootfs/etc/mkinitcpio.conf

+#
+# SPDX-License-Identifier: GPL-3.0-or-later
+
+# vim:set ft=sh
+# MODULES
+# The following modules are loaded before any boot hooks are
+# run.  Advanced users may wish to specify all system modules
+# in this array.  For instance:
+#     MODULES=(piix ide_disk reiserfs)
+MODULES=()
+
+# BINARIES
+# This setting includes any additional binaries a given user may
+# wish into the CPIO image.  This is run last, so it may be used to
+# override the actual binaries included by a given hook
+# BINARIES are dependency parsed, so you may safely ignore libraries
+BINARIES=()
+
+# FILES
+# This setting is similar to BINARIES above, however, files are added
+# as-is and are not parsed in any way.  This is useful for config files.
+FILES=()
+
+# HOOKS
+# This is the most important setting in this file.  The HOOKS control the
+# modules and scripts added to the image, and what happens at boot time.
+# Order is important, and it is recommended that you do not change the
+# order in which HOOKS are added.  Run 'mkinitcpio -H <hook name>' for
+# help on a given hook.
+# 'base' is _required_ unless you know precisely what you are doing.
+# 'udev' is _required_ in order to automatically load modules
+# 'filesystems' is _required_ unless you specify your fs modules in MODULES
+# Examples:
+##   This setup specifies all modules in the MODULES setting above.
+##   No raid, lvm2, or encrypted root is needed.
+#    HOOKS=(base)
+#
+##   This setup will autodetect all modules for your system and should
+##   work as a sane default
+#    HOOKS=(base udev autodetect block filesystems)
+#
+##   This setup will generate a 'full' image which supports most systems.
+##   No autodetection is done.
+#    HOOKS=(base udev block filesystems)
+#
+##   This setup assembles a pata mdadm array with an encrypted root FS.
+##   Note: See 'mkinitcpio -H mdadm' for more information on raid devices.
+#    HOOKS=(base udev block mdadm encrypt filesystems)
+#
+##   This setup loads an lvm2 volume group on a usb device.
+#    HOOKS=(base udev block lvm2 filesystems)
+#
+##   NOTE: If you have /usr on a separate partition, you MUST include the
+#    usr, fsck and shutdown hooks.
+HOOKS=(base udev memdisk archiso_shutdown archiso archiso_loop_mnt archiso_pxe_common archiso_pxe_nbd archiso_pxe_http archiso_pxe_nfs archiso_kms block filesystems keyboard)
+
+# COMPRESSION
+# Use this to compress the initramfs image. By default, gzip compression
+# is used. Use 'cat' to create an uncompressed image.
+#COMPRESSION="gzip"
+#COMPRESSION="bzip2"
+#COMPRESSION="lzma"
+COMPRESSION="xz"
+#COMPRESSION="lzop"
+#COMPRESSION="lz4"
+
+# COMPRESSION_OPTIONS
+# Additional options for the compressor
+#COMPRESSION_OPTIONS=()

configs/releng/airootfs/etc/mkinitcpio.d/linux.preset

+#
+# SPDX-License-Identifier: GPL-3.0-or-later
+
+# mkinitcpio preset file for the 'linux' package on archiso
+
+PRESETS=('archiso')
+
+ALL_kver='/boot/vmlinuz-linux'
+ALL_config='/etc/mkinitcpio.conf'
+
+archiso_image="/boot/archiso.img"

configs/releng/build.sh

@@ -86,44 +86,31 @@ make_custom_airootfs() {
              done < "${_airootfs}/etc/passwd"
         fi
     fi
-}
-
-# Packages (airootfs)
-make_packages() {
-    if [ -n "${verbose}" ]; then
-        mkarchiso -v -w "${work_dir}/x86_64" -C "${work_dir}/pacman.conf" -D "${install_dir}" \
-            -p "$(grep -h -v '^#' "${script_path}/packages.x86_64"| sed ':a;N;$!ba;s/\n/ /g')" install
-    else
-        mkarchiso -w "${work_dir}/x86_64" -C "${work_dir}/pacman.conf" -D "${install_dir}" \
-            -p "$(grep -h -v '^#' "${script_path}/packages.x86_64"| sed ':a;N;$!ba;s/\n/ /g')" install
-    fi
-}
 
-# Copy mkinitcpio archiso hooks and build initramfs (airootfs)
-make_setup_mkinitcpio() {
     local _hook
-    mkdir -p "${work_dir}/x86_64/airootfs/etc/initcpio/hooks"
-    mkdir -p "${work_dir}/x86_64/airootfs/etc/initcpio/install"
+    mkdir -p -- "${work_dir}/x86_64/airootfs/etc/initcpio/hooks"
+    mkdir -p -- "${work_dir}/x86_64/airootfs/etc/initcpio/install"
     for _hook in archiso archiso_shutdown archiso_pxe_common archiso_pxe_nbd archiso_pxe_http archiso_pxe_nfs archiso_loop_mnt; do
-        cp "/usr/lib/initcpio/hooks/${_hook}" "${work_dir}/x86_64/airootfs/etc/initcpio/hooks"
-        cp "/usr/lib/initcpio/install/${_hook}" "${work_dir}/x86_64/airootfs/etc/initcpio/install"
+        cp "/usr/lib/initcpio/hooks/${_hook}" "${work_dir}/x86_64/airootfs/etc/initcpio/hooks/"
+        cp "/usr/lib/initcpio/install/${_hook}" "${work_dir}/x86_64/airootfs/etc/initcpio/install/"
     done
     sed -i "s|/usr/lib/initcpio/|/etc/initcpio/|g" "${work_dir}/x86_64/airootfs/etc/initcpio/install/archiso_shutdown"
-    cp /usr/lib/initcpio/install/archiso_kms "${work_dir}/x86_64/airootfs/etc/initcpio/install"
-    cp /usr/lib/initcpio/archiso_shutdown "${work_dir}/x86_64/airootfs/etc/initcpio"
-    cp "${script_path}/mkinitcpio.conf" "${work_dir}/x86_64/airootfs/etc/mkinitcpio-archiso.conf"
+    cp /usr/lib/initcpio/install/archiso_kms "${work_dir}/x86_64/airootfs/etc/initcpio/install/"
+    cp /usr/lib/initcpio/archiso_shutdown "${work_dir}/x86_64/airootfs/etc/initcpio/"
+}
+
+# Packages (airootfs)
+make_packages() {
     if [[ "${gpg_key}" ]]; then
       gpg --export "${gpg_key}" > "${work_dir}/gpgkey"
       exec 17<>"${work_dir}/gpgkey"
     fi
     if [ -n "${verbose}" ]; then
-        ARCHISO_GNUPG_FD="${gpg_key:+17}" mkarchiso -v -w "${work_dir}/x86_64" -C "${work_dir}/pacman.conf" \
-            -D "${install_dir}" \
-            -r 'mkinitcpio -c /etc/mkinitcpio-archiso.conf -k /boot/vmlinuz-linux -g /boot/archiso.img' run
+        ARCHISO_GNUPG_FD="${gpg_key:+17}" mkarchiso -v -w "${work_dir}/x86_64" -C "${work_dir}/pacman.conf" -D "${install_dir}" \
+            -p "$(grep -h -v '^#' "${script_path}/packages.x86_64"| sed ':a;N;$!ba;s/\n/ /g')" install
     else
-        ARCHISO_GNUPG_FD="${gpg_key:+17}" mkarchiso -w "${work_dir}/x86_64" -C "${work_dir}/pacman.conf" \
-            -D "${install_dir}" \
-            -r 'mkinitcpio -c /etc/mkinitcpio-archiso.conf -k /boot/vmlinuz-linux -g /boot/archiso.img' run
+        ARCHISO_GNUPG_FD="${gpg_key:+17}" mkarchiso -w "${work_dir}/x86_64" -C "${work_dir}/pacman.conf" -D "${install_dir}" \
+            -p "$(grep -h -v '^#' "${script_path}/packages.x86_64"| sed ':a;N;$!ba;s/\n/ /g')" install
     fi
     if [[ "${gpg_key}" ]]; then
       exec 17<&-
@@ -321,7 +308,6 @@ run_once make_pacman_conf
 run_once make_custom_airootfs
 run_once make_packages
 run_once make_customize_airootfs
-run_once make_setup_mkinitcpio
 run_once make_boot
 run_once make_boot_extra
 run_once make_syslinux

configs/releng/mkinitcpio.conf

-#
-# SPDX-License-Identifier: GPL-3.0-or-later
-
-HOOKS=(base udev memdisk archiso_shutdown archiso archiso_loop_mnt archiso_pxe_common archiso_pxe_nbd archiso_pxe_http archiso_pxe_nfs archiso_kms block filesystems keyboard)
-COMPRESSION="xz"